• Smart Structures and Systems
• /
• v.26 no.3
• /
• pp.391-401
• /
• 2020

The present article reports the feasibility of the electrical energy generation from ambient low-frequency vibration using a piezoelectric material mounted on a bimorph cantilever beam actuator. A corresponding higher-order analytical model is developed using MATLAB in conjunction with finite element method under low-frequency with both damped and undamped conditions. An alternate model is also developed to check the material and dimensional viability of both piezoelectric materials (mainly focussed to PVDF and PZT) and the base material. Also, Genetic Algorithm is implemented to find the optimum dimensions which can produce the higher values of voltage at low-frequency frequencies (≤ 100 Hz). The delamination constraints are employed to avoid inter-laminar stresses and to increase the fracture toughness. The delamination has been done using a Teflon sheet sandwiched in between base plates and the piezo material is stuck to the base plate using adhesives. The analytical model is tested for both homogenous and isotropic material characteristics of the base material and extended to investigate the effect of the different geometrical parameters (base plate dimensions, piezo layer dimensions and placement, delamination thickness and placement, excitation frequency) on the model responses of the bimorph cantilever beam. It has been observed that when the base material characteristics are homogenous, the efficiency of the model remains higher when compared to the condition when it is of isotropic material. The necessary convergence behaviour of the current numerical model has been established and checked for the accuracy by comparing with available published results. Finally, using the results obtained from the model, a prototype is fabricated for the experimental validation via a suitable circuit considering Glass fibre and Aluminium as the bimorph material.

• Earthquakes and Structures
• /
• v.17 no.5
• /
• pp.447-462
• /
• 2019

This present paper concerned with the analytic modelling for vibration of the functionally graded (FG) plates resting on non-variable and variable two parameter elastic foundation, based on two-dimensional elasticity using higher shear deformation theory. Our present theory has four unknown, which mean that have less than other higher order and lower theory, and we denote do not require the factor of correction like the first shear deformation theory. The indeterminate integral are introduced in the fields of displacement, it is allowed to reduce the number from five unknown to only four variables. The elastic foundations are assumed a classical model of Winkler-Pasternak with uniform distribution stiffness of the Winkler coefficient (kw), or it is with variables distribution coefficient (kw). The variable's stiffness of elastic foundation is supposed linear, parabolic and trigonometry along the length of functionally plate. The properties of the FG plates vary according to the thickness, following a simple distribution of the power law in terms of volume fractions of the constituents of the material. The equations of motions for natural frequency of the functionally graded plates resting on variables elastic foundation are derived using Hamilton principal. The government equations are resolved, with respect boundary condition for simply supported FG plate, employing Navier series solution. The extensive validation with other works found in the literature and our results are present in this work to demonstrate the efficient and accuracy of this analytic model to predict free vibration of FG plates, with and without the effect of variables elastic foundations.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.4
• /
• pp.138-147
• /
• 2010

As inaccurate traffic volume prediction may result in inadequate transportation planning and design, traffic volume prediction based on traffic volume data is very important in spatial decision making processes such as transportation planning and operation. In order to improve the accuracy of traffic volume prediction, recent studies are using the geostatistical approach called kriging and according to their reports, the method shows high predictability compared to conventional methods. Thus, this study estimated traffic volume data for St. Louis in the State of Missouri, USA using the kriging method, and tested its accuracy by comparing the estimates with actual measurements. In addition, we suggested a new method for enhancing the accuracy of prediction by the kriging method. In the new method, we estimated traffic volume data: first, by applying anisotropy, which is a characteristic of traffic volume data appearing in determining variogram factors; and second, by performing co-kriging analysis using interstate highway, which is in a high spatial correlation with traffic volume data, as a secondary variable. According to the results of the analysis, the analysis applying anisotropy showed higher accuracy than the kriging method, and co-kriging performed on the application of anisotropy produced the most accurate estimates.

