• Journal of Environmental Health Sciences
• /
• v.22 no.2
• /
• pp.90-95
• /
• 1996

This study was performed to calculate the degration rate coefficient, operating parameters to meet the effluent standards, and the temperature adjustment coefficients to each parameter of pollution by seasonal variation of concentration and temperature of influent in livestock wastewater treatment by sequencing batch reactor process in field scale. The followings are the conclusions that were derived from this study. 1. In the field, temperature of livestock wastewater in reactor was 20.3$\circ$C in summer and 6.0$\circ$C in winter. The ratio of BOD:TKN: T-P in influent was 100:80:7. BOD loadings in winter and spring were 0.26 and 0.43 kg $BOD/m^3$ day, respectively. Those in summer and fall were 0.25 and 0.13 kg $BOD/m^3$ day, respectively. 2. The degradation rate coefficient for TKN was larger in summer and fall in which temperature was high than that in which temperature was high than that in winter and spring in which concentration was high. On the contrary, the phosphorus uptake rate was larger in winter and spring than that in summer and fall. 3. The hydraulic retention time in winter and spring was longer than that in summer and fall. Especially, in order to meet the standard for TKN of 120 mg/l in winter in which temperature of wastewater was 6.0$\circ$C, as the MLSS concentration was increased from 4, 000 to 7, 000 mg/l, the hydraulic retention time was increased from 212 to 121 hours. But, in order to shorten that less than 121 hours for the economical wastewater treatment, countermeasure to increase temperature of wastewater in the reactor should be considered. 4. the temperature adjustment coefficients for BOD, $COD_{Mn}$, TKN and T-P were 1.0241, 1.0225, 1.0541 and 1.0495, respectively. Namely, the treatment of TKN was most sensitively affected by temperature. For the purpose of the effective removal of nitrogen and phosphorus which are sensitive to temperature, it is necessary to keep the temperature of livestock wastewater more than 20$\circ$C which is the temperature of it in summer.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.12 no.2
• /
• pp.51-56
• /
• 2006

Use of products containing phytoecdysteroid (PE) as active principle has become popular in prominent sericultural areas of India for hastening larval maturation events and synchronizing cocoon spinning activities as an obvious advantage is assured. At times, the present recommendation of administering PE at the onset of spinning results in peak labour requirement at odd hrs. To enable making recommendation for the use of PE on $multi{\times}bivoltine$ silkworm hybrids based on the climatic conditions prevailing in different areas especially with regard to temperature, the experiment was taken up to determine proper treatment times so that the induced spinning will be more orderly and the labour can be leveraged more efficiently. Different brackets of low ($18-22^{\circ}C$), medium ($24-28^{\circ}C$) and high ($29-32^{\circ}C$) temperature were simulated during the latter half of V larval instar and cocoon spinning. PE was administered to $multi{\times}bivoltine$ silkworm ($BL67{\times}CSR101$) hybrid batches as per the recommended dose at three different times viz., 10 am, 4 pm and 10 pm. Three replicates of 100 larvae were maintained for each treatment. Absolute controls were also maintained in each temperature range to compare the results. Cumulative maturation percentage was recorded at 6 hrs interval to ascertain peak mounting span. The influence of the treatment on the cocoon traits also was studied. Based on the peak mounting span, it was evident that in low temperature 10 pm treatment would be better. In medium and high temperature, treatment at 4 pm proved to be a better option. The influence of the treatment times at different temperature range on labour management is discussed.

• Transactions of Materials Processing
• /
• v.15 no.8 s.89
• /
• pp.539-543
• /
• 2006

Experimental studies are carried out in order to investigate the effects of heat treatment on the surface machined by W-EDM. In this work, two ways of heat treatment after W-EDM are considered. As a comparison, the machined surface by a traditional method such as milling/grinding is also considered. Thereby, specimens are prepared by four different machining methods. Those are (1) milling and then grinding, (2) wire-cut electric discharge machining (W-EDM), and (3) low temperature heat treatment or (4) high temperature heat treatment after W-EDM. The resulting surface roughness are measured and the changes of surface microstructures are investigated using the scanning electron microscope (SEM) with energy dispersive X-ray spectrometer (EDS). In general, heat treatment after W-EDM result in smoother surface and better chemical composition at the machined surface. Especially, high temperature tempering could remove defects in the thermally affected zone, which cause an overall deterioration of the surface machined by W-EDM.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.4
• /
• pp.307-317
• /
• 2021

