• Structural Engineering and Mechanics
• /
• v.61 no.1
• /
• pp.49-63
• /
• 2017

This paper presents an original hyperbolic (first present model) and parabolic (second present model) shear and normal deformation theory for the bending analysis to account for the effect of thickness stretching in functionally graded sandwich plates. Indeed, the number of unknown functions involved in these presents theories is only five, as opposed to six or even greater numbers in the case of other shear and normal deformation theories. The present theory accounts for both shear deformation and thickness stretching effects by a hyperbolic variation of ail displacements across the thickness and satisfies the stress-free boundary conditions on the upper and lower surfaces of the plate without requiring any shear correction factor. It is evident from the present analyses; the thickness stretching effect is more pronounced for thick plates and it needs to be taken into consideration in more physically realistic simulations. The numerical results are compared with 3D exact solution, quasi-3-dimensional solutions and with other higher-order shear deformation theories, and the superiority of the present theory can be noticed.

• Steel and Composite Structures
• /
• v.5 no.2_3
• /
• pp.181-192
• /
• 2005

The effective length method for flexural (column) buckling has been used for many decades but its use is somewhat limited in various contemporary design codes to moderately slender structures with elastic critical load factor (${\lambda}_{cr}$) less than 3 to 5. In pace with the use of higher grade steel in recent years, the influence of buckling in axial buckling resistance of a column becomes more important and the over-simplified assumption of effective length factor can lead to an unsafe, an uneconomical or a both unsafe and uneconomical solution when some members are over-designed while key elements are under-designed. Effective length should not normally be taken as the distance between nodes multiplied by an arbitrary factor like 0.85, 1.0, 2.0 etc. Further, the classification of non-sway and sway-sensitive frames makes the conventional design procedure tedious to use and, more importantly, limited to simple regular frames. This paper describes the practical use of second-order analysis with section capacity check allowing for $P-{\delta}$ and $P-{\Delta}$ effects together with member and system imperfections. Most commercial software considers only the $P-{\Delta}$ effect, but not member and frame imperfections nor $P-{\delta}$ effect, and engineers must be very careful in their uses. A verification problem is also given for validation of software for this type of powerful second-order analysis and design. It is a trend for popular and advanced national design codes in using the second-order analysis as a norm for analysis and design of steel structures while linear analysis may only be used in very simple structures.

• Journal of Ecology and Environment
• /
• v.35 no.3
• /
• pp.227-234
• /
• 2012

Quercus aliena and Q. serrata are both occur as natural vegetation alongside natural freshwater bodies of the southern Korea Peninsula. Q. serrata dominates over Q. aliena as secondary forest vegetation in the present day. In order to explain these natural distributional traits of the oak species, we conducted some experiments with oak seedlings which treated with major important environmental resources, including light, moisture and nutrients, under controlled conditions. We then measured the ecological niche breadths and overlap from 15 eco-morphological characteristics. The ecological niche breadth of Q. aliena and Q. serrata were higher in terms of the nutrient factor applied, but was lower terms of light. The niche breadth of Q. serrata was wider than that of Q. aliena in light and moisture exposure. On the other hand, the niche breadth of Q. aliena was similar with that of Q. serrata in terms of the nutrient factor applied. These results imply that Q. serrata has a broader ecological distribution in over a wider variety of light and moisture environments than that of Q. alien. Ecological niche overlap between two oak species was the widest in terms of the light treatment factor applied, and narrowest in terms of moisture. This response pattern was also verified by cluster and principle component analysis. These results suggest competitive interactions between Q. serrata and Q. aliena seedlings may be higher for light resources than moisture or nutrient resources, and that Q. serrata is more shade tolerant than Q. aliena.

• KCID journal
• /
• v.18 no.1
• /
• pp.25-32
• /
• 2011

In order to effectively manage the reservoir, reservoir water quality management should be based on physicochemical and configurational characteristics. In this research, correlation between factors affecting the reservoir water quality was examined. Chl-a and COD shows the highest positive correlation. Chl-a and T-P also has a high positive correlation, however Chl-a and T-N show lower correlation relatively. Even though T-N is an important factor for phytoplankton growth which increase Chl-a concentration, corelation of Ch1-a and T-N shows that enough nitrogen in the reservoir isn't no longer limiting factor. The age of reservoir can cause of increasing COD and SS. Embankment height and elevation of reservoirs shows strong negative correlation to water quality. That means reservoir which is higher embankment height and locate in higher elevations is less contaminated. Regression expression was derived with Chl-a and water quality parameters, and height of reservoir. Finally Chl-a was simulated using regression expression and it was a good approach to predict the Chl-a concentration.

• Structural Engineering and Mechanics
• /
• v.83 no.5
• /
• pp.609-615
• /
• 2022

A numerical approach for dynamic stability analysis of sandwich plates has been provided using Chebyshev-Ritz-Bolotin approach. The sandwich plate with porous core has been formulated according to a higher-order plate. All of material properties are assumed to be dependent of porosity factor which determines the amount or volume of pores. The sandwich plate has also been assumed to be under periodic in-plane loading of compressive type. It will be shown that stability boundaries of the sandwich plate are dependent on static and dynamical load factors, porosity factor, porosity variation and core thickness.