• International journal of advanced smart convergence
• /
• v.6 no.2
• /
• pp.59-64
• /
• 2017

There are three sorts of voices of female vocalists: soprano, mezzo-soprano, and contralto according to the transliteration. Among them, the soprano has the highest vocal range. Since the voice is generated through the human vocal tract based on the voice generation model, it is greatly influenced by the vocal tract. The structure of vocal organs differs from person to person, and the formants characteristic of vocalization differ accordingly. The formant characteristic refers to a characteristic in which a specific frequency band appears distinctly due to resonance occurring in each vocal tract in the vocal process. Formant characteristics include personality that occurs in the throat, jaw, lips, and teeth, as well as phonological properties of phonemes. The first formant is the throat, the second formant is the jaw, the third formant and the fourth formant are caused by the resonance phenomenon in the lips and the teeth. Among them, pronunciation is influenced not only by phonological information but also by jaws, lips and teeth. When the mouth is small or the jaw is stiff when pronouncing, pronunciation becomes unclear. Therefore, the higher the accuracy of the pronunciation characteristics, the more clearly the formant characteristics appear in the grammar spectrum. However, many soprano singers can not open their mouths because their jaws, lips, teeth, and facial muscles are rigid to maintain high tones when singing, which makes the pronunciation unclear and thus the formant characteristics become unclear. In this paper, in order to confirm the accuracy of the pronunciation characteristics of soprano singers, the experimental group was selected as the soprano singers A, B, C, D, E of Korea and analyzed the grammar spectrum and conducted the MOS test for pronunciation recognition. As a result, soprano singer B showed a clear recognition from F1 to F5 and MOS test result showed the highest recognition rate with 4.6 points. Soprano singers A, C, and D appear from F1 to F3, but it was difficult to find formants above 2kHz. Finally, the soprano singer E had difficulty in finding the formant as a whole, and MOS test showed the lowest recognition rate at 2.1 points. Therefore, we confirmed that the soprano singer B, which exhibits the most distinct formant characteristics in the grammar spectrum, has the best pronunciation accuracy.

• Journal of Cadastre & Land InformatiX
• /
• v.47 no.2
• /
• pp.79-90
• /
• 2017

Urban environment represent one of the most dynamic regions on earth. As in other countries, forests, green areas, agricultural lands are rapidly changing into residential or industrial areas in South Korea. Monitoring such rapid changes in land use requires rapid data acquisition, and satellite imagery can be an effective method to this demand. In general, SAR(Synthetic Aperture Radar) satellites acquire images with an active system, so the brightness of the image is determined by the surface roughness. Therefore, the water areas appears dark due to low reflection intensity, In the residential area where the artificial structures are distributed, the brightness value is higher than other areas due to the strong reflection intensity. If we use these characteristics of SAR images, settlement areas can be extracted efficiently. In this study, extraction of settlement areas was performed using TerraSAR-X of German high-resolution X-band SAR satellite and KOMPSAT-5 of South Korea, and object-oriented image classification method using the image segmentation technique is applied for extraction. In addition, to improve the accuracy of image segmentation, the speckle divergence was first calculated to adjust the reflection intensity of settlement areas. In order to evaluate the accuracy of the two satellite images, settlement areas are classified by applying a pixel-based K-means image classification method. As a result, in the case of TerraSAR-X, the accuracy of the object-oriented image classification technique was 88.5%, that of the pixel-based image classification was 75.9%, and that of KOMPSAT-5 was 87.3% and 74.4%, respectively.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.6 no.2
• /
• pp.80-91
• /
• 2003

In this research, re-using band ratio data was proposed and examined as a method of raising the accuracy in landcover classification which is using satellite data.In order to determine the band which is used to calculation in the classified item, the six bands except the band 6 were combined with the band in which combination is possible and the landcover classification by MLC of supervised classification was carried out. In the result of landcover classification which is combined with forty nine combination, Two bands which were mostly used by band combination in the accuracy belonged inside the 10th place of a higher rank were selected and also calculated. landcover classification were performed again after the calculation result had been recombinated from the research. In addition, the new landcover classification result was compared and examined with the landcover classification using the old data. From the result of which was compared and examined the new landcover classification data recombinated calculation result with landcover classification using the original data, The classification accuracy of the new landcover classification data recombinated calculation result became low in ground but became improved in the all class. Specially The accuracy to urban area is very improved. therefore, it determined that reusing band ratio data is very useful when we need to analyze landcover classification and land information to urban area after that.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.4
• /
• pp.223-233
• /
• 2018

