• Journal of Information Processing Systems
• /
• v.3 no.2
• /
• pp.54-63
• /
• 2007

The high-speed mobile Internet has recently been expanded, many attractive services are provided. However, these services require some form of security-related technology. This paper outlines Japanese mobile services and exposits some mobile security topics including mobile spam, mobile malware, mobile DRM system, mobile WiMAX security, and mobile key management.

• Proceedings of KOSOMES biannual meeting
• /
• 2017.11a
• /
• pp.261-261
• /
• 2017

• The KSFM Journal of Fluid Machinery
• /
• v.16 no.3
• /
• pp.18-25
• /
• 2013

Recently the requirement of long-term mobile energy source for mobile robot or small-sized unmanned vehicle is highly increased, and the micro turbine generator(MTG) which is known to have high energy and power density is under development. MTG is designed to have air foil bearing and high speed rotor of which operating speed is 400,000rpm. In the development stage of high speed rotor and bearing, stability analysis for the full operational speed range is essential and the dynamic coefficients such as stiffness and damping coefficients of bearing depending on the rotational speed are required for that. Although perturbation method is usually used to identify the dynamic coefficients, it's not easy to give the perturbation to the high speed rotating rotor. In this study, we present the dynamic coefficients measurement system for air foil bearing which consists of electromagnets, gap sensors, high speed motor and controller. This measurement system can exert the sine sweep force to the rotor-bearing, measure the displacement of rotor and get FRF(Frequency response function) of rotor-bearing. The least square estimation method is applied to identify the dynamic coefficients of bearing from the measured frequency response at the different rpm and the identified dynamic coefficients for the wide rotational speed range are presented.

• Journal of Broadcast Engineering
• /
• v.23 no.2
• /
• pp.293-301
• /
• 2018

In ISDB-T, which is Japanese digital terrestrial TV specification based on OFDM technology, 6MHz bandwidth is divided into 13 segments. Twelve segments (full-seg) are used for high definition broadcasting for fixed receivers and one segment (one-seg) for mobile receivers. Though one-seg supports high speed mobility by using QPSK modulation, it is not suitable for large display mobile devices because of its low data rate. Full-seg using 64QAM modulation also suffers from its low mobile performance. In this paper, mobile performance of ISDB-T full-seg receiver is evaluated by applying sub-carrier interference removing scheme, high speed mobile channel estimation scheme and antenna diversity scheme.

• Journal of the Korea Society for Simulation
• /
• v.20 no.4
• /
• pp.91-96
• /
• 2011

As the user's demand for ultra high-speed wireless internet has increased, the standardization, research and development of future mobile communication systems have been done for several years. IMT-Advanced system which is called fourth generation mobile communication should support the data rate of 1 Gbps for nomadic users and 100 Mbps for mobile users. Also, the system should hold call connection at the mobile speed of 350 km/h. Meanwhile, since Doppler spread is linearly proportional to mobile speed, high mobility leads to the increase of interference between subcarriers and the deterioration of detection performance consequently. In this paper, we evaluate and analyze detection probability with respect to equalization methods in time-varying channels under system parameters complying with IMT-Advanced requirements. According to computer simulation conducted by varying mobile speed and code rate, MMSE based equalization can mitigate performance degradation of IMT-Advanced system considerably in time-varying channels.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.1
• /
• pp.96-103
• /
• 2009

This paper presents a L3 mobile terminal platform of the mobile terminal system which is a subsystem of HMm(Hig-speed Mobile Multimedia) system, which layer 3 control protocols such as RC(Radio Control), SC(Session Control), MC(Mobility Control) and application services such as VOD, FTP, VoIP for a multimedia mobile terminal are implemented on. The hardware platform is based on PXA255 and supports various interfaces and multimedia devices, and under the platform, an embedded Linux generated by the self-maden cross-toolchain, L3 control protocols and application programs were installed. The operation of HMm system under the HMm testbed has shown that this platform successfully supported SIP services, web browsing services, streaming services and etc as well as call processing. It could be the reference of the upcoming Fourth-Generation mobile terminal which the multimedia functionality will be enforced.

• ETRI Journal
• /
• v.38 no.6
• /
• pp.1052-1063
• /
• 2016

We propose a millimeter wave (MMW)-based mobile hotspot network (MHN) system for application in high-speed railways that is capable of supporting a peak backhaul link throughput of 1 Gbps per train at 400 km/h. The MHN system can be implemented in subways and high-speed trains to support passengers with smart devices and provide access to the Internet. The proposed system can overcome the inherent high path loss in MMW through system designs and high antenna gains. We present a simulation of the system performance that shows that a fixed beamforming strategy can provide high signal-to-interference-plus-noise-ratio similar to those of an adaptive beamforming strategy, with the exception of 15% of the train path in which the network can use link adaptation with low-order modulation formats or trigger a handover to maintain the connection. We also demonstrate the feasibility of the MHN system using a test bed deployed in Seoul subway line 8. The backhaul link throughput varies instantaneously between 200 Mbps and 500 Mbps depending on the SNR variations while the train is running. During the field trial, the smartphones used could make connections through offloading.

• Journal of the Semiconductor & Display Technology
• /
• v.8 no.4
• /
• pp.53-58
• /
• 2009

A SMT mounter is a kind of equipment that mounts SMD parts quickly on the printed circuit board. By using linear motors, it is controlled with high speed and precision, which is similar to semi-conductor and display process equipment. It is necessarily used in an assembly process of an electronic device. Mobile devices such as a mobile phone and PDA are required to reduce mount areas due to the demands for high performance and small size. Hence, super small sized and complex mobile devices have been developed. To improve the productivity of the corresponding equipment, designs with large sized, high speed, and multidisciplinary functions have been consistently performed. Meanwhile, a design trend of large size and light-weight on SMT mounter causes a low natural frequency of systems and vibration problems at the high speed operation. In this paper, the dynamic characteristics of the SMD mounter system were investigated through a modal test and transmissibility test, and verified by finite element method. Also, various design improvement was performed to avoid the resonance phenomena.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.4
• /
• pp.541-546
• /
• 2010

The gesture 'Flick' is the most fundamental and important part for efficient interactions in the touch screen that are being extensively applied to mobile phones. This study investigated users' satisfaction of the flick operation in representative touch phones, and measured their performances with established three measures: gap between finger and initial cursor, the number of moved lists per 0.2 seconds, and the number of moved lists after ten continuous flicks. The measurement was performed with high speed camera and motion analysis software. The flick movement in mobile phone with high users' satisfaction showed that the gap between finger and cursor positions was less and the speed reached high within 0.6 seconds quickly and then was drastically slow down. Especially, maximal and common time intervals between continuous flicks were measured with an experiment. Based on the evaluation and measurement, several design guidelines for efficient flick performances were suggested.

• Journal of KIISE:Information Networking
• /
• v.33 no.3
• /
• pp.269-276
• /
• 2006

This paper proposes a seamless handover scheme for high-speed trains using dual mobile routers to minimize service disruption time and packet loss during handovers. In the proposed scheme, each of the dual mobile routers is located at each end of the moving network for space diversity. One of the two mobile routers can continuously receive packets from its home agent, while the other is undergoing a handover, but they act as one logical mobile router. Analytical and simulation results showed that the proposed scheme could provide no service disruption or packet losses during handovers.