• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1631-1635
• /
• 2011

To consider dynamic magnification effect at the static design stage, impact load factor is applied to design load. Current impact load factor adopted EUROCODE without verification while Japan suggested impact load factor including velocity of high-speed train throughout theoretical and experimental studies. On the purpose of evaluate current impact load factor, this study investigated the calculation of impact load factor from dynamic response of running train.

• Structural Engineering and Mechanics
• /
• 제82권1호
• /
• pp.81-92
• /
• 2022

Ultra-high performance fiber reinforced concrete (UHPFRC) is a composite building material with high ductility, fatigue resistance, fracture toughness, durability, and energy absorption capacity. The aim of this study is to develop a nonlinear finite element model that can simulate the response of the UHPFRC beam exposed to impact loads. A nonlinear finite element model was developed in ABAQUS to simulate the real response of UHPFRC beams. The numerical results showed that the model was highly successful to capture the experimental results of selected beams from the literature. A parametric study was carried out to investigate the effects of reinforcement ratio and impact velocity on the response of the UHPFRC beam in terms of midpoint displacement, impact load value, and residual load-carrying capacity. In the parametric study, the nonlinear analysis was performed in two steps for 12 different finite element models. In the first step, dynamic analysis was performed to monitor the response of the UHPFRC beam under impact loads. In the second step, static analysis was conducted to determine the residual load-carrying capacity of the beams. The parametric study has shown that the reinforcement ratio and the impact velocity affect maximum and residual displacement value substantially.

• 한국안전학회지
• /
• 제27권4호
• /
• pp.43-49
• /
• 2012

In the design of high speed railway bridges is important a impact factor as a tool of assessing the dynamic capacitys of bridges. However, the impact factor(or dynamic amplification factor, DAF) of high speed railway bridges may essentially be changeable because the dynamic response is affected by the long train length(380 m), number of axles and high speed velocity(300 km/h)(Korea Train eXpress: KTX). Therefore, on this study will be examined the dynamic capacity and stability of the typical PSC Box Girder of high speed railway bridge. At first, the static/dynamic analysis is performed considering the axle load line of KTX based upon existing references. Additionally, the KTX moving load is transformed into the dynamic time series load for conducting various parameter studies like axle length, analytical time increment, velocity of KTX. The time history analysis is repeatedly performed to get maximum dynamic responce by varying axle load length, analytical time increment, velocity of KTX. The study shows that dynamic analysis has resonable results with optimal axle load length(0.6 m) and time increment(0.01 sec.) and maximum DAF and dynamic resonance happens at 270 km/h velocity of KTX.

• 대한기계학회논문집A
• /
• 제21권10호
• /
• pp.1589-1597
• /
• 1997

The high-velocity impact forging process with eccentric loading condition is analyzed using the explicit time integration finite element method. In order to consider the strain hardening, strain rate hardening and thermal softening effects, which are frequently observed in high-velocity deformation phenomena, the Johnson-Cook constitutive model is applied to model the workpiece. It is assumed that the material response of the dies is elastic in the study. As a result of the eccentric loading simulation, it is found that the increase of the eccentric ratio and the allowable tilting angle cause the decrease of the maximum forging load and the blow efficiency, and it is also found that the forging load and the blow efficiency generated in the high-velocity impact forging process with three-dimensional geometry can be obtained efficiently.

• 대한기계학회논문집
• /
• 제14권2호
• /
• pp.298-309
• /
• 1990

In this paper, a new method is suggested to analyze impulsive stresses at loading poing of concentrated impact load under certain impact conditions determined by impact velocity, stiffness of plate and mass of impact body, etc. The impulsive stresses are analyzed by using the three dimensional dynamic theory of elasticity so as to analytically clarify the generation phenomenon of cone crack at the impact fracture of fragile materials (to be discussed if the second paper). The Lagrange's plate theory and Hertz's law of contact theory are used for the analysis of impact load, and the approximate equation of impact load is suggested to analyze the impulsive stresses at the impact point to decide the ranage of impact load factor. When impact load factors are over and under 0.263, approximate equations are suggested to be F(t)=Aexp(-Bt)sinCt and F(t)=Aexp(-bt) {1-exp(Ct)} respectively. Also, the inverse Laplace transformation is done by using the F.F.T.(fast fourier transform) algorithm. And in order to clarity the validity of stress analysis method, experiments on strain fluctuation at impact point are performed on a supported square glass plate. Finally, these analytical results are shown to be in close agreement with experimental results.