In this study was classified the cadastral control points and parcel boundary points into 40m, 100m by flight altitude of UAV (Unmanned Aerial Vehicle) which compared the coordinates extracted from the orthophoto with the parcel boundary point coordinates by GNSS (Global Navigation Satellite System) ground survey. As a results of this study, first, in the spatial resolution analysis that the average error of the orthoimage by flight altitude were 0.024m at 40m, and 0.034m at 100m which were higher 40m than 100m for spatial resolution of orthophotos and position accuracy. Second, in order to analyze the accuracy of image recognition by airmark of flight altitude that was divided into three cases of nothing, green, and red of RMSE (Root Mean Square Error) were X=0.039m, Y=0.019m and Z=0.055m, the highest accuracy. Third, the result of the comparison between orthophotos and field survey results that showed the total RMSE error of the cadastral control points were X=0.029m, Y=0.028m, H=0.051m, and the parcel boundary points were X=0.041m, Y=0.030m. In conclusion, based on the results of this study, it is expected that if the average error of flight altitude is limited to less than 0.05m in the legal regulations related to orthophotos for cadastral surveying, it will be an economical and efficient method for cadastral survey as well as spatial information acquisition.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.5 no.1
• /
• pp.27-37
• /
• 2002

The classification accuracy of land cover has been considered as one of the major issues to estimate pollution loads generated from diffuse landuse patterns in a watershed. This research aimed to assess the effects of the acquisition methods and sampling size of training reference data on the classification accuracy of land cover using an imagery acquired by optical sensor(OPS) on JERS-1. Two kinds of data acquisition methods were considered to prepare training data. The first was to assign a certain land cover type to a specific pixel based on the researchers subjective discriminating capacity about current land use and the second was attributed to an aerial photograph incorporated with digital maps with GIS. Three different sizes of samples, 0.3%, 0.5%, and 1.0% of all pixels, were applied to examine the consistency of the classified land cover with the training data of corresponding pixels. Maximum likelihood scheme was applied to classify the land use patterns of JERS-1 imagery. Classification run applying an aerial photograph achieved 18 % higher consistency with the training data than the run applying the researchers subjective discriminating capacity. Regarding the sample size, it was proposed that the size of training area should be selected at least over 1% of all of the pixels in the study area in order to obtain the accuracy with 95% for JERS-1 satellite imagery on a typical small-to-medium-size urbanized area.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.2
• /
• pp.150-159
• /
• 2019

Nowadays, dental implant is one of the widely used treatment options for edentulous patients. Recently, a method of improving the accuracy of implant surgery using an implant surgical guide has been introduced and widely used in order to accurately place the implant in a proper position. Full-guided and half-guided implant surgery can be distinguished according to the level of surgical guide application during the implant surgery. It is true that full-guided implant surgery exhibits higher accuracy, but half- guided implant surgery is often performed in a clinical situation due to the factors such as the circumstances of the operation. A partially edentulous patient who lost teeth due to tooth fracture and periodontal disease was treated using implant and fixed prosthesis. Half-guided implant surgery was performed using an implant surgical guide during implant surgery, the accuracy of implant placement was analyzed.

• KIPS Transactions on Software and Data Engineering
• /
• v.10 no.4
• /
• pp.133-142
• /
• 2021

With the recent advancements of deep learning, companies such as smart home, healthcare, and intelligent transportation systems are utilizing its functionality to provide high-quality services for vehicle detection, emergency situation detection, and controlling energy consumption. To provide reliable services in such sensitive systems, deep learning models are required to have high accuracy. In order to develop a deep learning model for analyzing previously mentioned services, developers should utilize the state of the art deep learning models that have already been verified for higher accuracy. The developers can verify the accuracy of the referenced model by validating the model on the dataset. For this validation, the developer needs structural information to document and apply deep learning models, including metadata such as learning dataset, network architecture, and development environments. In this paper, we propose a description language that represents the network architecture of the deep learning model along with its metadata that are necessary to develop a deep learning model. Through the proposed description language, developers can easily verify the accuracy of the referenced deep learning model. Our experiments demonstrate the application scenario of a deep learning description document that focuses on the license plate recognition for the detection of illegally parked vehicles.