In recent years, global warming has led to frequent climate change-related problems, and elevated temperatures, among adverse climatic factors, represent a critical problem negatively affecting crop growth and yield. In this context, the present study examined the physiological traits of wheat plants grown under high temperatures. Specifically, the effects of elevated temperatures on seed development after heading were evaluated, and the vegetation indices of different organs were assessed using hyperspectral analysis. Among physiological traits, leaf greenness and OJIP parameters were higher in the high-temperature treatment than in the control treatment. Similarly, the leaf photosynthetic rate during seed development was higher in the high-temperature treatment than in the control treatment. Moreover, temperature by organ was higher in the high-temperature treatment than in the control treatment; consequently, the leaf transpiration rate and stomatal conductance were higher in the control treatment than in the high-temperature treatment. On all measuring dates, the weight of spikes and seeds corresponding to the sink organs was greater in the high-temperature treatment than in the control treatment. Additionally, the seed growth rate was higher in the high-temperature treatment than in the control treatment 14 days after heading, which may be attributed to the higher redistribution of photosynthates at the early stage of seed development in the former. In hyperspectral analysis, the vegetation indices related to leaf chlorophyll content and nitrogen state were higher in the high-temperature treatment than in the control treatment after heading. Our results suggest that elevated temperatures after the booting stage positively affect wheat growth and yield.

• Journal of Forest and Environmental Science
• /
• v.34 no.1
• /
• pp.61-65
• /
• 2018

To know if small changes in rearing water temperature and density affect the number of bacterial and fungal colonies in metamorphosed frogs, Dybowski's frog tadpoles were reared from Gosner 25-26 stages at either low ($1^{\circ}C$ low to ambient water temperature), ambient, or high ($1^{\circ}C$ high) water temperature (each 15 tadpoles in 20 L water) condition and at either low (10 tadpoles/20 L water), medium (20 tadpoles), or high (30 tadpoles) density condition. Immediately after metamorphosis, we sampled bacteria and fungi from skin, liver, and heart of six metamorphosed frogs, randomly selected for each treatment group. After separate incubation of bacteria and fungi on 3M Petrifilm plates, we counted the number of bacterial and fungal colonies appeared on the plates and compared the numbers among the temperature and density treatment groups. For temperature treatment, high-temperature group had fewer bacterial colonies, while low-temperature group had more fungal colonies than the other two groups. For density treatment, low-density group had fewer bacterial colonies than the other two groups, but the number of fungal colonies were not different among the groups. Our results suggest that small increased rearing water temperature and lowered rearing density could potentially reduce pathogens in farming frogs.

• The Journal of the Korean dental association
• /
• v.56 no.7
• /
• pp.385-390
• /
• 2018

Laser means "Light amplification by stimulated emission of radiation". Laser have unique characteristics according to wavelength. Wavelenth of Waterlase is 2780nm and it can be absorbed to water and hydroxyapatite. When laser is applied to some material, its temperature goes up due to laser's energy. But in dental treatment high temperature is not good for teeth. High temperature can make dental pulp and bone necrosis. Waterlase can be absorbed to water droplet, so when it burst, it can cut soft and hard tissue without raising temperature. so it is so proper to dental treatment.

• Journal of Sericultural and Entomological Science
• /
• v.29 no.2
• /
• pp.44-50
• /
• 1987

The silkworms were inoculated with flacherie virus and reserved at high temperature (37$^{\circ}C$) to find out the effect of high temperature on the multiplication of the virus in silkworms. The obtained results are summarized as follows. 1. It was shown that the inhibitory effect of high temperature treatment on the virus multiplication was achieved at high level at the newly molted stages in 5th instar larvae and both in 4th and in 5th larvae. 2. Twelve hours treatment and 24 hours treatment showed high inhibitory effect on the multiplication of flacherie virus. 3. The silkworms were inoculated with flacherie virus at the newly molted stage in 2nd instar larvae and followed by have temperature (37$^{\circ}C$) treatment at the newly molted stages in 5th instar and both in 4th and in 5th instar for 12 and 24 hours respectively. The increase in the survival rate with high temperature treatment ranged from 33.8 to 39.5 percent in index number and cocoon productive was 45.8 to 54.2 percent compared to non-treatment. 5. In the inoculation of the virus to the 4th instar larvae, the high temperature treatment at the newly molted stage in 5th instar brought increases in the survial rate from 49.7 to 68.9 percent in index number and in cocoon production from 44.3 to 69.0 percent.

