• 제목/요약/키워드: high-purity

검색결과 1,288건 처리시간 0.033초

목재의 나이테 생성 시기에 따른 DNA 추출 수율 및 PCR 성공률: 소나무(Pinus densiflora) 목재의 사례 (DNA Yield and PCR Success Rate of the Establishment Time of Wood Annual Ring: A Case Study of Korean Red Pine (Pinus densiflora))

  • 김소현;이병주;안지영;이제완;이현미;어수형
    • 한국산림과학회지
    • /
    • 제112권4호
    • /
    • pp.554-560
    • /
    • 2023
  • 불법 목재 유통을 막기 위해 DNA를 활용한 수종 및 원산지 식별이 이루어지고 있지만, 목재의 물리·화학적 특성 때문에 양질의 DNA를 얻기 어렵다. 본 연구에서는 목재 DNA 추출 수율과 polymerase chain reaction (PCR) 성공률에 목재 조직의 나이가 영향을 미치는지 알아보기 위하여, 국내 주요 수종인 소나무 원목에서 DNA를 추출하여, 목재의 나이테 생성 시기와 추출 DNA 농도(ng/μl) 및 순도(A260/A280) 그리고 PCR 성공률(%)의 관계를 확인하였다. 분석 결과, 나이테가 형성층으로부터 멀어질수록, 즉 오래 전에 생성된 목재일수록, 추출한 DNA의 농도와 순도는 유의하게 감소하였다. 증폭 길이가 짧은 trnM-trnV(285 bp) 영역과 rpoC1(298 bp) 영역의 경우 PCR 증폭 성공률이 100 %였으나, rbcL(1.3 kb) 영역의 경우 66.67 %였고 30년보다 오래된 조직에서는 모두 증폭에 실패하였다. 시간이 지남에 따라 목재 세포의 사멸과 함께 양질의 DNA가 파괴되어 DNA 농도, 순도, PCR 성공률이 감소한 것으로 판단된다. 본 연구 결과는 향후 목재를 활용한 수종 동정 등에 유용하게 활용될 것으로 기대된다.

Quality Improvement of Crude Glycerol from Biodiesel Production Using Activated Carbon Derived from Krabok (Irvingia malayana) Seed Shells

  • Wuttichai Roschat;Sarunya Donrussamee;Phatcharanan Smanmit;Samlit Jikjak;Tappagorn Leelatam;Sunti Phewphong;Krittiyanee Namwongsa;Preecha Moonsin;Vinich Promarak
    • 한국재료학회지
    • /
    • 제34권1호
    • /
    • pp.1-11
    • /
    • 2024
  • This research investigated the preparation of activated carbon derived from Krabok (Irvingia malayana) seed shells to improve the quality of crude glycerol obtained during biodiesel production. The activated carbon was prepared using a dry chemical activation method with NaOH, utilizing an innovative biomass incinerator. The results revealed that the resulting KC/AC-two-step exhibited favorable physicochemical adsorption properties, with a high surface area of 758.72 m2/g and an iodine number of 611.10 mg/g. These values meet the criteria of the industrial product standard for activated carbon No. TIS 900-2004, as specified by the Ministry of Industry in Thailand. Additionally, the adsorption efficiency for methylene blue reached an impressive 99.35 %. This developed activated carbon was then used to improve the quality of crude glycerol obtained from biodiesel production. The experimental results showed that the KC/AC-two-step increased the purity of crude glycerol to 73.61 %. In comparison, commercially available activated carbon (C/AC) resulted in a higher crude glycerol purity of 81.19 %, as analyzed by the GC technique. Additionally, the metal content (Zn, Cu, Fe, Pb, Cd, and Na) in purified glycerol using KC/AC-two-step was below the standards for heavy metals permitted in food and cosmeceuticals by the Food and Drug Administration of Thailand and the European Committee for Food Contact Materials and Articles. As a result, it can be inferred that Krabok seed shells have favorable properties for producing activated carbon suitable as an adsorbent to enhance crude glycerol purity. Furthermore, the improved crude glycerol from this research has potential for various industrial applications.

