• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.516-516
• /
• 2022

Agricultural reservoirs are critical water resources structures to ensure continuous water supplies for rice cultivation in Korea. Climate change has increased the risk of reservoir failure by exacerbating discrepancies in upstream runoff generation, downstream irrigation water demands, and evaporation losses. In this study, the variations in water balance components of 400 major reservoirs during 1973-2017 were examined to identify the reservoirs with reliable storage capacities and resilience. A conceptual lumped hydrological model was used to transform the incident rainfall into the inflows entering the reservoirs and the paddy water balance model was used to estimate the irrigation water demand. Historical climate data analysis showed a sharp warming gradient during the last 45 years that was particularly evident in the central and southern regions of the country, which were also the main agricultural areas with high reservoir density. We noted a country-wide progressive increase in average annual cumulative rainfall, but the forcing mechanism of the rainfall increment and its spatial-temporal trends were not fully understood. Climate warming resulted in a significant increase in irrigation water demand, while heavy rains increased runoff generation in the reservoir watersheds. Most reservoirs had reliable storage capacities to meet the demands of a 10-year return frequency drought but the resilience of reservoirs gradually declined over time. This suggests that the recovery time of reservoirs from the failure state had increased which also signifies that the duration of the dry season has been prolonged while the wet season has become shorter and/or more intense. The watershed-irrigated area ratio (W-I_ratio) was critical and the results showed that a slight disruption in reservoir water balance under the influence of future climate change would seriously compromise the performance of reservoirs with W-I_ratio< 5.

• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.5
• /
• pp.490-498
• /
• 2010

HCFC-22 (chlorodifluoromethane, $CHClF_2$), one of the major components in various refrigeration, is emitted mostly from developing countries, as its consumption is not limited until 2013 by the Montreal Protocol. In addition, HFC-23 (trifluoromethane, $CHF_3$), a by-product in the manufacture of HCFC-22, is also a powerful greenhouse gas. Here, we discuss the regional emission characteristics of these compounds based on high-frequency in-situ measurements using the "Medusa" GC-MS system. HCFC-22 and HFC-23 baseline concentrations measured at Gosan (Jeju Island, Korea) from November 2007 to December 2008 increased by 1.8 ppt/yr and 0.6 ppt/yr, respectively. Pollution events of these compounds were observed, very frequently (e.g., ~2~3 times) at Gosan than baseline levels. All the measurement data were divided into four groups by simultaneously considering the ratio (HFC-23/HCFC-22) and concentration (HCFC-22) at Trinidad Head (TH, California, USA). The residence time of trajectories were then analyzed in each of the four groups. The results exhibited the existence of a strong correlation with air mass origin for each group: 1) Air masses originating from Siberia in the north and from the Pacific in the south had ratios of 0.08~0.12 and concentrations of 196.9~254.3 ppt which is highly comparable to background air at TH. 2) Air masses passing over the Southern China exhibited similar ratios but higher HCFC-22 concentrations. 3) Air masses passing over the Northern China had ratios of 0.12~0.21. 4) Air masses passing over Korea and/or Japan had ratios of 0.01~0.08. Our results suggest that the HFC-23/HCFC-22 ratio can be used as a good indicator for the assessment of the pollution with Chinese origin. We also confirmed differences in air masses traveling over Northern and Southern China, most likely due to differences in air mass travelling speed over these regions before arriving at Gosan. This signature may be treated as one of the critical components in identifying the emission sources from different parts of China.

• Journal of the Korea Convergence Society
• /
• v.11 no.11
• /
• pp.123-134
• /
• 2020

With the recent development of 3D printers, there is a growing need to make them similar to real products. As a result, FDM full-color 3D printers have been developed and actively distributed, but GUI design has fallen short of that, causing confusion among users. Accordingly, this study conducted a literature survey, and through a case study, the current status of FDM full-color 3D printers was identified and the components of GUI design were analyzed based on prior research. The draft checklist was drawn up according to the components of the derived GUI design, and 24 items were deleted through the three Delphi surveys and the validity of the remaining 26 items was verified. As a result, the layout should consist of intuitive screen configuration and menus with high frequency of use, and the text should be intuitive and clearly communicated. In addition, the icon should be placed in a visible position and used in real life to image it. Finally, we could see that the color should be used to give feedback to the user using the highlight color and not overlap the output.

