• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.759-764
• /
• 2000

The accurate prediction of aeroacoustic analysis is necessary for designers to control and reduce airflow-induced sound pressure levels in high speed rotating DVD drives. This paper focuses on the numerical prediction of airflow-induced sound in DVD drives. Computational fluid dynamics(CFD) is first conducted to evaluate flow field characteristics due to the high-speed disk rotation, and to support the acoustic analysis. The acoustic analogy based on Ffowcs Williams-Hawkings(FW-H) equation is adopted to predict aeroacoustic noise patterns. The integral solution for quadrupole volume source is included to identify the turbulence noise generated inside the DVD tray. The strength of sound pressure level with respect to rotating speed is discussed to meet upfront demand on the high fidelity product development. The present study also focuses on the noise directivity and examines how much the sound noise is sensitive to change in rotating speed. Near-field noise is strongly affected by the flow field characteristic, which is caused by the complex shape of the tray. For a mid-field, the quadrupole noise play as a counterpart of thickness noise or loading noise, so it generates different sound noise patterns compared with those in the near field.

• Nuclear Engineering and Technology
• /
• v.54 no.10
• /
• pp.3897-3908
• /
• 2022

High-fidelity nuclear data libraries and neutronics simulation tools are essential for the development of fast reactors. The IAEA coordinated research project on "Neutronics Benchmark of CEFR Start-Up Tests" offers valuable data for the qualification of nuclear data libraries and neutronics codes. This paper focuses on the verification and validation of the CEFR start-up modelling using OpenMC Monte-Carlo code against the experimental measurements. The OpenMC simulation results agree well with the measurements in criticality, control rod worth, sodium void reactivity, temperature reactivity, subassembly swap reactivity, and reaction distribution. In feedback coefficient evaluations, an additional state method shows high consistency with lower uncertainty. Among 122 relative errors in the benchmark of the distribution of nuclear reaction, 104 errors are less than 10% and 84 errors are less than 5%. The results demonstrate the high reliability of OpenMC for its application in fast reactor simulations. In the companion paper, the influence of cross-section libraries is investigated using neutronics modelling in this paper.

• The Journal of Economics, Marketing and Management
• /
• v.11 no.1
• /
• pp.31-44
• /
• 2023

Purpose: This study aims to figure out the characteristics of corporate life cycle and resource input in terms of the sustainability diagnosis of pharmaceutical companies in Korea. Research design, data, and methodology: Using the Gompertz model under the assumption that companies have finite resources, this study tries quantitative interpretation of life cycle and resource input pattern for longevity companies with 25 years of experience among 158 pharmaceutical companies listed on Korean stock market based on maturity of revenue. Results: The study found revenue maturity through Gompertz model was statistically correlated with enterprise value. According to the life cycle analysis, more than 95% of 59 pharmaceutical companies were in the growth and maturity phase and have an average life cycle of 88 years and an average remaining life of 52 years. Regarding maturity profile of resource input, maturity of employees was generally high more than 60% and this meant there was jobless growth in Korean pharmaceutical industry. Conclusion: This study demonstrated there is a high statistical correlation between the maturity of a company's resource input and its revenue and enterprise value. It is believed that these results could be utilized as a basis for high fidelity function that predict revenue and enterprise value based on resource input information.

• Journal of the Korean Society of Radiology
• /
• v.84 no.1
• /
• pp.240-252
• /
• 2023

Purpose To assess the effect of deep learning image reconstruction (DLIR) for head CT in pediatric patients. Materials and Methods We collected 126 pediatric head CT images, which were reconstructed using filtered back projection, iterative reconstruction using adaptive statistical iterative reconstruction (ASiR)-V, and all three levels of DLIR (TrueFidelity; GE Healthcare). Each image set group was divided into four subgroups according to the patients' ages. Clinical and dose-related data were reviewed. Quantitative parameters, including the signal-to-noise ratio (SNR) and contrast-to-noise ratio (CNR), and qualitative parameters, including noise, gray matter-white matter (GM-WM) differentiation, sharpness, artifact, acceptability, and unfamiliar texture change were evaluated and compared. Results The SNR and CNR of each level in each age group increased among strength levels of DLIR. High-level DLIR showed a significantly improved SNR and CNR (p < 0.05). Sequential reduction of noise, improvement of GM-WM differentiation, and improvement of sharpness was noted among strength levels of DLIR. Those of high-level DLIR showed a similar value as that with ASiR-V. Artifact and acceptability did not show a significant difference among the adapted levels of DLIR. Conclusion Adaptation of high-level DLIR for the pediatric head CT can significantly reduce image noise. Modification is needed while processing artifacts.

