• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.2
• /
• pp.43-47
• /
• 2016

This paper covers the study on the properties of $TiO_2$ film deposited by atomic layer deposition (ALD) using TTIP and water at various temperatures including the low temperature range of <$150^{\circ}C$. At low deposition temperature, ALD $TiO_2$ films showed uniform growth rate per cycle ($0.3{\AA}/cycle$), good uniformity, smooth surface, and homogenous amorphicity. They also showed good conformality of >80% on the trench structure with the high aspect ratio of up to 75. However, relatively high concentration of impurities (C~4-7 at%) in the film was observed due to low deposition temperature.

• Journal of the Korean Chemical Society
• /
• v.58 no.2
• /
• pp.210-220
• /
• 2014

In this study, the illustrations in the 27 middle school science textbooks developed under the 2009 Revised National Curriculum were analyzed in the aspect of gender-role stereotype, and the results were compared with those of the 2007 Revised National Curriculum. The results of the analyses revealed that male pupils in the illustrations appeared more frequently than female pupils at all grades, and that the gender gap of pupils appeared in the illustrations slightly increased in comparison with those of the precedent curriculum. Similar to those of the precedent curriculum, the gender gap in other activities were particularly large regardless of publishers. In the illustrations of adults, the frequencies of male outnumbered female, and highly gender biased compared with those of pupils to mean that gender bias in the illustrations of adults were not improved at all. While the ratio of female was high in house works, that of male was high in outdoor activities regardless of publishers. The gender gap in outdoor activities increased in comparison with that of the precedent curriculum. Most occupations illustrated were male-dominated, and the majority of scientists were portrayed as male.

• Journal of the Korea Concrete Institute
• /
• v.27 no.3
• /
• pp.291-298
• /
• 2015

In this paper, a bundled diagonal reinforcement using high performance steel fiber was proposed to enhance the construct ability and seismic performance. Experiments of coupling beam was composed of four specimens and the hysteretic behavior evaluated for reverse cyclic loading to specimens using high performance steel fiber. The main variables of the experiment is a amount of stirrup and bundled reinforcement, depending on whether the mix of steel fiber. Specimen which criteria was applied 100% of stirrup and bundled diagonal reinforcement of ACI318 criteria. With this, by appling same diagonal reinforcement, two specimens were created by adjusting stirrup of 75%, 50%. So, a total of four specimens were produced. When coupling beam was placed concrete, this experiment was mixed in a content of steel fiber 1%. All the specimens were produced by aspect ratio 3.5(l/h=1050/300) to a half-scale. In this result, two specimens as reduced to stirrup of 75%, 50% was no significant difference in the strength, stiffness and energy dissipation capacity, respectively compared to the stirrup of 100%.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.12
• /
• pp.113-123
• /
• 2012

Recently, various attempts have been made to apply Intelligent Transportation System under various environments and conditions. Consequently, an accurate license plate recognition regardless of vehicle location and viewing angle is required. In this paper, we propose a novel license plate recognition system which exploits a) the format of license plates to remove false candidates of license plates and to extract characters in license plates and b) the characteristics of Hangul for accurate character recognition. In order to eliminate false candidates of license plates, the proposed method first aligns the candidates of license plates horizontally, and compares the position and the shape of objects in each candidate with the prior information of license plates provided by Korean Ministry of Construction & Transportation. The prior information such as aspect ratio, background color, projection image is also used to extract characters in license plates accurately applying an improved local binarization considering luminance variation of license plates. In case of recognizing Hangul in license plates, they are initially grouped according to their shape similarity. Then a super-class method, a hierarchical analysis based on key feature points is applied to recognize Hangul accurately. The proposed method was verified with high recognition rate regardless of background image, which eventually proves that the proposed LPR system has high performance regardless of the vehicle location or viewing angle.

• Journal of the Korean Chemical Society
• /
• v.56 no.4
• /
• pp.509-517
• /
• 2012

In this study, the illustrations of 27 middle school science textbooks developed under the 2007 Revised National Curriculum were analyzed in the aspect of gender-role stereotyping, and the results were compared with those of the 7th National Curriculum. The types of the illustrations were classified, and the frequencies of pupils and adults who appeared on the illustrations were counted by gender, and the types of activities and the character of them were also analyzed by gender. In all results of the analyses, the differences between male and female decreased in comparison with those of the 7th National Curriculum. More male pupils appeared in the illustrations than female pupils. The frequencies of learning activities were balanced by gender, but other activities were described as focusing on male pupils. The frequencies of male adults outnumbered female adults. While the ratio of female adults was high in houseworks, that of male adults was high in outdoor activities. The jobs of adults were also illustrated as male-centered. Most pupils and adults were found to be active. Both ratios of pupils and adults for each gender were relatively similar.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.363-363
• /
• 2014

Ruthenium (Ru) has attractive material properties due to its promising characteristics such as a low resistivity ($7.1{\mu}{\Omega}{\cdot}cm$ in the bulk), a high work function of 4.7 eV, and feasibility for the dry etch process. These properties make Ru films appropriate for various applications in the state-of-art semiconductor device technologies. Thus, it has been widely investigated as an electrode for capacitor in the dynamic random access memory (DRAM), a metal gate for metal-oxide semiconductor field effect transistor (MOSFET), and a seed layer for Cu metallization. Due to the continuous shrinkage of microelectronic devices, better deposition processes for Ru thin films are critically required with excellent step coverages in high aspect ratio (AR) structures. In these respects, atomic layer deposition (ALD) is a viable solution for preparing Ru thin films because it enables atomic-scale control of the film thickness with excellent conformality. A recent investigation reported that the nucleation of ALD-Ru film was enhanced considerably by using a zero-valent metallorganic precursor, compared to the utilization of precursors with higher metal valences. In this study, we will present our research results on the synthesis and characterization of novel ruthenium complexes. The ruthenium compounds were easy synthesized by the reaction of ruthenium halide with appropriate organic ligands in protic solvent, and characterized by NMR, elemental analysis and thermogravimetric analysis. The molecular structures of the complexes were studied by single crystal diffraction. ALD of Ru film was demonstrated using the new Ru metallorganic precursor and O2 as the Ru source and reactant, respectively, at the deposition temperatures of $300-350^{\circ}C$. Self-limited reaction behavior was observed as increasing Ru precursor and O2 pulse time, suggesting that newly developed Ru precursor is applicable for ALD process. Detailed discussions on the chemical and structural properties of Ru thin films as well as its growth behavior using new Ru precursor will be also presented.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.7
• /
• pp.629-634
• /
• 2017