• International Journal of Aeronautical and Space Sciences
• /
• v.8 no.1
• /
• pp.10-20
• /
• 2007

For spacecraft attitude control, reaction wheel (RW) steering laws with more than three wheels for three-axis attitude control can be derived by using a control allocation (CA) approach.1-2 The CA technique deals with a problem of distributing a given control demand to available sets of actuators.3-4 There are many references for CA with applications to aerospace systems. For spacecraft, the control torque command for three body-fixed reference frames can be constructed by a combination of multiple wheels, usually four-wheel pyramid sets. Multi-wheel configurations can be exploited to satisfy a body-axis control torque requirement while satisfying objectives such as minimum control energy.1-2 In general, the reaction wheel steering laws determine required torque command for each wheel in the form of matrix pseudo-inverse. In general, the attitude control command is generated in the form of a feedback control. The spacecraft body angular rate measured by gyros is used to estimate angular displacement also.⁵ Combination of the body angular rate and attitude parameters such as quaternion and MRPs(Modified Rodrigues Parameters) is typically used in synthesizing the control command which should be produced by RWs.¹ The attitude sensor signals are usually corrupted by noise; gyros tend to contain errors such as drift and random noise. The attitude determination system can estimate such errors, and provide best true signals for feedback control.⁶ Even if the attitude determination system, for instance, sophisticated algorithm such as the EKF(Extended Kalman Filter) algorithm⁶, can eliminate the errors efficiently, it is quite probable that the control command still contains noise sources. The noise and/or other high frequency components in the control command would cause the wheel speed to change in an undesirable manner. The closed-loop system, governed by the feedback control law, is also directly affected by the noise due to imperfect sensor characteristics. The noise components in the sensor signal should be mitigated so that the control command is isolated from the noise effect. This can be done by adding a filter to the sensor output or preventing rapid change in the control command. Dynamic control allocation(DCA), recently studied by Härkegård, is to distribute the control command in the sense of dynamics⁴: the allocation is made over a certain time interval, not a fixed time instant. The dynamic behavior of the control command is taken into account in the course of distributing the control command. Not only the control command requirement, but also variation of the control command over a sampling interval is included in the performance criterion to be optimized. The result is a control command in the form of a finite difference equation over the given time interval.⁴ It results in a filter dynamics by taking the previous control command into account for the synthesis of current control command. Stability of the proposed dynamic control allocation (CA) approach was proved to ensure the control command is bounded at the steady-state. In this study, we extended the results presented in Ref. 4 by adding a two-step dynamic CA term in deriving the control allocation law. Also, the strict equality constraint, between the virtual and actual control inputs, is relaxed in order to construct control command with a smooth profile. The proposed DCA technique is applied to a spacecraft attitude control problem. The sensor noise and/or irregular signals, which are existent in most of spacecraft attitude sensors, can be handled effectively by the proposed approach.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.9
• /
• pp.987-994
• /
• 2010

In this paper, a simple and effective active load-pull method is proposed, and the method to improve the efficiency of X-band power amplifier using harmonic control circuit is presented. The proposed active load-pull system mainly consists of directional coupler, phase shifter, short circuit, and power amplifier, and allows a user to access reflection coefficients near the edge of the Smith chart($\Gamma$=1) easily. The device used in this paper is Mitsubishi's GaAs FET MGF1801, and the operating frequency of the power amplifier is 9 GHz, The amplifier had output power of 21.65 dBm and drain efficiency of 24.9 % at class-A, and had output power of 21.46 dBm and drain efficiency of 53.3 % at class-AB. Harmonic control circuit is designed only second and third harmonic components because of the bandwidth limitation of the microwave components. The drain efficiency is improved as much as 6.4 % compared with class-AB power amplifier.