Increased Yield of High-Purity and Active Tetrameric Recombinant Human EC-SOD by Solid Phase Refolding

  • Ryu, Kang;Kim, Young-Hoon;Kim, Young-Hwa;Lee, Joon-Seok;Jeon, Byeong-Wook;Kim, Tae-Yoon
    • Journal of Microbiology and Biotechnology
    • /
    • 제18권10호
    • /
    • pp.1648-1654
    • /
    • 2008
  • Superoxide dismutase (SOD) removes damaging reactive oxygen species from the cellular environment by catalyzing the dismutation of two superoxide radicals to hydrogen peroxide and oxygen. Extracellular superoxide dismutase (EC-SOD) is a tetramer and is present in the extracellular space and to a lesser extent in the extracellular fluids. Increasing therapeutic applications for recombinant human extracellular superoxide dismutase (rEC-SOD) has broadened interest in optimizing methods for its purification, with a native conformation of tetramer. We describe a solid phase refolding procedure that combines immobilized metal affinity chromatography (IMAC) and gel filtration chromatography in the purification of rEC-SOD from Escherichia coli. The purified rEC-SOD tetramer from the $Ni^{2+}$-column chromatography is refolded in Tris buffer. This method yields greater than 90% of the tetramer form. Greater than 99% purity is achieved with further purification over a Superose 12PC 3.2/30 column to obtain the tetramer and specific activities as determined via DCFHDA assay. The improved yield of rEC-SOD in a simple chromatographic purification procedure promises to enhance the development and therapeutic application of this biologically potent molecule.

LED용 precursor 재이용을 위한 회수 및 정제 공정 개발 (Development of Reuse Process Through Recovery and Refinement of Precursor for LED)

  • 양재열;오병성;윤재식
    • 자원리싸이클링
    • /
    • 제23권1호
    • /
    • pp.25-32
    • /
    • 2014
  • 본 연구에서는 metal organic chemical vapor deposition(유기금속화학증기증착, MOCVD) 장치로 부터 LED용 GaN epi 성장 시원료로 사용되는 트리메틸갈륨에 대해서 사용 후 잔량을 회수하고 정제하여 재이용할 수 있는 공정 및 시스템을 개발하고자 한다. 본 공정에서 회수된 트리메틸갈륨에 대해서 화학적, 구조적 특성 평가를 통해서 재이용 가능여부를 검토하였다. 먼저 ICP-MS, ICPAES를 이용하여 순도를 분석한 결과 7N(99.99999%)의 고순도 트리메틸갈륨임을 확인했으며, NMR 분석을 통해서 트리메틸갈륨의 구조적 변화를 확인한 결과, 구조 변화 없이 순수 $(CH_3)_3Ga$(트리메틸갈륨) 구조임을 확인하였다. 또한 회수 트리메틸갈륨에 대한 신뢰성 검토를 위해서 MOCVD 공정을 이용하여 u-GaN를 증착시키고, 결정 특성 평가 및 광학 전기적 특성 평가를 실시하였으며 그 결과, 재이용이 가능함을 알 수 있었다.

추출 크로마토그래피를 이용한 고순도 테르븀의 분리 (Separation of High Purity Terbium Using Extraction Chromatography)

  • 이광필;박명진;박긍식;이흥락;박철수
    • 분석과학
    • /
    • 제12권5호
    • /
    • pp.370-374
    • /
    • 1999
  • 추출 크로마토그래피를 이용하여 고순도 테르븀의 선택적 분리를 시도하였다. 고정상으로 2-ethylhexyl-2-ethylhexyl phosphonic acid(HEH[EHP]) 추출수지(-100~+150 mesh), 컬럼은 ${\Phi}20{\times}530mm$를 사용하고 온도는 $50^{\circ}C$로 유지하고, 흡착 유속은 $0.2mL/cm^2{\cdot}min$, 용출유속은 $1.0mL/cm^2{\cdot}min$, 컬럼의 높이와 직경의 비는 1:15로 하였다. 용리액의 산도, 시료의 부하량 및 시료의 조성을 변화시켜 테르븀의 분리의 최적조건을 설정하였다. 그 결과, 산도는 0.6 N HCl, 부하량은 약 5%, 시료의 조성은 $Gd_2O_3(20%)+Tb_4O_7(60%)+Dy_2O_3(20%)$이었다. 그리고, ICP-AES로 테르븀의 분리수율을 구한 결과 99.99% 이었고 순도는 99.98%이었다.

