• Journal of the Korea Society of Computer and Information
• /
• v.13 no.7
• /
• pp.117-126
• /
• 2008

Recent advances in medical imaging technologies have enabled the high-resolution data acquisition. Therefore visualization of such large data set on standard graphics hardware became a popular research theme. Among many visualization techniques, we focused on bricking method which divided the entire volume into smaller bricks and rendered them in order. Since it switches bet\W8n bricks on main memory and bricks on GPU memory on the fly, to achieve better performance, the number of these memory swapping conditions has to be minimized. And, because the original bricking algorithm was designed for regular volume data such as CT and MR, when applying the algorithm to ultrasound volume data which is based on the toroidal coordinate space, it revealed some performance degradation. In some areas near bricks' boundaries, an orthogonal viewing ray intersects the single brick twice, and it consequently makes a single brick memory to be uploaded onto GPU twice in a single frame. To avoid this redundancy, we divided the volume into bricks allowing overlapping between the bricks. In this paper, we suggest the formula to determine an appropriate size of these shared area between the bricks. Using our formula, we could minimize the memory bandwidth. and, at the same time, we could achieve better rendering performance.

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.11
• /
• pp.655-662
• /
• 2003

In some volume visualization fields such as medical imaging, anisotropic volume data are more common than isotropic ones. In this paper, we propose an efficient rendering method for anisotropic volume data, which directly computes the intensity of intermediate samples by interpolating the intensity of two corresponding voxels on consecutive slices. Unlike density interpolation method, it does not require a preprocessing step for generating intermediate slices or additional memory for storing them. Additionally, we propose an adaptive intermediate voxel insertion method that avoids overblurring on object surfaces. This may occur when we render high frequency areas using the intensity interpolation method. Using these methods, we can improve the rendering speed without sacrificing image quality.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.19 no.1
• /
• pp.47-56
• /
• 2015

In this paper, we present an implicit method for reconstructing a 3D solid model from two 2D cross section images. The proposed method is based on the Cahn-Hilliard model for the image inpainting. Image inpainting is the process of reconstructing lost parts of images based on information from neighboring areas. We treat the empty region between the two cross sections as inpainting region and use two cross sections as neighboring information. We initialize the empty region by the linear interpolation. We perform numerical experiments demonstrating that our proposed method can generate a smooth 3D solid model from two cross section data.

• Korean Journal of Adult Nursing
• /
• v.25 no.6
• /
• pp.679-689
• /
• 2013

Purpose: This prospective study was designed to investigate the prevalence of urinary incontinence (UI), voided volume, post void residual volume (PVRV), daytime frequency and nocturia in women over 40 years. Methods: The sample comprised of 302 women over 40 years.The study lasted from February 2008 to November 2009. Data about daytime frequency and nocturia were gathered from 48 hour bladder diary. Further, a PVRV was assessed through a bladder ultrasonography. Data were analyzed using the t-test, Mann Whitney test, Kruskal Wallis test and multiple regression. Results: Although the prevalence of UI among the women was as high as 70.5%, the perception rate of UI was as low as 10.8%.Single voided volume of women without or with UI was 223 mL or 198 mL (p<.001), respectively; PVRV, 25.8 mL or 23.6 mL (p=.055); daytime frequency, 5.89 or 6.96 (p<.001); nocturia, 0.99 or 1.23 (p=.040). Age (${\beta}$=0.19, p=.001), single voided volume (${\beta}$=-0.16, p=.006), and nocturia (${\beta}$=0.12, p=.034) were associated with UI. Conclusion: The prevalence of UI was found to be 70.5% among the participants. The assessment of single urinary volume and nocturia through a bladder diary lends support to identifying UI for women over 40 years.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3003-3008
• /
• 2007

Critical nozzle has been frequently employed to measure the flow rate of various gases, but hydrogen gas, especially being at high-pressure condition, was not nearly dealt with the critical nozzle due to treatment danger. According to a few experimental data obtained recently, it was reported that the discharge coefficient of hydrogen gas through the critical nozzle exceeds unity in a specific range of Reynolds number. No detailed explanation on such an unreasonable value was made, but it was vaguely inferred as real gas effects. For the purpose of practical use of high-pressure hydrogen gas, systematic research is required to clarify the critical nozzle flow of high-pressure hydrogen gas. In the present study, a computational fluid dynamics(CFD) method has been applied to predict the critical nozzle flow of high-pressure hydrogen gas. Redlich-Kwong equation of state that take account for the forces and volume of molecules of hydrogen gas were incorporated into the axisymmetric, compressible Navier-Stokes equations. A fully implicit finite volume scheme was used to numerically solve the governing equations. The computational results were validated with some experimental data available. The results show that the coefficient of discharge coefficient is mainly influenced by the compressibility factor and the specific heat ratio, which appear more remarkable as the inlet total pressure of hydrogen gas increases.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.6
• /
• pp.691-697
• /
• 1999