• Journal of Mechanical Science and Technology
• /
• v.20 no.4
• /
• pp.561-568
• /
• 2006

CFD simulation for one of tilt-rotor UAV configurations, TR-E2S1, was performed to investigate its aerodynamic characteristics. Control surfaces such as elevator and rudder were deflected and wing incidence angle was changed. Also aerodynamic stabilities were analyzed with the variation of pitch and yaw angles. The comparison of CFD with wind tunnel test results reveals the same trends in the aerodynamic characteristics and stabilities. However 12% scale wind tunnel test model is too small for accurate data collection and should build a high fidelity model for quantitative data comparison.

• Structural Engineering and Mechanics
• /
• v.11 no.2
• /
• pp.133-149
• /
• 2001

A high-fidelity model of a tracked vehicle traversing a flexible ground terrain with a varying profile is presented here. In this work, we employed a recursive formulation to model the track subsystem. This method yields a minimal set of coordinates and hence, computationally more efficient than conventional approaches. Also, in the vehicle subsystem, the undercarriage frame is assumed to be connected to the chassis by a revolute joint and a spring-damper unit. This increase in system mobility makes the model more realistic. To capture the vehicle-ground interaction, a Winkler-type foundation with springs-dampers is used. Simulation runs of the integrated tracked vehicle system for vibrations for four varying ground profiles are provided.

• Transactions of the KSME C: Technology and Education
• /
• v.3 no.2
• /
• pp.97-106
• /
• 2015

Flexible structures are often important components of mechanical assemblies in motion. A flexible structure sometimes must go through assembly steps that cause it to be in a pre-stressed condition when in the starting position for operation. A virtual prototype of the assembly must also bring the model of the flexible structure into the same pre-stressed condition in order to obtain accurate simulation results. This case study is presented regarding the simulation of a constant velocity joint, with a focus on the flexible boot. The case study demonstrates that careful definition of the initial conditions of the boot and flexible body contacts yields high-fidelity simulation results.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.106.2-106.2
• /
• 2010

IGCC (Integrated Gasification Combined Cycle) plants are among the most advanced and effective systems for electric energy generation. From a control perspective, IGCC plants represent a significant challenge: complex reactions, highly integrated control to simultaneously satisfy production, controllability, operability and environmental objectives. While all these requirements seem clearly to demand a multivatiable, model predictive approach, not many applications can be easily found in the literature. This paper describes the IGCC dynamic simulation that is capable of simulating plant startup, shutdown, normal, and abnormal operation and engineering studies. This high fidelity dynamic models contain the detailed process design data to produce realistic responses to process operation and upset. And the simulation is used by engineers to evaluate the transient performance and produce graphical information indicating the response of the process under study conditions.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.15-23
• /
• 2006

본 논문은 다양한 형태의 객체데이터를 포함하는 하이브리드환경에 대한 안정적이고 사실적인 햅틱 제시 방법을 제안한다. 제안된 방법은 가상객체를 기술하는 방법에 의존하지 않고 일관된 방법으로 충돌검출 및 반력계산을 수행한다. 따라서 사용자 및 개발자는 부가적인 노력 없이 다양한 컨텐츠를 활용할 수 있으며, 빠르고 쉽게 가상환경을 구축할 수 있다. 또한 제안된 방법은 멀티 스레드로 구현된 안정화 연산을 수행하며, 이를 통해 느린 햅틱랜더링 속도를 가지는 환경에 대해서도 안정적이고 사실적인 역감을 제시한다. 따라서 제안된 방법은 다양한 응용분야에서 햅틱기술을 보다 쉽고 보다 효과적으로 적용할 수 있는 기회를 제공할 수 있다.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.22 no.2
• /
• pp.180-189
• /
• 2015

Purpose: The purpose of this study was to identify the types of errors that occurred and were recovered in a simulated transfusion scenario by nursing students. Methods: Twenty-eight teams of a total of 89 nursing students participated in a transfusion simulation using a high fidelity simulator. Data were collected by observing rule based errors and built in errors recovered according to the framework of Eindhoven model. Reflective journaling was used to identify perceived safety-threatening errors and commitment to improvement. Data were analyzed using descriptive statistics. Results: All teams committed the rule based errors in the scenario. The most common errors occurred in the coordination category related to communication with physician. Most of students perceived the transfusion reaction as a safety-threatening error. Conclusion: The findings indicate that students lack patient safety competence. The simulation training to decrease errors and improve safe practice provides nursing students with an effective strategy to develop patient safety competence.