  • PDF

연료전지 자동차 탑재형 고순도 수소생산장치 (High Purity Hydrogen Generator for Fuel Cell Vehicles)

  • 한재성;이석민
    • 한국수소및신에너지학회논문집
    • /
    • 제12권4호
    • /
    • pp.277-285
    • /
    • 2001
  • 본 논문은 연료전지 자동차용 10kWe급 정제일체형 메탄올개질기에 대한 연구결과이다. 이 개질기에서는 메탄올이 수증기와 반응하켜 수소를 포함한 혼합가스로 개질되고, 그 혼합가스는 다시 Palladium 합금막을 통하여 순수한 수소로 분리된다. 정제되고 남은 폐 가스중 가연성분들은 wire-mesh 형태의 연소촉매상에서 연소되어 개질반응에 필요한 열을 직접 공급함으로써 높은 메탄올 전환율, 고품질의 수소생산, 그리고 높은 시스템 열효율을 가능하게 한다. 동시에 이러한 개질, 분리 및 연소반응이 하나의 반응기에서 일어나 전체 시스템이 소형화될 수 있으며 운전이 용이한 장점도 있다. 본 연구팀에서 개발한 10kWe급 시스템은 운전연구를 통하여 수소생산량은 $8.2Nm^3/hr$ (10kWe급), 수소순도 99.999% 이상, CO 농도 5 ppm 미만, 총합열효율 81%, 초기기동 소요시간 20분, 부하변동웅답 1 분 이내를 달성했으며, 장처의 크기와 무게는 각각 16 L, 25 kg 이다.

  • PDF

TEOS의 부분가수분해에 의한 실리카 졸의 합성과 유리섬유 제조 (Preparation of Silica Sol by Partial Hydrolysis of TEOS and High Purity Silica Glass Fiber)

  • 양현수;권오현;이재도;노재성;김영호
    • 공업화학
    • /
    • 제7권5호
    • /
    • pp.823-831
    • /
    • 1996
  • 본 연구는 [$H_2O$]/[TEOS]=1.7에서 산촉매를 첨가한 부분가수분해를 행하여 졸을 합성하였다. 최적의 방사성을 갖는 졸을 결정하기 위하여 부분가수분해에 의하여 합성된 졸을 trimethylsilylation하여 안정화시킨 후에 반응시간에 따르는 분자량과 점도의 변화를 관찰하였다. 최적조건하에서 제조된 졸용액에서 용매를 제거한 후 겔섬유를 제조하였고 이를 $1,000^{\circ}C$에서 열처리하여 실리카섬유를 제조하였다. 제조된 섬유는 단면적이 원형이며 인장강도는 $83{\pm}20kg/mm^2$이었고, 순도는 약 99.997%이었다.

  • PDF

Archicitrus와 Metacitrus로부터 Mitochondrial DNA의 분리 및 특성 (Isolation and Characterization of Mitochondrial DNA from Arehicityars and Metacitrus)