This paper describes the implementation of a high speed image processing board. This image processing board is consist of a image acquisition part and a image processing part. The image acquistion part is digitizing the image input data from CIS and save it to the dual port RAM. By putting on the dual port memory between two parts, during acquistion of image, the image processing part can be effectively processing of large-volume image data. Most of all image preprocessing part are integrated in a large-scaled FPGA. We arwe using ADSP-2181 of the Analog Device Inc., LTD. for a image processing part, and using the available all memory of DSP for the large-volume image data. Especially, using of IDMA exchanges the data with the external microprocessor or the external PC, and can watch the result of image processing and acquired image. Finally, we show that an implemented image processing board used for the simulation of image retreval by the one of the typical application.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.6
• /
• pp.515-520
• /
• 2004

Core-based system-on-a-chip (SoC) designs present a number of test challenges. Two major problems that are becoming increasingly important are long application time during manufacturing test and high volume of test data. Highly efficient compression techniques have been proposed to reduce storage and application time for high volume data by exploiting the repetitive nature of test vectors. This paper proposes a new test data compression technique for SoC testing. In the proposed technique, compression is achieved by partitioning the test vector set and removing repeating segment. This process has $O(n^{-2})$ time complexity for compression with a simple hardware decoding circuitry. It is shown that the efficiency of the proposed compression technique is comparable with sophisticated software compression techniques with the advantage of easy and fast decoding.

• 한국연소학회:학술대회논문집
• /
• 2014.11a
• /
• pp.297-299
• /
• 2014

Petroleum coke has high heating value and low price. Due to the steadily increasing demand for heavy oil processing, the production volume of petroleum coke tends to be expanded. The high availability and low price of petroleum coke have been strongly considered as candidate fuel for power generation facilities. However the high carbon content, high sulfur content and nitrogen content of petroleum fuel are known to produce relatively large quantity of CO2, high NOx and SO2 emission. In this work, a series of numerical simulations have been carried out in order to investigate the effects of swirl flow intensity on combustion furnace, which is most important operating condition. Results show that the temperature distribution was spatially uniform at about 1600K but high temperature region are located quite differently depending on swirl number. In addition, numerical temperature data was compared with experimental temperature data and its temperature difference shows less than 10%. On the other hand, discrepancy between numerical and experimental emission data were slightly large with necessities of improved emission model.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.6_1
• /
• pp.539-547
• /
• 2012

Volume survey for earthwork is conducted periodically at every month at large scaled construction sites for request payment for the construction. Currently, the earthwork volume is calculated on the overlapped drawing for two cross sections which were created by new and previous surveying data observed by GPS and TS. However the survey is required lots of time and expenses as it is a pin-point surveying method thus surveyors intend to get data only for the heavy undulated topographic features chosen by himself to save time and expenses. Consequently, it causes poor results due to low dense measurement as well as it's not matched with the results by another surveyors. As a result, the conflicts related in earthwork volume calculation often arises among the owner, contractors and sub contractors. In this study, we developed a method to get surveying data for fast and accurate volume calculation using 3D Mobile Laser System and conducted an application test. Also we carried out experiments for topographic survey using MLS to judge for the application additionally. The results showed that we could reduce a time for cross section survey from 48 hours to 2 hours and collected high dense data which have 0.2m interval instead of 3m interval compare with existing method. Also we could make a map which has high accuracy within 10cm in horizontal through topographic survey using MLS.

• Nuclear Engineering and Technology
• /
• v.51 no.3
• /
• pp.908-914
• /
• 2019

Fusion power shutdown system (FPSS) is a safety system to stop plasma in case of accidents or incidents. The gas injection system for the FPSS presented in this work is designed to research the flow development in a closed system. As the efficiency of the system is a crucial property, plenty of experiments are executed to get optimum parameters. In this system, the flow is driven by the pressure difference between a gas storage tank and a vacuum vessel with a source pressure. The idea is based on a constant volume system without extra source gases to guarantee rapid response and high throughput. Among them, valves and gas species are studied because their properties could influence the velocity of the fluid field. Then source pressures and volumes are emphasized to investigate the volume flow rate of the injection. The source pressure has a considerable effect on the injected volume. From the data, proper parameters are extracted to achieve the best performance of the FPSS. Finally, experimental results are used as a quantitative benchmark for simulations which can add our understanding of the inner gas flow in the pipeline. In generally, there is a good consistency and the obtained correlations will be applied in further study and design for the FPSS.