• 한국초전도ㆍ저온공학회논문지
• /
• 제20권4호
• /
• pp.26-30
• /
• 2018

The turn-to-turn contact resistance of 2G high temperature superconducting (HTS) coils with metal insulation (MI) is closely related to the stability of the coils, current charging rate and delay time [1]. MI coils were fabricated using five kinds of metal tapes such as aluminum (Al) tape, brass tape, stainless steel (SS) tape, copper (Cu)-plated tape and one-sided Cu-plated SS tape. The turn-to-turn contact surface resistances of co-winding model coils using Al tape, brass tape, and SS tape were 342.6, 343.6 and $724.8{\mu}{\Omega}{\cdot}cm^2$, respectively. The turn-to-turn contact resistance of the model coil using the one-sided Cu-plated SS tape was $ 248.8{\mu}{\Omega}{\cdot}cm^2$, which was lower than that of Al and brass tape. Al or brass tape can be used to reduce contact resistance and improve the stability of the coil. Considering strength, SS tape is recommended. For strength and low contact resistance, SS tape with copper plating on one side can be used.

• 에너지공학
• /
• 제20권3호
• /
• pp.185-190
• /
• 2011

본 논문은 초전도 에너지 저장장치(SMES)용 전도냉각형 고온초전도 자석의 설계, 제작 및 평가에 대해 기술한다. 고온초전도 자석은 황동 안정화재를 갖는 2개의 Bi-2223 다심 선재가 적층된 4-ply 도체로 제작된 22개의 double pancake coil(DPC)로 구성된다. 그리고, 각 DPC는 내경과 외경이 각각 500 mm, 691 mm이고 높이가 10 mm인 2개의 single solenoid coil로 구성된다. 코일 내부의 전기적 손실에 의해 발생된 열의 냉각을 위하여 DPC 사이에 두께 3 mm의 알루미늄 판이 내재된다. 고온초전도 자석은 2단 Gifford McMahon 냉동기에 의해 5.6 K까지 냉각된다. 충전전류가 증가할수록 방전시 고온초전도에서의 최대 온도가 증가 하였다. 충전전류가 360 A일 때 ��치 없이 고온초전도 자석에 1 MJ의 자기에너지가 성공적으로 저장되었다. 본 연구에서는 SMES용 전도 냉각형 고온초전도자석에 대한 열적, 전자기적 특성을 보이고, 본 연구를 통해 얻어진 결과는 전도냉각형 고온초전도자석의 최적설계 및 안정도 평가에 활용될 것이다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 추계학술대회
• /
• pp.142-146
• /
• 1996

In this paper, we present the main research results on the 2 Tesla class - superconducting MRI magnet which we have developed. Multi section type superconducting MRI main coil and various superconducting shims were designed and fabricated for obtaining the high field homogeneity, which is requested in the MR imaging. After assembling the magnet with room temperature bore cryostat field homogenity has been measured and analyzed by NMR field mapping system. According to this, field homogeneity of 22 ppm / 30 cm dsv was confirmed.

• 한국초전도ㆍ저온공학회논문지
• /
• 제13권1호
• /
• pp.12-16
• /
• 2011

In this paper, the prototype of the HTS motor with an on-board cryocooler, is fabricated and tested. The overall system is composed of the stator with conventional copper winding, the rotor with superconductor, and the rotating cryocooler designed from the on-board concept. The rotor is fabricated as the race-track coil with 2G, YBCO tape and contacts with the on-board cryocooler while being rotated together. An inline-type pulse tube refrigerator is used as the on-board cryocooler. The cryocooler is fabricated from optimal process to satisfy the structure and thermal stability of the on-board system. Each component is integrated according to carefully defined sequence. Specially, a combining method of torque tubes is an important part for sustaining stability of the rotor and the cryocooler. In the rotating test, the HTS motor is successfully operated with 240 rpm of rotating speed when 75 A current is supplied to the superconducting rotor. In this paper, potential problems of the HTS motor system using the on-board cryocooler are proposed and solved, and realistic possibility of this concept is also confirmed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.766-767
• /
• 2008