• Journal of Environmental Science International
• /
• v.25 no.4
• /
• pp.535-542
• /
• 2016

This study was conducted to investigate effects of waterlogging on the growth, physiological responses, and yield of Kimchi cabbage. The growth of Kimchi cabbage with applied optimized air temperature (set to $20^{\circ}C$) was greater than those with high air temperature (set to $30^{\circ}C$) and the growth significantly decreased by severe waterlogging treatment. The net photosynthetic rate of outer leaves on one hour after waterlogging treatment was higher at 72 hours waterlogging treatment in $20^{\circ}C$ and lower at 24 hours of waterlogging treatment in $30^{\circ}C$. The root activity was decreased by the elevation of waterlogging periods in $20^{\circ}C$ treatment and lower by the short of waterlogging periods in $30^{\circ}C$ treatment. The ratio of formality with non-waterlogging treatment was approximately 64% under $20^{\circ}C$ air temperature and that of range was from 16 to 30% under $30^{\circ}C$. The yield under $20^{\circ}C$ showed higher than that under high air temperature. The non-waterlogging treatment in $20^{\circ}C$ had 4,463 kg/10a, which was the greatest among all treatments, while yields of non-waterlogging treatment at $30^{\circ}C$ were significantly low as 1,082 kg/10a. Results suggested that additional drainage work should be needed to overcome waterlogged conditions of open field during heavy rainfall and should be drainage as soon as possible if there are waterlogging.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.121-121
• /
• 2017

The productivity of rice has been influenced by various abiotic factors including temperature which cause to limitations to rice yield and quality. Rice yield and quality are adversely affected by high temperature globally. In the present study, four Korean four cultivars such as Dongan, Ilpum, Samkwang, Chucheong were investigated in order to explore molecular mechanisms of high temperature at seedling stage. Rice seedlings grown at $28/20^{\circ}C$ (day/night) were subjected to 7-day exposure to $38/28^{\circ}C$ for high-temperature stress, followed by 2-D based proteomic analysis on biological triplicates of each treatment. The growth characteristics demonstrated that Dongan is tolerant while Ilpum is sensitive to high-temperature stress. High temperature has an adverse effect in the seedling stage both in high temperature sensitive and tolerant cultivar. Two-dimensional gels stained with silver staining, a total of 722 differential expressed protein spots (${\geq}1.5-fold$) were identified using Progenesis SameSpot software. However, a total of 38 differentially expressed protein spots were analyzed by LTQ-FT-ICR MS. Of these, 9 proteins were significantly increased while 10 decreased under high-temperature treatment. Significant changes were associated with the proteins involved in the carbohydrate metabolism, photosynthesis, and stress responses. Proteome results revealed that high-temperature stress had an inhibitory effect on carbon fixation, ATP production, and photosynthetic machinery pathway. The expression level of mRNA is significantly correlated with the results obtained in the proteome investigation. Taken together, these findings provide a better understanding of the high-temperature resistance by proteomic approaches, providing valuable insight into improving the high-temperature stress tolerance in the global warming epoch.

• Journal of the Korean Society for Heat Treatment
• /
• v.26 no.3
• /
• pp.105-112
• /
• 2013

The microstructural changes of Fe-20Mn-12Cr-1Cu alloy have been studied during high temperature gas nitriding (HTGN) at the range of $1000^{\circ}C{\sim}1150^{\circ}C$ in an atmosphere of nitrogen gas. The mixed microstructure of austenite and ${\varepsilon}$-martensite of as-received alloy was changed to austenite single phase after HTGN treatment at the nitrogen-permeated surface layer, however the interior region that was not affected nitrogen permeation remained the structure of austenite and ${\varepsilon}$-martensite. With raising the HTGN treatment temperature, the concentration and permeation depth of nitrogen, which is known as the austenite stabilizing element, were increased. Accordingly, the depth of austenite single phase region was increased. The outmost surface of HTGN treated alloy at $1000^{\circ}C$ appeared Cr nitride. And this was in good agreement with the thermodynamically calculated phase diagram. The grain growth was delayed after HTGN treatment temperature ranges of $1000^{\circ}C{\sim}1100^{\circ}C$ due to the grain boundary precipitates. For the HTGN treatment temperature of $1150^{\circ}C$, the fine grain region was shown at the near surface due to the grain boundary precipitates, however, owing to the depletion of grain boundary precipitates, coarse grain was appeared at the depth far from the surface. This depletion may come from the strong affinity between nitrogen and substitutional element of Al and Ti leading the diffusion of these elements from interior to surface. Because of the nitrogen dissolution at the nitrogen-permeated surface layer by HTGN treatment, the surface hardness was increased above 150 Hv compared to the interior region that was consisted with the mixed microstructure of austenite and ${\varepsilon}$-martensite.