• Economic and Environmental Geology
• /
• v.49 no.4
• /
• pp.269-280
• /
• 2016

I presented three vector crustal magnetic anomaly components and six gradients by using spherical Slepian functions over the cap area of $20^{\circ}$ of radius centered on the South Pole. The Swarm mission, launched by European Space Agency(ESA) in November of 2013, was planned to put three satellites into the low-Earth orbits, two in parallel in East-West direction and one in cross-over of the higher altitude. This orbit configuration will make the gradient measurements possible in North-South direction, vertical direction, as well as E-W direction. The gravity satellites, such as GRACE and GOCE, have already implemented their gradient measurements for recovering the accurate gravity of the Earth and its temporal variation due to mass changes on the subsurface. However, the magnetic gradients have little been applied since Swarm launched. A localized magnetic modeling method is useful in taking an account for a region where data availability was limited or of interest was special. In particular, computation to get the localized solutions is much more efficient and it has an advantage of presenting high frequency anomaly features with numbers of solutions fewer than the global ones. Besides, these localized basis functions that were done by a linear transformation of the spherical harmonic functions, are orthogonal so that they can be used for power spectrum analysis by transforming the global spherical harmonic coefficients. I anticipate in scientific and technical progress in the localized modeling with the gradient measurements from Swarm and here will do discussion on the results of the localized solution to represent the three vector and six gradient anomalies over the Antarctic area from the synthetic data derived from a global solution of the spherical harmonics for the crustal magnetic anomalies of Swarm measurements.

• Economic and Environmental Geology
• /
• v.35 no.3
• /
• pp.273-284
• /
• 2002

The Gravity-Geologic Method (GGM) was implemented for bathymetric determinations in the Drake Passage, Antarctica, using global marine Free-air Gravity Anomalies (FAGA) data sets by Sandwell and Smith (1997) and local echo sounding measurements. Of the 6548 bathymetric sounding measurements, two thirds of these points were used as control depths, while the remaining values were used as checkpoints. A density contrast of 9.0 gm/㎤ was selected based on the checkpoints predictions with changes in the density contrast assumed between the seawater and ocean bottom topographic mass. Control depths from the echo soundings were used to determine regional gravity components that were removed from FAGA to estimate the gravity effects of the bathymetry. These gravity effects were converted to bathymetry by inversion. In particular, a selective merging technique was developed to effectively combine the echo sounding depths with the GGM bathymetiy to enhance high frequency components along the shipborne sounding tracklines. For the rugged bathymetry of the research area, the GGM bathymetry shows correlation coefficients (CC) of 0.91, 0.92, and 0.85 with local shipborne sounding by KORDI, GEODAS, and a global ETOPO5 model, respectively. The enhanced GGM by selective merging shows imploved CCs of 0.948 and 0.954 with GEODAS and Smith & Sandwell (1997)'s predictions with RMS differences of 449.8 and 441.3 meters. The global marine FAGA data sets and other bathymetric models ensure that the GGM can be used in conjunction with shipborne bathymetry from echo sounding to extend the coverage into the unmapped regions, which should generate better results than simply gridding the sparse data or relying upon lower resolution global data sets such as ETOPO5.

