Browse > Article
http://dx.doi.org/10.5781/KWJS.2009.27.5.068

Design of Bar Horn for Ultrasonic Bonding  

Kim, Sun-Rak (Dept. of Mech. Eng., KAIST)
Lee, Jae-Hak (Dept. of Ultra Precision Mechanics and Systems, KIMM)
Yoo, Choong-D. (Dept. of Mech. Eng., KAIST)
Publication Information
Journal of Welding and Joining / v.27, no.5, 2009 , pp. 68-73 More about this Journal
Abstract
The bar horn is designed to increase uniformity of the displacement on the output face through simulation and experiments. Three-dimensional modal analysis is conducted using the finite element method to calculate the vibration mode and displacement on the output face, and the design of experiment (DOE) technique is employed to determine the optimum dimensions of the groove and slot so that the high amplitude uniformity of the bar horn is produced. Displacement of the bar horn was measured using the Laser Doppler Vibrometer (LDV), and the experimental results show good agreements with the predicted results. High uniformity of the bar horn is achieved with the dimensions of the groove and slot determined using the design equations.
Keywords
Ultrasonic bonding; Bar horn; Design of experiments; Slot; Groove;
Citations & Related Records
연도 인용수 순위
  • Reference
1 K.-W. Lee, H.-J. Kim, M.-J. Yim, and K.-W. Paik: "Curing and bonding behaviors of Anisotropic Conductive Films (ACFs) by ultrasonic vibration for flip chip interconnection, 56th Electronic Components and Technology Conference, San Diego, California, USA (2006)
2 S.-R. Kim, J. H. Lee, C. D. Yoo: Design of Cylinder Horn for Ultrasonic Welding (to be published in J. of KWJS)
3 A. Cardoni and M. Lucas: Strategies for reducing stress in ultrasonic cutting systems, Strain, 41-1(2005), 11-18   DOI   ScienceOn
4 AWS: Welding Handbook, 8th ed. (1991)
5 K. Adachi and S. Ueha: Modal vibration control of large ultrasonic tools with the use of wave-trapped horns, J. of Acoust. Soc. Am., 87-1(1990), 208-215   DOI
6 Y. Ming, L. Shih Fu, S. Zheng: A new optimization method for horn designs in ultrasonic welding systems, SIM Tech Technical Report (PT/02/006/JT)
7 A. Cardoni, M. Lucas: Enhanced vibration performance of ultrasonic block horns, Ultrasonics, 40(2002), 365-369   DOI   ScienceOn