• 한국광물학회지
• /
• 제25권2호
• /
• pp.77-84
• /
• 2012

$TiO_2$의 동질이상체 중 하나인 아나타제는 고압 하에서 결정의 크기와 모양에 따라 다른 상변이 경로를 보이는 것으로 알려져 있다. 본 실험에 이용된 아나타제 분말시료는 15~25 nm 정도 크기의 입자로 구성되어 있으며, 고압라만분광분석 결과와 고압 X-선회절실험결과 분석을 종합하면 20 GPa 이상의 압력에서 비정질로 상변이하는 것으로 관찰되었다. 상온에서 압력의 영향으로 상변이한 비정질 구조는 압력을 제거하여도 출발 결정구조로 회귀하지 않는 것으로 밝혀졌다. 이 결과는 베델레이트로 상변이하는 이전의 결과와 상치되며, 출발시료 구성입자의 분급상태가 입자의 불안정성에 영향을 끼쳐 최종적으로 비정질화에 기여한 것으로 판단된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1098-1101
• /
• 1995

NbTi thin films were prepared on Si wafer and Cu substrate by rf magnetron sputtering in the range of sputtering pressure $3{\times}10^{-2}$torr to $3{\times}10^{-4}$torr at room temperature. The influence of sputtering pressure and substrate type on crystallographic orientation and morphology of NbTi thin films was investigated by using X-ray diffraction(XRD) and scanning electron microscopy(SEM), respectively. And the effect of crystallographic orientation and morphology of NbTi film on electromagnetic behaviors was estimated by measuring critical current in various applied magnetic field. The film morphology changed from porous structure consisting of tapered crystallites to densely deposited film decreasing with sputtering pressure. The change of crystallographic orientation with the sputtering pressure and rf power was calculated from the texture coefficient of(002) plane based on XRD patterns. It was found that a change of texture coefficient of(002) plane increased with decreasing sputtering pressure. From observation of critical current in various applied magnetic field, we have identified that the change of critical current abruptly decrease applying with magnetic field and NbTi film produced at high sputtering pressure does not exhibit superconductivity but at low sputtering pressure shows superconductivity.

• 소성∙가공
• /
• 제33권3호
• /
• pp.193-199
• /
• 2024

The friction welding characteristics of stainless steels, mainly used in energy and chemical plant industries due to its excellent corrosion resistance and high strength, was evaluated in this study. Friction welding was introduced and conducted at a rotation speed of 2,000 RPM, friction pressure of 30 MPa, burn-off length of 5 mm and upset pressure of 110 ~ 200 MPa on rod typed specimens. The grain boundary characteristics distributions such a grain size, shape, misorientation angle and kernel average misorientation of the welds were clarified by electron backscattering diffraction method. The application of friction welding on SUS304 alloy resulted in a significant refinement of the grain size in the weld zone (5.11 mm) compared to that of the base material (48.09 mm). The mechanical properties of the welds, on the other hand, appeared to be relatively low or similar to those of the base material, which were mainly caused by dislocation density in the initial material and grain refinement in the welds.

• Korean Chemical Engineering Research
• /
• 제46권1호
• /
• pp.189-193
• /
• 2008

본 연구는 zinc aluminate 촉매를 사용한 고압연속식 고정층 반응시스템에서의 대두유와 메탄올의 transesterification에 관한 것이다. 바이오디젤 제조를 위한 고압 연속식 고정층 촉매 반응에서 반응 조건이 메틸에스터 생성에 미치는 영향이 주로 조사되었다. 촉매가 없는 경우, 거의 모든 반응 조건에서 메틸에스터의 수율이 4.5% 이하로 매우 낮았지만, $300^{\circ}C$, 1,200 psi 조건에서는 19%의 메틸에스터 수율을 보여 주었다. 이는 반응 조건이 메탄올의 초임계점에 근접하였기 때문으로 보인다. 촉매 반응에서는 무촉매 반응과 비교하여 비교적 낮은 온도와 압력에서도 높은 메틸에스터 수율을 보여주었다. 또한 수율에 미치는 반응 조건의 영향을 살펴본 결과, 반응온도, 압력, 반응물에서 메탄올 몰비가 높을수록 높은 메틸에스터 수율을 보여주었다. 반응 변수 중에서도 반응온도가 메틸에스터 수율에 가장 큰 영향을 미치는 것으로 확인되었다.