• Journal of Life Science
• /
• v.17 no.12
• /
• pp.1744-1753
• /
• 2007

The purpose of this study was to provide obese middle school girls with walking and behavior modification program(WBMP) by investigating effects of the exercise on their body composition(BC), physical fitness(PF) and metabolic syndrome(MS). Analysis result of the difference between before and after the exercise(paired and independent t-test) was acquired by measuring BC, PF and MS for 12 weeks(60min/day, three a week). 24 Volunteers were 14 years over ${\geq}223.64kg/m^2$ and 15 years over ${\geq}24.00kg/m^2$. In the body composition, waist circumference(WC), body fat mass(BFM), %fat, arm muscle circumference(AMC), total body water(TBW), physical score(PS) were significant difference between the exercise group(EG) and the control group(CG), also including all factors in PF. The components of metabolic syndrome were significant difference between EG and CG, but HDL-C, systolic & diastolic blood pressure were no difference. The metabolic syndrome factors by separate of waist girth were no difference between EG and CG, but BMI, diastolic blood pressure were significant difference. The prevalence of metabolic syndrome was 4 of 24(16.7%) before intervention, but it dropped from 2 to 1 after intervention in WBMP. The components of metabolic syndrome was distributed a big WC>low HDL-C>high TG>hypertension. The changes of AMC, We, PS, BW, 50m run and BFM effect the factors on BMI(35%), WHR(waist-hip ratio, 69%), HDL-C(42%), fasting blood glucose(65%), HOMA-IR index(34%) and systolic blood pressure(39%) respectively. There were significantly increased in breakfast frequency, walking steps, and meal eating period, but decreased in snacks and eating out in exercise group.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.4
• /
• pp.284-293
• /
• 2020

Rice consumption in Korea has been decreasing as the eating habits of the Korean people have diversified with rapid economic growth. Recently, floury endosperm rice cultivars were developed to boost rice consumption and replace wheat flour consumption with rice flour, which is vulnerable to viviparity under wet weather during the grain-filling stage because of its loosely packed starch granule structures. To overcome this limitation, it is necessary to find a suitable rice transplanting date to produce high-quality rice flour by altering the heading ecology type and changing the cultivation time by region. We examined four floury endosperm rice cultivars (FERC) in the Cheongju (central plain area) and Boeun (mid-mountainous area) regions of Korea from 2017 to 2019. Of the FERCs, the mid-late maturing types (MMT) Seolgaeng (SG), Hangaru (HGR), and Shingil (SGL) exhibited high yield and yield components after transplanting May 30 in both regions; the early maturing type (EMT) Garumi 2 (GRM2) also exhibited high yield after transplanting June 20 in Cheongju. In addition, MMTs showed the same tendency as the characteristics shown in Cheongju when grown in the Boeun region, and EMT displayed high yield and yield components after transplanting June 10. The FERCs could easily present pre-harvest sprouting in the rainy season during the grain-filling stage after 20 days post-heading because the mean temperature and frequency of more three-day rainfalls have increased over the last 5 years from the previous annual averages. Viviparity of HGR and GRM2 decreased as the transplanting date was delayed, with decreases of 2.3%-4.6% in HGR and 11.9%-23.1% in GRM2 according to the region. SGL was generally resistant to viviparity because of the Tongil type. To minimize pre-harvest sprouting and produce high yield of rice flour in the Chungbuk province, the most suitable transplanting time was the end of May in MMT and the middle and end of June in EMT.

• Sleep Medicine and Psychophysiology
• /
• v.17 no.1
• /
• pp.21-27
• /
• 2010

Objectives: It is well established that primary insomnia affects the activity of autonomic nervous system. We tried to know how the activity of autonomic nervous system during night sleep changes by analyzing correlation between heart rate variability (HRV) index and the variables related with sleep structure in primary insomnia. Methods: Thirty three subjects (mean age: $36.2{\pm}14.2$ years, male:female=15:18) who were diagnosed with primary insomnia were selected for the study. Nocturnal polysomnography (NPSG) was carried out on each subject and correlation was analyzed between high frequency/low frequency ratio (LF/HF ratio), one of HRV indices and the variables related with sleep structure which were calculated from NPSG. Results: When age and sex were controlled, LF/HF ratio showed negative correlations with slow wave sleep and stage 2 sleep, respectively ($r_p$=-0.43, p=0.01; $r_p$=-0.37, p=0.04). On the other hands LF/HF ratio showed a positive correlation with arousal index ($r_p$=0.65, p<0.001). The activity of autonomic nervous system responded differentially depending on the change of sleep structure in primary insomnia. Especially the increase of arousal index and the decrease of slow wave sleep and stage 2 sleep which are the components of non-REM sleep provoked hyperactivity of sympathetic nervous system. Conclusion: This study suggests that the typical change of sleep structure in primary insomnia can negatively impact on cardiovascular system.