• Korean Journal of Breeding Science
• /
• v.42 no.3
• /
• pp.212-217
• /
• 2010

A new waxy corn hybrid 'Daedukchal 1' was developed from single cross between CNU 504 and CNU 2396 at Chungnam National University in 2007. Inbred CNU 504 used as a seed parent and inbred CNU 2396 as a pollen parent were collected throughout domestic regions. Tasseling date of this hybrid was seven days later than that of check hybrid, 'Chalok 1'. 'Daedukchal 1' was 19.7 cm in ear length and 4.5 cm in ear diameter. On yield trial, ear length of this hybrid was increased 29.7% compared with a check hybrid, 'Chalok 1'. 'Daedukchal 1' had white kernels and good eating quality due to high sugar content and thinner pericarp. The ratio of kernel set length/ear length was similar to 'Chalok 1'. It is moderately resistant to southern leaf blight and northern leaf blight but susceptible to corn borer. The yields of 'Daedukchal 1' in fresh ear weight and in number of fresh ear were 16% and 8%, respectively, higher than those of a check hybrid in regional yield trials for two years. Seed production for this hybrid was better because of the consistency of tasseling dates.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.8 no.1
• /
• pp.107-112
• /
• 2004

The combining abilities in the 5 newly evolved thermo tolerant breeds viz., SR6, SR7, SR8 SR9 and SR10 of silkworm Bombyx mori L. and their 15 hybrids were made in a line${\times}$tester crossing programme. Data were analysed for seven quantitative traits i.e., pupation rate, cocoon yield, cocoon weight, cocoon shell weight, cocoon shell ratio, filament length and raw silk percentage under optimum room temperature $(25{\pm}{1^{\circ}C})$ conditions (In case of high temperature $(36{\pm}{1^{\circ}C})$ stress conditions five economic traits except filament length and raw silk percentage) with 3 widely adapted testers i.e., KA, CSR2 and CC1 as lines (females) and testers (males) respectively. The performance at high temperature and low humidity conditions aye only taken into consideration for selecting the best lines/hybrids. Among the lines SR6 exhibited positive General combining ability (GCA) effects for pupation rate, cocoon yield, cocoon weight and cocoon shell ratio traits, followed by SR7 for pupation rate, cocoon yield and cocoon shell weight and cocoon shell ratio. Among testers, KA exhibited positive GCA effects for two quantitative traits cocoon yield, cocoon weight and CSR2 for cocoon shell weight and cocoon shell ratio under adverse temperature conditions. The hybrid SR6${\times}$CC1 and SR7${\times}$CSR2 exhibited significant positive Specific combining ability (SCA) effects for majority of the traits in high temperature stress conditions of rearing. The better parent value of heterosis(Heterobeltiosis) was exhibited by the hybrid SR6${\times}$CC1 for pupation rate, cocoon yield, cocoon weight and cocoon shell weight and SR7${\times}$CSR2 for all the trails evaluated under high temperature conditions. Based on the results, the lines SR6 and SR7 was judged as best combiners and the hybrids SR6${\times}$CC1 and SR7${\times}$CSR2 can be selected for commercial exploitation in tropical climate.

• Korean Journal of Plant Resources
• /
• v.1 no.1
• /
• pp.1-7
• /
• 1988

This experiment were carried out to study the heritability, genotypic, pheno-typic and environmental correlation in four edible oil crops. Heritabilities of flowering date, maturing date, plant height and weight of 1, 000 grains in rape were high. A highly significant positive correlation was found between flowering date and maturing date, plant hight and ear length, number of pods per ear and flowering date, maturing date and plant hight, The number of seed per pod showed also significant positive correlation with flowering or maturing date as well as with the relationship between weight of 1, 000 grains and plant height or ear length inrapeseed, respectively. Heritabilities of maturing date, length of stem with eapsule and number of seed per capsule were high, in sesame. Genotypic correlation between plant height and length of stem with capsule, length of stem with capsule and number of capsule per plant, number of capsule per plant and weight of 1, 000 grains, weight of 1, 000 grains and yield were highy positive in sesame. Heritabilities of flowering date, length of main stem, weight of 100 grains and number of shells per square meter in peanut were high, There was positive genotypic correlation between length of main stem and yield, number of shells per quare meter and matured seed ratio, number of shells per square meter and yield, 100 grains weight and yield. On the other hand, a significant negative correlation appeared between flowering date and yield. Heritabilities of days to flowering, stem length, stem diameter and weight of 1, 000 grains in perila were high. There was positive genotypic correlation between stem length and stem diameter, number of pods per plant, stem weight etc, between number of internodes and number of pods per plant, stem weight, number of valid branches and number of pods plant as well, respectively. While, a significant negative correlation was observed between number of valid branches and weight of 1, 000 grains, between number of pods per plant and weight of 1, 000 grains.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.8
• /
• pp.1159-1163
• /
• 2006

