• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1475-1477
• /
• 1998

In this paper, breakdown strength and time to breakdown are experimented under semiconducting layer/needle electrode in XLPE which is used for power cable insulator. Shape and scale parameters of obtained data are estimated using 2-parameters Weibull distribution. Life-time coefficient(n-value) using shape parameters for breakdown strength and time to breakdown tests is estimated. n-value of 1000 hour aged XLPE showed higher value than that of virgin XLPE. Increase of n-value is estimated by the stability due to removal of by-product and residue gas in XLPE by heating.

• 한국환경보건학회지
• /
• 제26권4호
• /
• pp.38-44
• /
• 2000

Compared to other waste, waste tire has much discharge quantity and calorie. When we use waste heat from waste tire, it can be definitely better substitute energy than coal and anthracite in high oil price age. To use as a basic data for providing low cost and highly effective heating system, following conclusion was founded. Annual waste tire production was 19,596 million in 1999, Recycling ratio was almost 55% and more than 8.78 million was stored. Waste tire has lower than 1.5% sulfur contain ratio which is resource of an pollution, So it is a waste fuel which can be combustion based on current exhaust standard value without any extra SOx exclusion materials. Waste tire has 9,256Kcal/kg calorific value and it is higher than waste rubber, waste rubber, waste energy as same as B-C oil. When primary and second air quantity was 1.6, 8.0 Nm$^3$/min, dry gas production time was 270min and total combustion time was 360 min. In the SOx, NOx, HC of air pollution material density were lower than exhaust standard value at the back of cyclone and dusty than exhaust standard value without dust collector.

• 태양에너지
• /
• 제18권3호
• /
• pp.177-183
• /
• 1998

본 논문은 미세캡슐을 함유한 축열장판의 열성능에 관해서 조사하였고 기존 시판되고 있는 장판과 비교를 하였다. 상변화물질로는 Myristic Acid($CH_3(CH_2)_{12}COOH$)를 사용했고 이 물질을 PMMA와 왁스로 3중 코팅을 하였고 $1{\sim}1.5mm$인 캡슐로 제조를 하였다. ANSI/ASHRAE를 토대로 하여 열전달 매체로 공기를 사용한 밀폐형 실험장치를 구성하였으며, 공기유량은 오리피스를 통해서 측정된다. 실험에 사용된 두 개의 서로다른 장판(미세캡슐 함유율 중량비 10% 장판, 0% 장판)의 열성능을 평가하기 위해서 서로다른 공기유량에 대해서 방열시 열전달 특성에 관한 실험을 수행하였다. 실험결과를 보면 방열과정시 미세캡슐 함유율이 10%인 장판의 표면온도는 미세캡슐을 함유하지 않은 장판보다 더 높은 온도를 유지했다. 그리고 장판표면에서의 열전달계수는 미세캡슐을 함유하지 않은 장판과 비교해 볼 때 미세캡슐을 함유한 장판에서 더 높게 나타났다.

• 한국융합학회논문지
• /
• 제7권6호
• /
• pp.13-21
• /
• 2016

본 논문은 현재 진행 중인 대한민국 남부지역에 위치한 대학 내 스마트에너지캠퍼스 마이크로그리드에서 대학 내 빌딩에 설치될 수소전기분해 이용 연료전지 시스템 운용을 위한 선행 연구로써 고분자전해질막 전기분해(PEMWE)과 고분자전해질막 연료전지(PEMFC) 장치에서 동시에 온도변화 효과를 연구하고자 한다. 전반적으로 실험실에서 50W 고분자전해질막 연료전지(PEMFC)을 사용하여 수행하였다. 모니터링 프로세스는 무선 로라 노드와 게이트웨이 네트워크를 구성하여 실행하였다. 그리고 PEMWE와 PEMFC에 대한 수학적 모델링과 운전 알고리즘을 제안하였으며 제안한 모델에서 PEMWE는 낮은 발열 기준에서 효율이 더 높음을, 반면에 PEMFC는 높은 발열기준에서 효율이 더 높음을 을 알 수 있었다. 향후 대학 구내 빌딩에 설치될 실증시스템 성능을 높이기 위해 PEMWE와 PEMFC의 온도와 압력을 모니터링, 통신 및 제어 등 연구개발을 통하여 구현할 예정이다.

• 한국의류산업학회지
• /
• 제15권2호
• /
• pp.231-239
• /
• 2013

This research developed a smart girdle for adult women in their 20's that has an inserted carbon weaving heater to help with relief from coldness and abdominal disease through the thermal insulation effect. A pocket of powernet fabric was attached to the inside of the girdle for the easy insertion and separation of the heating device, while the heating device was fixed to a mesh material by cotton yarn and was wrapped with elastic lining material to prevent the mechanical devices from being exposed. A set of 3 hooks was attached to the center of the back of the heating device in consideration of convenience and mobility. Whereas the switch was inserted into around the right waistband, and the battery into the inner pocket around the waist, to integrate the heating device with the girdle. The satisfaction and usability of the fabricated smart girdle was verified by having research participants wear it to evaluate the appearance change caused by the device, the inconvenience of wearing/unwearing, mobility, and the satisfactory functionality of the device. As a result, the grand mean was evaluated to be high, with appearance (4.19), mobility (4.17), and functionality (4.51) being higher than 4.00; which indicates that the heat generation function of the smart girdle is effective. It may be said that such collection and analysis of data that reflect users' opinions have value and significance in that they can be grafted onto future research on new technology as well as they contribute to taking a step forward in the rapidly increasing research of smart clothing, with the new-type clothing equipped with new function.

