• Culinary science and hospitality research
• /
• v.7 no.1
• /
• pp.91-105
• /
• 2001

Chou-cream bread and Red bean paste bread were made by sponge & dough method with the sweet dough formula. The bread quality was studied by the measurements of the temperature variation, the fermentation level of frozen dough in the special condition(dough conditioner of 5$^{\circ}C$, 10$^{\circ}C$, 15$^{\circ}C$, 20$^{\circ}C$ and 30$^{\circ}C$), the product volume and thesensory evaluation with frozen dough thawed, fermented and baked. When thawing temperature was low, the core temperature of frozen dough increased slowly and the time for thawing and fermentationwas long. In thawing and fermentation, the core temperature of Red bean paste dough increased faster than that of Chou-cream dough. When the thawing conditions of dough conditioner(retarder) were 20$^{\circ}C$ and 30$^{\circ}C$, the level of total time decrease for thawing and fermentation was 55 and 86 min in Chou-cream dough and 62 and 90 min in Red bean paste dough respectively in comparison to dough conditioner of 5$^{\circ}C$. In volume of baked products, they showed no significant difference for three weeks of storage, but slight difference for four weeks of storage. The result was that Chou-cream bread was larger than Red bean paste bread in the decrease of volume. In sensory evaluation, the bread quality became low according to the time. When stored for four weeks in the freezer, significant differences were found in Chou-cream vread, but slight difference appeared in Red bean paste bread. The research identified that Red bean paste dough was more effective in manufacturing time than that of Chou-cream dough, when thawing temperature was high, and if frozen dough was thawed in the retarder of lower than 20$^{\circ}C$, the bread quality in terms of volume and sensory evaluation had no significant difference in comparison to the none-freezing Red bean paste bread.

• Korean Journal of Food Science and Technology
• /
• v.40 no.2
• /
• pp.238-242
• /
• 2008

In this study, hydrogen sulfide ($H_2S$) production was examined during beer fermentation using two ale and two lager yeast strains. In the lager yeast fermentation, a large amount of $H_2S$ was produced in the early fermentation stages when the yeast were actively fermenting wort, indicating a positive relationship between the level of H2S production and the yeast growth rate during fermentation. The ale yeasts produced much lower levels of H2S than the lager yeasts. In the lager fermentation, a higher fermentation temperature shortened the fermentation period, but much higher levels of $H_2S$ were produced at higher temperatures. American pilsner lager yeast fermenting at $15^{\circ}C$ produced a relatively high level of $H_2S$ at the end of fermentation, which would require a longer aging time to remove this malodorous volatile sulfur compound. Not including the English ale strain, which produced a higher level of H2S at lower temperatures, the ale yeast produced lower levels of $H_2S$ at lower temperatures, suggesting that each strain has an optimum fermentation temperature for H2S production.

• Journal of Animal Science and Technology
• /
• v.62 no.2
• /
• pp.227-238
• /
• 2020

Use of raw feedstuffs for livestock is limited by low digestibility. Recently, fermentation of feedstuffs has been highlighted as a new way to improve nutrient absorption through the production of organic acids using inoculated microorganisms, which can also play a probiotic role. However, standard procedures for feedstuff fermentation have not been clearly defined because the process is influenced by climatic variation, and an analytical standard for fermented feedstuffs is lacking. This study aimed to evaluate the microbiological and biochemical changes of feedstuffs during fermentation at temperatures corresponding to different seasons (10℃, 20℃, 30℃, and 40℃). We also investigated the effects of yeast, lactic acid bacteria (LAB), and Bacillus spp. on fermentation and determined the results of their interactions during fermentation. The viable cells were observed within 8 days in single-strain fermentation. However, when feedstuffs were inoculated with a culture of mixed strains, LAB were predominant at low temperatures (10℃ and 20℃), while Bacillus spp. was predominant at high temperatures (30℃ and 40℃). A significant drop in pH from 6.5 to 4.3 was observed when LAB was the dominant strain in the culture, which correlated with the concentrations of lactic acid. Slight ethanol production was detected above 20℃ regardless of the incubation temperature, suggesting active metabolism of yeast, despite this organism making up a marginal portion of the microbes in the mixed culture. These results suggested that fermentation temperature significantly affects microbiological profiles and biochemical parameters, such as pH and the lactic acid concentration, of fermented feedstuffs. Our data provide valuable information for the determination of industrial standards for fermented feedstuffs.