This experiment was performed to examine the influences of high ambient temperature on milk production, nutrient digestibility, energy and protein sufficiency ratio, and plasma metabolites concentration in lactating cows. In a $2{\times}2$ crossover design, four multiparous lactating Holstein cows were maintained in a chamber under treatment of constant moderate ($18^{\circ}C$) ambient temperature (MT) or high ($28^{\circ}C$) ambient temperatures (HT). The DMI and milk protein yield were significantly lower in HT (p<0.05). The milk yield, milk lactose yield, and milk SNF yield tended to be lower in HT (p<0.10). No statistical differences for 4% fat-corrected milk and milk fat yield were observed. Rectal temperatures were significantly higher in HT than MT (p<0.05). The apparent DM, OM, ether extract, CF, and ash digestibility did not differ between treatments. On the other hand, the apparent CP digestibility was increased significantly (p<0.05) and nitrogen free extract tended to increase (p<0.10) in HT. The sufficiency ratio of ME and DCP intake for each requirement tended to be lower in HT than in MT (p<0.10). Concentrations of total protein (TP), albumin, and urea nitrogen in plasma did not differ between treatments. Plasma 3-methylhistidine (3MH) concentration as a marker of myofibrillar protein degradation tended to be higher in HT (p<0.15). In conclusion, high ambient temperature was associated with a lower energy and protein sufficiency ratio, and decreased milk protein production, even though the body protein mobilization tended to be higher.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.1
• /
• pp.48-54
• /
• 1989

This study was conducted to select the best adapted alfalfa cultivars among 32 introduced alfalfa cultivars in the Korean environmental condition. Plant height and dry matter yield per cultivar were determined. On the point of plant height, seven high ranked cultivars among the 32 alfalfa cultivars in high order were Diamond> Milkmaker> Arrow>Chalienger>Sapphire > Dekalb brand 135> LS-1920. and seven low ranked cultivars in low order were Pioneer brand 5929> Maxidor> Dekalb brand 167> Pierce> Blazer> Raidor> Pioneer brand 532. Seven high ranked cultivars from 32 alfalfa cultivars on the dry matter yield in high order were Pike>LS-1920>Challenger>Salute>Diamond>Decathlon>Pioneer brand 581, and seven low ranked cultivars in low order were Maxidor>Pioneer brand 5929>Pioneer brand 532>Florida 77> Pierce> Magnum> Blazer. Dry matter yield per cultivar was also greater when alfalfa cultivar was appeared higher plant height compared with those which were lower plant height. Leading cultivars for plant growth and yield under the Korean environmental condition were Pike, LS-1920, Challenger, Salute, Diamond among the 32 alfalfa cultivars. All those cultivars except Challenger cultivar are Semi-dormant which can be well grown under moderate temperatures.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.3
• /
• pp.213-219
• /
• 2013