  • 이숙영;박민희
    • 한국식품영양학회지
    • /
    • 제8권4호
    • /
    • pp.307-317
    • /
    • 1995
  • The purity of mtDNAs isolated from Archicitrus and Metacitrus leaves was higher in percoll density gradient centrifugation than differential and sucrose density gradient centrifugation. The most clear mtDNAs were obtained from mitochondria included in the Interface band of between 21% and 45% under isomotic, low viscosity conditions in the three step discontinuous percoll density gradient centrifugation. DNase treatment to the crude mitochondrlal suspension still more increased purity of mtDNA by the effective removal of the nuclear and chloroplast DNA and mtDNAs were appeared as a single band at middle position of tube by EtBr /cscl density gradient centrifugation. Agarose gel electrophoresis of mtDNAs resolved a single, broad band containing high molecular weight DNAs In all preparation. Yield of mtDNAs was about 110 and 2 ug Per 2009 in mature and immature leaves respectively. The mtDNA fragment patterns showed by EcoR I treatment were indistinguishable with respect to nom bet and position of bands in Archicitrus and Metacitrus. In the pattern of Hind E restriction, the Metacitrus displayed the unique band between 5.0 and 4.0kb, in addition to four fragments about 5.0, 2.4, 2.15, and 2.0kb, respectively, different from Archicitrus. Also the pattern of total mtDNAs fragment by the treatment of Pst I showed that the distinguishable fragment pat tern was not appeared in Archicitrus(C. iyo Tanaka), but about 6.0, 5.5, 5.0 and 2.Bkb fragments were appeared only in Metacitrus(C. junos Sieb). Therefore it was indicated that two species in intra-subgenus were identical each other, whereas considerable difference was revealed for inter-subgenus.

  • PDF

Crude N2O로부터 정제된 N2O 분리공정에 관한 연구 (A Study on the N2O Separation Process from Crude N2O)

  • 조정호;이택홍;박종기
    • Korean Chemical Engineering Research
    • /
    • 제43권4호
    • /
    • pp.467-473
    • /
    • 2005
  • 액상의 아산화질소($N_2O$) 혼합물은 주요 불순물로써 공기, 일산화탄소, 수분, 이산화탄소와 NOx 성분을 포함하고 있다. 저온에서 고체화하여 고 순도의 $N_2O$를 얻어내는 것은 위험하다고 알려져 있다. 본 연구에서는 연속식 증류공정에 기초하여 고 순도의 $N_2O$ 제품을 얻어내는 새로운 방법을 소개하였다. 99.999% 이상의 고 순도의 $N_2O$ 제품을 얻어낼 수 있는 연속식 증류공정을 모델화하기 위하여 intalox wire guaze 타입의 SCH-80S의 충진탑을 사용하였다. Peng-Robinson 상태방정식을 사용하여 연속식 증류탑과 냉동 사이클을 모사하였다. 본 연구에서 수행한 전산모사 결과는 상용성 화학공정모사기인 Aspen Plus로 모사한 결과와 매우 잘 일치함을 알 수 있었다.

Quartz에서 cristobalite로의 전이에 미치는 미량성분의 영향 (Effects of impurities on transformation of quartz to cristobalite)

  • Jin Kim;Jeong-Hoon
    • 한국결정성장학회지
    • /
    • 제4권3호
    • /
    • pp.315-324
    • /
    • 1994
  • 고순도 규사 원료를 열처리하는 경우, 불순물로 포함되어 있는 미량성분이 quartz의 전이과정에 미치는 영향 및 전이 경로에 대하여 조사하였다. 미량성분의 영향을 조사한 결과, 규사 중의 미량성분 함량이 많아지면 cristobalite 생성량은 많아지며, quartz의 소멸온도 및 cristobalite의 생성온도는 낮아졌다. quartz의 전이경로를 조사한 결과 quartz $\rightarrow$ 천이비정질상 $\rightarrow$ melt (T) 및 quartz $\rightarrow$ 천이비정질상 $\rightarrow$ cristobalite $\rightarrow$ melt (C)의 경로가 항상 공존하며, 미량성분이 적은 경우는 T 경로가 우세하지만, 미량성분이 많은 경우는 C 경로가 우세한 것으로 규명되었다. 또한 XRD를 이용한 결정질 함량의 분석 결과로 부터 계산한 밀도와 pycnometer로 측정한 밀도를 비교한 결과 서로 일치하였다. 규사를 용융하여 석영유리를 제조하는 경우,특정온도에서 규사의 팽창 정도를 유추할 수 있을 것이다.

  • PDF