• 한국건설순환자원학회논문집
• /
• 제8권3호
• /
• pp.349-355
• /
• 2020

이 연구의 목적은 섬유의 혼입량과 종류에 따른 고강도 섬유보강 복합재료의 정적하중에서의 압축강도 및 인장거동과 비상체 하중 하에서의 충격 저항성을 조사하고자 한다. 이를 위하여 3가지 배합을 설계하였고, 압축강도, 직접인장, 그리고 고속 비상체 충돌 실험을 수행하였다. 실험결과 섬유의 혼입량은 압축강도에 비하여 인장강도에 큰 영향을 미치며, 하이브리드 섬유 사용으로 인장변형성능이 향상되는 것으로 나타났다. 강섬유의 혼입량은 충격 저항성에 큰 영향을 미치는 것으로 나타났다. 하이브리드 섬유를 사용하면 충격 저항성이 더욱 향상되는 것으로 나타났다. 다만, 단일 섬유 사용에 비하여 실험체별성능 차이가 크게 발생하는 것으로 나타났다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.319-326
• /
• 2000

It is investigated character of the dynamic behavior at over excavation zone of roadbed using crushed stone instead of lean concrete. It is considered that behavior of roadbed using PENTAGON-3D and Baber's equation. Typical load of sine wave type using impact factor is compared to moving load system to examine relationship in using PENTAGON-3D case. Variations of this paper are material properties of roadbed, train velocity, subgrade bearing capacity. Using variations, safety of roadbed is estimated by dynamic behavior character.

• 콘크리트학회논문집
• /
• 제28권4호
• /
• pp.455-462
• /
• 2016

본 실험적 연구는 고속 비상체 충돌 시 UHPC 외장재의 내충격성을 파악하는데 그 목적이 있다. 이 연구에서는 두께를 주요 변수로 UHPC과 화강암 패널 실험체에 고속충격을 가하여 실험체의 성능을 비교하였으며, 배면의 변형률을 기록하였다. UHPC는 외관이 우수하였으며, 내충격성도 화강암에 비해 우수하여 외장재로 사용하기에 적당하다고 판단된다. 비상체가 시험체에 충돌한 후 압축파가 배면에 도달하고 그 후 자유단 지점을 중심으로 인장파가 발생하여서 배면파괴를 일으킨 것으로 사료된다. 이러한 배면파괴 발생 메커니즘은 변형률 기록이 압축파구간, 보합구간, 인장구간으로 나누어지는 것을 통해 알 수 있다. 관통파괴 형태를 살펴보면 고속 충돌 시 전단력이 배면에 작용하여 파괴가 발생되는 shear plug 현상이 나타난 것으로 판단된다. 즉 충격하중에 대하여 배면의 파괴는 전단력과 인장응력에 의해 동시에 영향을 끼쳐 발생한 것으로 사료된다.

• Computers and Concrete
• /
• 제22권1호
• /
• pp.123-132
• /
• 2018

Reinforced concrete (RC) columns which are the main vertical structural members are exposed to several static and dynamic effects such as earthquake and wind. However, impact loading that is sudden impulsive dynamic one is the most effective loading type acting on the RC columns. Impact load is a kind of impulsive dynamic load which is ignored in the design process of RC columns like other structural members. The behavior of reinforced concrete columns under impact loading is an area of research that is still not well understood; however, work in this area continues to be motivated by a broad range of applications. Examples include reinforced concrete structures designed to resist accidental loading scenarios such as falling rock impact; vehicle or ship collisions with buildings, bridges, or offshore facilities; and structures that are used in high-threat or high-hazard applications, such as military fortification structures or nuclear facilities. In this study, free weight falling test setup is developed to investigate the behavior effects on RC columns under impact loading. For this purpose, eight RC column test specimens with 1/3 scale are manufactured. While drop height and mass of the striker are constant, application point of impact loading, stirrup spacing and concrete compression strength are the experimental variables. The time-history of the impact force, the accelerations of two points and the displacement of columns were measured. The crack patterns of RC columns are also observed. In the light of experimental results, low-velocity impact behavior of RC columns were determined and interpreted. Besides, the finite element models of RC columns are generated using ABAQUS software. It is found out that proposed finite element model could be used for evaluation of dynamic responses of RC columns subjected to low-velocity impact load.

• Composites Research
• /
• 제25권5호
• /
• pp.147-153
• /
• 2012

본 논문에서는 복합재 적층판의 고속충격 관통에너지를 예측하는 방법 중 하나인 정적압입 관통 실험을 수행하였다. 정적압입 관통 에너지를 정확히 분석하기 위해서 세 가지 방법을 이용하였다. 첫 번째로 AE 센서 신호 변화를 이용해서 압입 관통 지점을 판단하고 관통 에너지를 구하는 방법, 두 번째는 관통된 시편에 다시 관통실험을 수행하여 두 에너지 차를 이용해서 구하는 방법, 세 번째는 재수행한 관통실험의 하중-변위 그래프에서 최대하중지점을 압입 관통 지점으로 판단하고 에너지를 구하는 방법이다. 위 방법들에 의한 관통에너지 예측 결과를 제시하였고 고속충격 실험 결과와 비교하여 타당성을 검증하였다.