A field study was conducted to understand nitrogen use efficiency of high yielding Japonica rice varieties under three levels of nitrogen fertilizer (90, 150 and 210 kg N $ha^{-1}$) in Iksan, Korea. Two high yielding rice varieties, Boramchan and Deuraechan, and an control variety, Dongjin2, were grown in fine silty paddy. Nitrogen use efficiencies (NUE) were 83.3, 56.3, and 41.2 in 90, 150, and 210 kg N $ha^{-1}$ fertilizer level, respectively. Total nitrogen uptake varied significantly among nitrogen levels and varieties. Variety Dongjin2 showed the highest nitrogen uptake efficiency (NUpE), while Boramchan and Deuraechan showed higher nitrogen utilization efficiency (NUtE). However, Nitrogen harvest index (NHI) was higher in Boramchan (0.58) than Deuraechan (0.57) and Dongjin2 (0.53). Rough rice yield showed linear relationship with total nitrogen uptake ($R^2$=0.72) within the range of nitrogen treatments. Boramchan produced significantly higher rough rice yield (8546 kg $ha^{-1}$) which mainly due to higher number of panicles per $m^2$ compared to Deuraechan (7714 kg $ha^{-1}$). Deuraechan showed higher number of spikelets per panicle, but showed lower yield due to lower number of panicle per $m^2$. Rice varieties showed different nitrogen uptake ability and NUE at different nitrogen level. Plant breeders and agronomist should take advantage of the significant variations and relationships among grain yield, NUpE, and NUE.

• Transactions of Materials Processing
• /
• v.31 no.6
• /
• pp.351-364
• /
• 2022

The yield criterion, or called yield function, plays an important role in the study of plastic working of a sheet because it governs the plastic deformation properties of the sheet during plastic forming process. In this paper, we propose a modified version of previous anisotropic yield function (Trans. Mater. Process., 31(4) 2022, pp. 214-228) based on J2 and J3 stress invariants. The proposed anisotropic yield model has the 6th-order of stress components. The modified version of the anisotropic yield function in this study is as follows. f(J₂⁰,J₃⁰) ≡ (J₂⁰)³ + α(J₃⁰)² + β(J₂⁰)^3/2 × (J₃⁰) = k⁶ The proposed anisotropic yield function well explains the anisotropic plastic behavior of various sheets such as aluminum, high strength steel, magnesium alloy sheets etc. by introducing the parameters α and β, and also exhibits both symmetrical and asymmetrical yield surfaces. The parameters included in the proposed model are determined through an optimization algorithm from uniaxial and biaxial experimental data under proportional loading path. In this study, the validity of the proposed anisotropic yield function was verified by comparing the yield surface shape, normalized uniaxial yield stress value, and Lankford's anisotropic coefficient R-value derived with the experimental results. Application for the proposed anisotropic yield function to AA6016-T4 aluminum and DP980 sheets shows symmetrical yielding behavior and to AZ31B magnesium shows asymmetric yielding behavior, it was shown that the yield locus and yielding behavior of various types of sheet materials can be predicted reasonably by using the proposed anisotropic yield function.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.4
• /
• pp.247-255
• /
• 2005

ice yield and plant growth response to nitrogen (N) fertilizer may vary within a field, probably due to spatially variable soil conditions. An experiment designed for studying the response of rice yield to different rates of N in combination with variable soil conditions was carried out at a field where spatial variation in soil properties, plant growth, and yield across the field was documented from our previous studies for two years. The field with area of 6,600 m2 was divided into six strips running east-west so that variable soil conditions could be included in each strip. Each strip was subjected to different N application level (six levels from 0 to 165kg/ha), and schematically divided into 12 grids $(10m \times10m\;for\;each\;grid)$ for sampling and measurement of plant growth and rice grain yield. Most of plant growth parameters and rice yield showed high variations even at the same N fertilizer level due to the spatially variable soil condition. However, the maximum plant growth and yield response to N fertilizer rate that was analyzed using boundary line analysis followed the Mitcherlich equation (negative exponential function), approaching a maximum value with increasing N fertilizer rate. Assuming the obtainable maximum rice yield is constrained by a limiting soil property, the following model to predict rice grain yield was obtained: $Y=10765{1-0.4704^*EXP(-0.0117^*FN)}^*MIN(I-{clay},\;I_{om},\;I_{cec},\;I_{TN},\; I_{Si})$ where FN is N fertilizer rate (kg/ha), I is index for subscripted soil properties, and MIN is an operator for selecting the minimum value. The observed and predicted yield was well fitted to 1:1 line (Y=X) with determination coefficient of 0.564. As this result was obtained in a very limited condition and did not explain the yield variability so high, this result may not be applied to practical N management. However, this approach has potential for quantifying the grain yield response to N fertilizer rate under variable soil conditions and formulating the site-specific N prescription for the management of spatial yield variability in a field if sufficient data set is acquired for boundary line analysis.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.11
• /
• pp.1597-1602
• /
• 2006