• Journal of Applied Biological Chemistry
• /
• 제54권3호
• /
• pp.147-152
• /
• 2011

고구마 분말을 첨가한 뻥튀기 제조 시 팽화시간, 팽화온도, 수분함량과 같은 팽화조건을 달리하여 물리적 및 관능적 품질 특성을 조사하였다. 실험 결과, 색도에서 수분함량은 유의적 차이를 나타내지 않았지만 팽화온도와 팽화시간이 증가함에 따라 $L^*$값이 감소하고, $a^*$값과 $b^*$값이 증가하였다. 비체적은 팽화시간, 팽화온도, 수분함량이 증가할수록 일반 고구마 뻥튀기의 비체적도 증가하였으며, 파괴력은 낮은 수분함량, 높은 팽화온도, 오랜 팽화시간에서 높게 나타났다. 또한 외관, 색, 향, 조직감, 맛에 대한 패널들의 전체적인 기호도를 나타낸 관능평가에서는 수분함량 및 팽화온도가 높고, 오랜 팽화시간 하에 제조된 시험구가 우수하게 평가되었다.

• Journal of Nutrition and Health
• /
• 제29권9호
• /
• pp.1042-1048
• /
• 1996

In order to investigate heating rate of commercial milk products in korean market, lactulose content and availability of calcium and ascorbic acid were measured. The pH range for raw and commercial milk was 6.5-6.75, and protein content was 2.5-3.13%. The acid degree value (。SH)showed between 5.3 and 7.1. There were no differences in pH, protein and acid degree among 3 types of milk. The portion ionic Ca content in UHT-milk(32.4%) and pasteurized milk (27%) increased significantly in comparison with raw milk (4.6%). Pasteurization led to loss of 20% ascorbic acid, and losses of UHT-treatment are approximately twice as high. Significant differences of lactulose content between UHT milk and pasteurized milk were observed. Some of UHT milk products showed very high value of lactulose content like sterilized milk. It is well known that the stress caused by indirect UHT treatment is slightly higher compared with the direct process. The results in this experiment suggested that most of UHT milk in korean market may be treated by indirect UHT method. In oder to keep the adventages of milk component, the heating methods of milk have to be reconsidered.

• 한국환경보건학회지
• /
• 제31권1호
• /
• pp.86-93
• /
• 2005

Because generally large amount of sludges are generated from the process of sewage and wastewater treatment, the management and controlment of those sludge has become a important issue in many researches. In this dissertation, we conducted the research to see the physico-chemical characteristics of sludges generated from various sources. Moisture of sludges were 81.5% in textile industries, 81.4% in frame metal industries, 80.7% in 1st metal industries. Volatile solid were 22.1% in hide · rubber industries, 21.9% in coke · petroleum industries. Fixed solid were 18.5% and 17.7% in the 1st metal industries and frame metal industries. High heating value by wet base were 1,850 kcal/kg in coke · petroleum industries, 1,220 kcal/kg in hide · rubber industries, but sludges from the 1st metal industries and frame metal industries were impossible to incinerate because most of those sludges were inorganic. The leaching test showed that hazardous materials was detected in nearly every kinds of sludges. Some of sludges from hide · rubber industries and frame metal industries exceeded the leaching criteria and so they were classified as specific wastes. And other sludges generated in sewage treatment plants or other industries was below the leaching criteria.

• 한국연소학회지
• /
• 제18권3호
• /
• pp.44-53
• /
• 2013

In this study, the economic evaluation for imported coals was conducted for power plant based on thermo-dynamical performance analysis. The number of coal types considered was 1,755 imported by five power generation companies in Korea during the 2010-2012. The higher heating value (HHV) of the coals ranged 4,000-6,500 kcal/kg, mostly sub-bituminous. The 1D thermo-dynamical performance modeling was performed for a 500 MWe standard power plant using PROATES code. It was founded that the low rank coals had negative effects on the plant efficiency mainly due to the increased heat loss by moisture, hydrogen and flue gas. Based on the performance analysis, the economic performance of the coals was evaluated. The apparent price of low-rank coals tended to be significantly lower than design coal; for example, the unit price of coal with a HHV of 4,000 kcal/kg was 57% of the reference coal having 6,080 kcal/kg. Considering the negative effects leading to a decrease in the thermal performance, heating value compensation, and increased parasite load, the corrected unit cost for the coal with 4,000 kcal/kg was 90.7% of the reference coal. Overall, the cost saving by imported coals was not high as expected.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.779-782
• /
• 1990

Recently batch type cold rolling processes have been replaced by continuous annealing type processes for cold rolled sheets of mild steel and high strength steel in order to obtain higher productivity, labor saving. In the continuous annealing line, it is very important to maintain the target steel strip temperature at the exit side of each furnace. The automation system of continuous annealing line is based on a hierachical composition. This paper shows how to preset the set value of furnace temperature control for the heating section in a continuous annealing line. Saying in other words, this paper presents the development of an adaptive control approach to control the exit strip temperature in the continuous annealing line. There are three parts in this approach; one is a process modelling and another is recursive parameter estimation and the other is a design of temperature controller.