• 한국재료학회지
• /
• 제28권3호
• /
• pp.159-165
• /
• 2018

In order to increase the efficiency of the sputtering method widely used in thin film fabrication, a dc sputtering apparatus which supplies both high frequency and magnetic field from the outside was fabricated, and cobalt thin film was fabricated using this apparatus. The apparatus can independently control the applied voltage, the target-substrate distance, and the target current, which are important parameters in the sputtering method, so that a stable glow discharge is obtained even at a low gas pressure of $10^{-3}$ Torr. The fabrication conditions using the sputtering method were mainly performed in $Ar+O_2$ mixed gas containing about 0.6 % oxygen gas under various Ar gas pressures of 1 to 30 mTorr. The microstructure of Co thin films deposited using this apparatus was examined by electron diffraction pattern and X-ray techniques. The magnetic properties were investigated by measuring the magnetization curves. The microstructure and magnetic properties of Co thin films depend on the discharge gas pressure. The thin film fabricated at high gas pressure showed a columnar structure containing a large amount of the third phase in the boundary region and the thin film formed at low gas pressure showed little or no columnar structure. The coercivity in the plane was slightly larger than that in the latter case.

• 한국가시화정보학회지
• /
• 제9권2호
• /
• pp.27-33
• /
• 2011

Supersonic liquid jet discharged from a nozzle has been investigated by using a ballistic range which is composed of high-pressure tube, pump tube, launch tube and liquid storage nozzle. High-speed Schlieren optical method was used to visualize the supersonic liquid jet flow field containing shock wave system, and spray droplet diameter was measured by the laser diffraction method. Experiment was performed with various types of nozzle to investigate the major characteristics of the supersonic liquid jet operating at the range of total pressure of 0.8 from 2.14 GPa. The results obtained shows that shock wave considerably affects the detailed atomization process of the liquid jet and as the nozzle diameter decreases, the shock wave angle and the averaged SMD of spray droplet tends to decrease.

• 센서학회지
• /
• 제20권1호
• /
• pp.30-34
• /
• 2011

Single crystal of KCl doped with $Eu^{2+}$ ions was grown by the Czochralski method in the high pressure Ar gas(purity 99.999 %) atmosphere with chamber pressure from which the crystal with high quality was obtained. As grown $KCl:Eu^{2+}$ crystal was checked by X-ray diffraction. Luminescence properties of KCl:Eu are investigated by laser-excitation spectroscopy under 355 nm excitation at 14 and 295 K. The broad emission band due to the $Eu^{2+}$ 5d $\rightarrow$ 4f transition is peaked at 417 nm with full width at half maximum of about 20 and 30 nm.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제5C권5호
• /
• pp.217-220
• /
• 2005

We have fabricated a superconducting YBCO system according to the pyrolysis method and low pressure apparatus. In our experiment, the X-ray diffraction pattern of the non doped YBaCuO layer indicated that the superconductor contained only 90K phase crystal. The critical temperature and critical current density for a thick layer at $650^{\circ}C$ were Tc=90 K and $Jc=6{\times}10^{4}A/cm^2$ at 90K. In low pressure apparatus, the 90 K phase YBaCuO was grown at a lower temperature compared with the normal system. Tc and Jc at $650^{\circ}C$ were Tc = 90 K and $Jc=6{\times}10^{4}A/cm^2$ at 90K.

• 한국분말재료학회지
• /
• 제19권3호
• /
• pp.204-209
• /
• 2012

In this work, powder metallurgy and severe plastic deformation by high-pressure torsion (HPT) approaches were combined to achieve both full density and grain refinement at the same time. Pure Cu powders were mixed with 5 and 10 vol% diamonds and consolidated into disc-shaped samples at room temperature by HPT at 1.25 GPa and 1 turn, resulting in ultrafine grained metallic matrices embedded with diamonds. Neither heating nor additional sintering was required with the HPT process so that in situ consolidation was successfully achieved at ambient temperature. Significantly refined grain structures of Cu metallic matrices with increasing diamond volume fractions were observed by electron backscatter diffraction (EBSD), which enhanced the microhardness of the Cu-diamond composites.

• 한국광물학회지
• /
• 제31권4호
• /
• pp.277-285
• /
• 2018

상온에서 남동석($Cu_3(CO_3)_2(OH)_2$)에 대한 고압 거동 연구를 하였다. 대칭형 다이아몬드 앤빌기기를 이용하여 21.52 GPa까지 압력을 증가시키면서 각분산 X-선 회절법과 방사광을 이용하여 고압회절 데이터를 얻었으며, 시료에 가해준 압력은 루비 형광파의 파장 변화를 측정하여 결정하였다. 본 실험에서 시행한 압력의 범위 내에서 상변이는 관찰되지 않았으며, 정압상태에서 체적탄성률($K_0$)은 ${K_0}^{\prime}$이 4일 때, 54.4 GPa로 계산되었다. 상온상태에서 얻은 남동석의 체적탄성률에 대한 신뢰도를 정규화압력 및 정규화응력변형 분석을 통해 검증하였다.