임계온도가 높아 시스템응용에서 매우 안정한 장점을 지닌 고온초전도(HTS)도체를 이용한 HTS-SMES(Superconducting Magnetic Energy Storage)장치에 대하여 많은 연구가 진행되고 있다[1]-[2]. 이런 HTS-SMES 장치의 고가성, 복잡성 등 원인에 기인하여 운전에 앞서 장치의 임계전류, 자속유동손실 및 충.방전시 불가피하게 발생되는 교류손실 등과 같은 기본적인 특성들이 선행하여 연구되어야 한다. 따라서 본 연구에서는 600 kJ급 HTS-SMES코일에 대한 자장분석을 기반으로 코일의 임계전류밀도 분포를 계산하였고 최소 임계전류밀도에 근거하여 코일의 임계전류를 결정하였다. 그 주요 결과를 요약하면 코일에서 자장과 임계전류밀도 분포는 코일의 형상에 무관하게 같은 분포 경향을 보여주며 최소 임계전류밀도는 코일의 top과 bottom의 중심에 위치하며, model코일에서 임계전류의 계산값과 측정값이 비교적 잘 일치하였기 때문에 600 kJ급 HTS-SMES코일도 잘 일치할 것으로 사료된다. 또한 SMES코일을 20 K에서 운전한다고 가정하면 코일 임계전류의 ${\sim}60%$, 4.2 K에서는 ${\sim}40%$에서 각각 운전하게 될 것으로 예측된다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제4권2호
• /
• pp.31-37
• /
• 2002

A 100 〔HP〕 rated synchronous motor with superconducting rotating field winding has been designed based on the formulated equations established from 2 dimensional magnetic field distributions in a cylindrical coordinate The cross-section was drawn based on calculated design results via Fortran program and then modeled with FEM (Finite Element Method) to investigate the machine performances. First of all, the magnetic field distributions are analysed in many ways according to the field directions and the armature currents. Especially after the rotating Held winding is arranged with BSCCO-2223 high-temperature superconducting(HTS) pancake coils, the exerted magnetic field normally on the HTS tape is calculated through FEM. And the machine output power is calculated according to the torque ang1es which lie between the field and the armature main flux lines. Moreover, this Paper includes the eddy-current loss variations of a copper damper located between the field and the armature coils and design considerations of the 100 HP HTS motor utilizing ferro-magnetic material.

• 한국초전도ㆍ저온공학회논문지
• /
• 제21권1호
• /
• pp.10-14
• /
• 2019

Radio-frequency (RF) amplifiers based on direct current (DC) superconducting quantum interference device (SQUID) have low-noise performance for precision physics experiments. Gain curves of SQUID RF amplifiers depend on several parameters of the SQUID and operation conditions. We are developing SQUID RF amplifiers for application to measure very weak RF signals from ultra-low-temperature high-magnetic-field microwave cavity in axion search experiments. In this study, we designed, fabricated and characterized SQUID RF amplifiers with different SQUID parameters, such as number of input coil turn, shunt resistance value of the junction and coupling capacitance in the input coil, and compared the results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.693-694
• /
• 2006

In order to develop a high temperature superconducting(HTS) coil for the fault current limiter(FCL), the over-current characteristics in YBCO coated conductor(CC) with Ni-W alloy substrate are analyzed. The HTS wire is wound by bifilar winding method for resistive current limitation and it is operated in 65K sub-cooled nitrogen. In order to analyze the resistance and the temperature characteristics of the CC wire, an analysis program is developed considering all the composition materials except the buffer layer. Using this program, the temperature rise, the resistance development and the current limitation of CC are calculated depending on the applied voltage and the stabilizer materials. According to the analysis results, under the temperature restriction of 300K, the maximum voltage per meter is determined as 40V/m if the stabilizer is $25{\mu}m$ thick stainless steel at each side. Finally, the wire length needed for the distribution level HTS FCL is estimated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.587-589
• /
• 2000

In this paper, the stability criterion for cryocooler-cooled high-temperature superconducting (HTS) coils is discussed. We choose the current, Itr at which "thermal runaway" occurs, as a stability criterion and adopt the relationship between the cooling power of GM cryocooler and the heat generation in coil system to evaluate Itr. We also investigate the transient behavior during a quench process in HTS coils by a newly developed FEM computer program.

• 한국초전도ㆍ저온공학회논문지
• /
• 제10권1호
• /
• pp.57-61
• /
• 2008

A 1MW class HTS(High-Temperature Superconducting) synchronous motor has been developed. This motor was aimed to be utilized for industrial application such as large motors operating in large plants. The HTS field windings of the developed motor is cooled by way of Neon thermosiphon mechanism and the stator coil is cooled by water through hollow copper conductor. This paper describes performance test results of our motor, which was conducted at steady state in generator mode and motor mode.