In the case of the UHP (Ultra high performance) tire that the demand has increased rapidly, compared with the commonly used tire, severe deformation has been observed because of the low aspect ratio. When repeated deformations are applied to the sidewall rubber, accumulated fatigue damage may cause fatigue failure. Thus, the evaluation of the durability of the tire sidewall rubber has become a very important issue to prevent accidents that occur while the vehicle is running. However, the research and design criteria for the durability performance of the tire sidewall rubber hardly exist. In this study, we suggest a lifetime prediction formula using strain energy density obtained by performing tensile tests and fatigue tests on two different kinds of the tire sidewall compounds. Additionally, the applicability of our findings for low fuel consumption tires was reviewed by converting the fatigue life of the sidewall rubber into the expected mileage of the tire.

• Journal of the Korean Magnetics Society
• /
• v.5 no.4
• /
• pp.275-280
• /
• 1995

The sites for $Fe^{+3}$ are partly substituted by $Co^{+2}$ and $Ti^{+4}$ cations to control coercivity of Ba-ferrite particles for use in high density magnetic recording. The substituted $Co^{+2}$ cation has very much different effects on magnetic properties and particle characteristics from that $Ti^{+4}$ cation has. The decrease in the coercivity with the $Co^{+2}$ substitution is attributed to the formation of excessive spinel-block(S-block) in pure Ba-ferrite crystal, while saturation magnetization is increased and the distributions of coercivity and particle size become broad. The substitution with the $Ti^{+4}$ decreases the sauration magnetization, but has less effect on a change in coercivity than the $Co^{+2}$. The $Ti^{+4}$ acts as a nucleation agent in amorphous phase of formulated compound, and consequently particle size and aspect ratio are decreased. Furthermore, the enhancement of substitution of the $Co^{+2}$ for the $Fe^{+3}$ sites in rhombohedral-block(R-block) by the $Ti^{+4}$ retards the nucleation of spinel phase of Ba-ferrite, which results in uniform magnetic properties of Ba-ferrite particles. It is suggested that the contents of the cations to be substituted for the $Fe^{+3}$ sites are optimized on the bases of magnetic properties and particle characteristics rather than on the base of electrical charge balance.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.154-154
• /
• 2006

Samsung Electro Mechanics ink jet has developed ultra high resolution alignment system. The alignment system has been developed for repeatable printing of conductive ink. The resolution of alignment system is 0.5um and the velocity of printing working plate is 1.5m/s. So far repeated printing results included sintering process have over 30um of drop mislocation data. In order to improve line thickness and conductivity of metal line, we need to develop the higher mechanical accurate align system. On the demand, this developed align system has under $1{\sim}2{\mu}m$ mispositioning performance and can measure of mechanical accuracy of inkjet printer, as well as the straightness of jetted drop from inkjet head. There is no kinds limit of substrate and ink to use SEM alignment system. By using this alignment system, we progress two experiment of reiterate printing drop and making conductive line on the glass and photo paper. Optical microscope and 3D profiler has been used for measurement of printed ink.

• Journal of Korean Society of Rural Planning
• /
• v.26 no.4
• /
• pp.67-79
• /
• 2020

As globalization, international cooperation has grown in importance. In accordance with this trend, Korea has been receiving high demands from international organizations about expanding the scale of Official Development Assistance(ODA) in line with its improved national status. In addition, in the economic aspect of Korea, the ODA project is expected to provide new growth opportunities in the mid- to long-term by promoting cooperation with developing countries. Uganda is an area with high strategic value due to good agricultural conditions and favorable geographical conditions. The poultry industry is a business that is generally carried out to the Ugandan, but due to economic problems such as initial investment cost, most of them have raised poultry on a small scale which is not enough for main income. This paper proposes the construction and operation plan of adapting to small poultry farms in the village-intensive type to sustainable income for residents in Uganda through ODA project in Korea's agricultural technology. The economic feasibility was analyzed from the long-term perspective when the initial construction cost was supported or not and the poultry species ratio was adjusted in terms of initial and operating costs. Economic analysis was performed using Net Present Value(NPV) method. As of after 10 years, when operating in the form of shifting kuroiler to layers, it was estimated to earn about 700,000 ugx more than when only kuroiler is raised, and it is able to reduce about 14 million ugx from the initial cost than when only raising layers. As of 20 years, the most profitables scenario was the breeding of 100 kuroilers and 400 layers methods. however, this case was anlayzed to be unsuitable for Uganda farmers, with initial costs more than three times higher than the shifting method of the kuroiler to layers. If the initial construction cost is supported by ODA project, the initial investment cost can be recovered in the first year with the shifting method, whereas raising only layers take two years to recoup the cost. In the meantime, when studying livestock industry in Uganda, it was examined by relying on statistical data, but this paper is meaningful in that it predicted how much it is economically effective based on field experience.