• Journal of Welding and Joining
• /
• 제27권5호
• /
• pp.68-73
• /
• 2009

The bar horn is designed to increase uniformity of the displacement on the output face through simulation and experiments. Three-dimensional modal analysis is conducted using the finite element method to calculate the vibration mode and displacement on the output face, and the design of experiment (DOE) technique is employed to determine the optimum dimensions of the groove and slot so that the high amplitude uniformity of the bar horn is produced. Displacement of the bar horn was measured using the Laser Doppler Vibrometer (LDV), and the experimental results show good agreements with the predicted results. High uniformity of the bar horn is achieved with the dimensions of the groove and slot determined using the design equations.

• 한국식생활문화학회지
• /
• 제20권1호
• /
• pp.35-43
• /
• 2005

The purpose of this study was to identify the perceptional dimensions and patterns of Korean traditional food and to find the determinants of the patterns. Data were collected from 305 Korean housewives living in Mongol, and were factor and cluster analyzed. The results revealed two different dimensions and patterns i.e., high involved vs. low involved groups. Descriptive statistics showed that perceptional pattern types are likely to vary depending on socio-demographic and cultural background of Korean traditional food. Similarities and differences in perceptional patterns between high and low involved groups of Korean Mongolian are discussed, and future implications for globalization of Korean traditional food culture are provided.

• 한국정밀공학회지
• /
• 제19권6호
• /
• pp.29-34
• /
• 2002

This paper presents formation of ejector-pin hollowness in injection molding. Injection molding process is widely used in production of plastic part for good dimensional accuracy and high productivity. However, the injection molding leaves ejector-pin hollowness on pal, which causes bad part surface and quality. Dimensions and profiles of ejector-pin hollowness are measured for formation or ejector-pin hollowness. The formation of ejector-pin hollowness is traced with dimensions and profiles of ejector-pin hollowness. The compression force and moment cause ejector-pin to form hollowness on part surface.

• 품질경영학회지
• /
• 제33권3호
• /
• pp.71-90
• /
• 2005

New high-speed rail service, the Korea Train Express(KTX), has been beginning service in Korea. We measured the service quality of the Korea Train Express and comparatively analyzed the service quality of domestic flight and express buses which are means of long distance transportation. Furthermore, by using the Kano model, the perception level of the service of customers is not only segmented in groups but also switching barriers are derived. As a result, the customers by group have a difference in the level of their perception. While in both high-speed bullet train service and flights dimensions significantly affect the customer satisfaction and retention excluding a responsiveness dimension, in the Train Express four dimensions(Reliability, Responsiveness, Assurance, Tangibles) with the exception of Empathy which significantly affect the customer satisfaction and retention.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.668-671
• /
• 2007

A numerical study was conducted on a simplified model of a high-temperature solar receiver which incorporates liquid-metal heat pipe. The objective of this paper is to compare the isothermal characteristics of the heat pipe receiver with the conventional receiver utilizing convection of molten salt as heat carrier. The solar receiver was assumed to be subject to a concentration ratio between 50 and 1,000 to supply high-temperature heat to a stirling engine for electric power generation. For simplicity of the analysis, a cylindrical geometry was assumed and typical dimensions were used based on available literature. The heat pipe had a shape of double-walled cavity and the working fluid was a sodium. The analysis was performed assuming that the radiation heat flux on the inner walls of the receiver was uniform, since the focus of this study was laid on the comparison of the conventional type and heat pipe type receiver. The results showed that the heat pipe type exhibited superior performance when the operating temperature becomes higher. In addition, to explore the advantage of the heat pipe receiver, the channel shape and dimensions should be adjusted to increase the heat transfer area between the wall and the heat trnasfer medium.

• 한국의류학회지
• /
• 제44권6호
• /
• pp.1139-1153
• /
• 2020

Upper body types were classified to develop the sizing system of the cycling wear top for the high school male cyclist. The research methods were performed using the anthropometric measurements of 111 high school male cyclists that included cluster analysis was performed. The research results are as follows. Type 1 (23.4%) has the longest biocromion length, is the tallest of the three types and a proper body type. Type 2 (25.2%) has the largest weight and developed muscles in the chest parts. Type 3 (51.4%) is the shortest of the three types and is a skinny body with a bending back. In order to develop a sizing system, the 12 anthropometric measurements were selected for correlation analysis. The bust circumference and stature were presented as the control dimensions of sizing system. The waist front, waist back length and biacromion length were less correlated with other items; consequently, they were independent items and were set as referable dimensions. Therefore, it was proposed as a sizing system because the 5 cm of bust and 5 cm of stature have a high coverage by body type. The total coverage rate was 81.9%.