The effects of different mineral supplementations on the milk yield of free-ranging Somali camels were investigated in two phases in a semi-arid region of northern Kenya during the dry and wet seasons in 2002 and 2003. In phase 1, twelve (12) lactating camels were selected at random to form four (4) groups each consisting of three camels. The first group served as the control and as a result received no mineral supplementation. In addition to the control diet the other groups received oral doses of minerals as follows over a 60-day period: T1 (P), T2 (High Cu low Co) and T3 (Low Cu high Co). The daily milk yield and blood mineral profiles were measured during the wet and dry seasons. The mean daily milk yield increased from 3.4 L/d to $4.3{\pm}0.3L/d$ and 5.2 L/d in the dry and wet seasons, respectively. Fifteen (15) lactating camels were selected at random to form five groups each consisting of three replicates. The control group did not receive any mineral supplement. The other four groups in addition to the control diet, received the following treatments: T4 (Common Salt), T5 (High Co), T6 (High Co+P) and T7 (Low Co+P). Mineral supplement T6 produced significantly higher milk yield ($5.4{\pm}0.5$ and $6.5{\pm}0.7L/d$) during the dry and wet seasons. Both T6 and T7 had significantly higher milk yield than T4 and T5. During both phases, the blood Ca and P level significantly increased in camels receiving T1, 6 and 7. Animals that received only the trace mineral supplements had lower blood P compared to the ones receiving supplementary P and also the control. Supplementation of lactating camels with Co and P significantly (p<0.05) increased milk yield). Effect of common salt, commonly given by farmers, on milk yield was insignificant. It was concluded that mineral supplementation to lactating camels was beneficial, and that mineral supplements should include P and Co. Further research is required to establish P and Co requirements of lactating camels.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.7
• /
• pp.1044-1052
• /
• 2015

The aim of this modelling study was to investigate the effect of large herd size (and land areas) on walking distances and milking interval (MI), and their impact on milk yield and economic penalties when 50% of the total diets were provided from home grown feed either as pasture or grazeable complementary forage rotation (CFR) in an automatic milking system (AMS). Twelve scenarios consisting of 3 AMS herds (400, 600, 800 cows), 2 levels of pasture utilisation (current AMS utilisation of 15.0 t dry matter [DM]/ha, termed as 'moderate'; optimum pasture utilisation of 19.7 t DM/ha, termed as 'high') and 2 rates of incorporation of grazeable complementary forage system (CFS: 0, 30%; CFS = 65% farm is CFR and 35% of farm is pasture) were investigated. Walking distances, energy loss due to walking, MI, reduction in milk yield and income loss were calculated for each treatment based on information available in the literature. With moderate pasture utilisation and 0% CFR, increasing the herd size from 400 to 800 cows resulted in an increase in total walking distances between the parlour and the paddock from 3.5 to 6.3 km. Consequently, MI increased from 15.2 to 16.4 h with increased herd size from 400 to 800 cows. High pasture utilisation (allowing for an increased stocking density) reduced the total walking distances up to 1 km, thus reduced the MI by up to 0.5 h compared to the moderate pasture, 800 cow herd combination. The high pasture utilisation combined with 30% of the farm in CFR in the farm reduced the total walking distances by up to 1.7 km and MI by up to 0.8 h compared to the moderate pasture and 800 cow herd combination. For moderate pasture utilisation, increasing the herd size from 400 to 800 cows resulted in more dramatic milk yield penalty as yield increasing from c.f. 2.6 and 5.1 kg/cow/d respectively, which incurred a loss of up to $AU 1.9/cow/d. Milk yield losses of 0.61 kg and 0.25 kg for every km increase in total walking distance (voluntary return trip from parlour to paddock) and every one hour increase in MI, respectively. The high pasture utilisation combined with 30% of the farm in CFR in the farm increased milk yield by up to 1.5 kg/cow/d, thereby reducing loss by up to $0.5/cow/d (c.f. the moderate pasture and 800 cow herd scenario). Thus, it was concluded that the successful integration of grazeable CFS with pasture has the potential to improve financial performance compared to the pasture only, large herd, AMS.