• The Research Journal of the Costume Culture
• /
• v.8 no.2
• /
• pp.293-304
• /
• 2000

The purpose of this study was to analyze the relationship between materialism and conspicuous consumption, and information sources. Data were administered to 357 women living in Sunchon from June to July 1999. For analysis of the data, factor analysis, t-test, one-way ANOVA, duncan's multiple range test, and multiple regression analysis were employed. The results of this study were summarized as follows. 1) Materialism was shown to have the significant differences according to age, marriage, education, occupation, social stratification groups. The higher the education, occupational status, social stratification groups and the lower the age is, or unmarried, the higher is materialism. The use of information sources were shown to have the significant differences according to age, marriage, education, occupation, income, social stratification groups. The higher the education, income, social stratification groups. The higher the education, income, occupational status, social stratification groups and the lower the age is, or unmarried, the higher is use of information. 2) Materialism was shown to have the significant differences according to the groups of conspicuous consumption. The higher conspicuous consumption is, the higher is materialism. The use of information were shown to have the significant differences according to groups of conspicuous consumption. The higher conspicuous consumption is, the higher is use of information. 3) The use of information were shown to have the significant differences according to materialism. The higher materialism is, the higher is use of information. 4) According to the results of the regression analysis examining the relative influences of variables affecting information, the relative importance of the variables are in order of ; happiness-pursuable materialism, conspicuous consumption and their explanatory power totalled 18.6%.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.4
• /
• pp.405-413
• /
• 2000

This paper present study on the application of sound pressure and vibration signals to detect the presence of defects in a rolling element bearing using a statistical analysis method. The well established statistical parameters such as the crest factor and the distribution of moments including kurtosis and skew are utilized in this study. In addition, other statistical parameters derived from the beta distribution function are also used. A comparison study on the performance of the different types of parameter used is also performed. The statistical analysis is used because of its simplicity and quick computation. Under ideal conditions, the statistical method can be used to identify the different types of defect present in the bearing. In addition, the results also reveal that there is no significant advantages in using the beta function parameters when compared to using kurtosis and the crest factor for detecting and identifying defects in rolling element bearings from both sound and vibration signals.

• Korean Journal of Childcare and Education
• /
• v.14 no.4
• /
• pp.25-41
• /
• 2018

Objective: The purpose of this study was to examine the effects of parent-teacher relationships on mothers' parenting efficacy especially for toddlers. Methods: 225 mothers of toddlers completed questionnaires on parent-teacher relationships and parenting efficacy. This study used technical statistics, Pearson's correlation analysis, and multiple regression analysis in order to analyze the collected data. Results: First, there was a significant correlation between parent-teacher relationships and mothers' parenting efficacy. Second, the parent-teacher relationships was an important factor in predicting mothers' parenting efficacy. In particular, when a teacher and mother develop practical collaboration for caring for and educating a child, the mothers' parenting efficacy was higher. Conclusion/Implications: These findings indicate that the parent-teacher relationship is a significant factor in order to improve the quality of parenting. The results especially support the importance of collaboration between teachers and parents and suggest that we need to find practical ways for collaborating in the field. Limitations of this study and implications for future research were discussed.

• The Research Journal of the Costume Culture
• /
• v.12 no.4
• /
• pp.547-565
• /
• 2004

The purpose of this study was to evaluate the level of SCM activities and the logistics performance by SCM of the three company types in fashion industry· fabric suppliers, apparel manufacturers, and retailers. The level of SCM activities was estimated through the examination of seven factors: commitment and leadership of a top management, flexibility of management, understanding of demand characteristics, integrated management organization, information system, cooperative partnership and communication and exchange of opinion. The logistics performance was measured by improvement in customer service(on time delivery ratio of products, returning rate, treat ratio for A/S, order fill rate, substitute providing capability for being out of stock) and delivery cost reduction. Through questionnaire survey, a total of 214 data for 108 companies of three company types were collected: 46 for 40 fabric suppliers, 123 for 64 apparel manufacturers and 45 for 4 retailers. The analysis of SCM activity levels showed that fabric suppliers had higher degrees in the factor of understanding of demand characteristics, and apparel manufacturers had higher degrees in the factor of information systems. For retailers, the factor of communication and exchange of opinion represented higher degrees. The study on relationship between the SCM activity levels and logistics performance showed that the SCM activity factor of understanding of demand characteristics greatly improved a substitute providing capability for being out of stock in fabric suppliers, and information system improved a substitute providing capability for being out of stock, on time delivery ratio of products and order fill rate in apparel manufacturers. In retailers, the SCM activity factor of understanding of demand characteristics decreased returning rate highly and improved on time delivery ratio of products. The study results showed that SCM activities in fashion industry brought more improvement in customer service levels rather than in delivery cost reduction.

• Journal of Korean Society for Quality Management
• /
• v.38 no.1
• /
• pp.42-51
• /
• 2010

For the fractional factorial designs, the resolution-IV designs can be used when we want to estimate the main effects and to investigate the structure of the non-negligible two-factor interaction effects, when the three-factor and higher order interaction effects are all negligible. However we need to add the additional treatment combinations in order to identify the influential interactions for the resolution-IV fractional factorial designs. In this paper we investigate the statistical structure for 3-level resolution-IV designs constructed by fold-over scheme and introduce a method for analyzing the influential two-factor interactions.