• 한국항해항만학회지
• /
• 제42권3호
• /
• pp.177-186
• /
• 2018

보트의 초기설계단계에서 설계자는 주요치수 결정을 위해 많은 정보를 필요로 하며, 그러한 정보의 대부분은 해당 보트와 유사한 실적선 자료들을 많은 시간에 걸쳐 조사 및 분석함으로써 얻을 수 있다. 또한, 결정된 주요치수는 설계과정(기본/상세설계) 전반에 걸쳐 영향을 미치게 되고, 이는 결국 보트의 안정성과 성능으로 직결된다. 따라서 본 연구에서는 700여 척의 실적선 자료를 이용하여 보트 초기설계시스템(설계지원플랫폼)을 개발하고, 50피트급 고속보트를 대상으로 이를 활용하여 설계자가 초기설계단계에서도 주요치수를 편리하고 합리적으로 도출 및 결정할 수 있음을 확인하였다.

• 대한치과교정학회지
• /
• 제24권4호
• /
• pp.885-895
• /
• 1994

This study was performed to compare the dental arch dimensions of urban and rural high school females according to the region of residence and facial type. A model and cephalometric analysis was made from 48 urban and 48 rural high school females. The results of this study were obtained as follows : 1. Arch width in the urban group were similar to the rural group. 2. Lingual arch length at upper 1st premolar level in the urban group was larger than the rural group and lingual arch length at lower canine level in rural group was larger than the urban group. 3. Palatal height at canine level in the rural group was higher than the urban group. 4. Palatal heights at 2nd premolar and 1st molar level had correlation with the VERT index. In comparison of lingual arch dimensions according to Rickett's facial group, palatal heights at 2nd premolar and 1st molar level in dolichofacial group were lower than other groups.

• 한국의류학회지
• /
• 제27권7호
• /
• pp.851-861
• /
• 2003

The objectives of this study were to investigate the effect of perceiver's fashion involvement, clothing color, and background of object person on image perceptions of clothing, and to examine how clothing color preference vary according to perceiver's fashion involvement. Subjects were 273 college women in the metropolitan area of Seoul. The T-shirt was changed into 11 colors by using the CAD system. Five factors were derived to account for the dimensions of image perception. These were individuality, elegance, femininity, activity, and neatness. Perceiver's fashion involvement gave a significant influence on perception of individuality. Clothing color gave significant influences on 5 image dimensions. White and beige were evaluated neat image. Neatness factor had an interaction effect by fashion involvement and clothing color. The high involvement group evaluated white and beige shirt more neatly, and orange and yellow less neatly than the low involvement group. Individuality and elegance had an interaction effect by fashion involvement and background of object person. The high involvement group liked red, violet, and black shirt more than the low involvement. Refined and becomingness image gave significant influences on clothing color preference in both high and low involvement groups.

• 한국안전학회지
• /
• 제11권4호
• /
• pp.3-9
• /
• 1996

In this study, comparison of theoretical solutions with experimental results is examined through fracture conditions for the case of float glasses subjected static loading. The range of fracture generation limits and critical penetration energies are solved according to the impactor mass under the high velocity, and analytical method of fracture strength and penetration strength are presented. Also, fracture patterns are investigated according to impact velocities. The results obtained from this study are as follows ; 1) Radial cracks are generated from the loading point regardless of plate thickness in the case of the plate subjected to the static loading. In the case of high-speed impact, dimensions of ring cracks become to smaller and length of radial cracks becomes shorter with the rapidity of impact velocity. 2) Kinetic change volume of collision after/before is constant regardless of velocities over the range of critical penetration velocity. 3) Although the same impact energy is working, the critical penetration energy is increased with the shorter of impactor mass. 4) Although the same impact energy is working, the penetration fracture of lighter Impactor mass is generated more than that of heavier impactor mass, and the impulse of lighter impacter mass appear more than that of heavier impactor mass. Therefore, the penetration fracture in the case of greater impulse is generated earlier regardless of the of the dimensions of Impact loading.