• Korean journal of applied entomology
• /
• v.62 no.3
• /
• pp.183-191
• /
• 2023

After examining the temperature change in berry sawdust during the fermentation period and the developmental characteristics of Protaetia brevitarsis larvae according to the fermentation period, it was found that the fermentation speed was faster than with oak sawdust and a fermentation period of 50-70 days was the most suitable for larval growth. During the fermentation period, the temperature change in sawdust was quickly fermented as berry sawdust passed a high temperature of more than 60℃ in the early stages of fermentation compared to fermentation speed of oak sawdust, and stabilized within 60 days. In individual breeding, the total growth period of P. brevitarsis larvae by fermentation period was the longest at 104.8 days after fermentation for 30 days, which was a significant difference. There was no difference in the growth period between 50 and 90 days of fermentation. Oak sawdust tended to be the same as berry sawdust, but the larval development period was approximately 30 days. The developmental period by larval stage differed greatly between berries and oak sawdust. The weight of larvae according to the fermentation period of sawdust was the lowest after 90 days of fermentation, with a long fermentation period for both berry and oak sawdust, and there was no difference in the 30-70 days fermentation periods. The survival rate was more than 95% in individual breeding, and there was no difference among the fermentation periods. However, in group breeding, the survival rate was lower than that of individual breeding and was lowest at 90 days of fermentation. In group breeding, the ratio of larvae weighing ≥ 2.5 g, which is the standard for shipment, was 85% after 30-70 days of fermentation of berry sawdust, but was lower at 70% after 90 days of fermentation, which was a significant difference. The survival rate with oak sawdust showed the same trend, which was approximately 10% lower than that with sawdust. In addition, the larvae from the berry sawdust weighed > 2.5 g in 40-60 days, while it took 75-105 days with oak-fermented sawdust.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.4
• /
• pp.443-449
• /
• 1999

Bacillus subtilis BK-17 which produces a novel protease with fibrinolytic activity was isolated from soybean paste. Bioreactor production of the enzyme was studied in order to optimize fermentation conditions such as medium concentration, pH, agitation speed, and temperature. Under most cultural conditions, enzyme production initially began when the cell growth stopped. The onset of the enzyme production was indicated by rapid increase in both dissolved oxygen (DO) and pH. Two- to three-times more concentrated medium than the flask optimum medium yielded higher enzyme production in the bioreactor fermentation. When the medium pH was controlled constant, pH 6.5 exhibited the highest activity in the range of 6.0 to 7.5, but the activity was similar to the case when the pH was initially adjusted to 7.5 and subsequently maintained within a relatively wide range of 6.4 to 7.8. Agitation speed did not affect the enzyme production with an exception of DO reaching zero. Fermentation time was reduced when temperature increased within the range of $25^{\circ}C$ to$37^{\circ}C$. However, the highest activity, along with the slow decrease of the enzymatic activity after reaching the maximum value, was observed at $25^{\circ}C$. By shifting the temperature from $37^{\circ}C$ to $25^{\circ}C$immediately after DO reached the minimum level, the high enzyme production of 1,100 U/ml along with the short fermentation period of 13 h could be obtained.

• Journal of Microbiology and Biotechnology
• /
• v.31 no.9
• /
• pp.1311-1322
• /
• 2021

Microbially induced calcium carbonate precipitation (MICP) has recently become an intelligent and environmentally friendly method for repairing cracks in concrete. To improve on this ability of microbial materials concrete repair, we applied random mutagenesis and optimization of mineralization conditions to improve the quantity and crystal form of microbially precipitated calcium carbonate. Sporosarcina pasteurii ATCC 11859 was used as the starting strain to obtain the mutant with high urease activity by atmospheric and room temperature plasma (ARTP) mutagenesis. Next, we investigated the optimal biomineralization conditions and precipitation crystal form using Plackett-Burman experimental design and response surface methodology (RSM). Biomineralization with 0.73 mol/l calcium chloride, 45 g/l urea, reaction temperature of 45℃, and reaction time of 22 h, significantly increased the amount of precipitated calcium carbonate, which was deposited in the form of calcite crystals. Finally, the repair of concrete using the optimized biomineralization process was evaluated. A comparison of water absorption and adhesion of concrete specimens before and after repairs showed that concrete cracks and surface defects could be efficiently repaired. This study provides a new method to engineer biocementing material for concrete repair.

• Microbiology and Biotechnology Letters
• /
• v.21 no.5
• /
• pp.511-512
• /
• 1993

The production of vinegar containing high acetic acid concentration was carried in a single stage fed-batch culture. The initial and residual ethanol concentration were 50.0g/l and 5.0g/l, respectively, and the ethanol concentration was maintained from 5.0g/l to 10.0g/l during fedbatch culture. The fermentation temperature was decreased by 1C for every increase of 2.0% in acidity. The maximum productivity was 2.53g/l-hr and the acidity was 16.08% after 40 hours of acetic acid fermentation.

• Journal of Microbiology
• /
• v.44 no.3
• /
• pp.276-283
• /
• 2006

The thermophilic fungus Thermoascus aurantiacus 179-5 produced large quantities of a glucosidase which preferentially hydrolyzed maltose over starch. Enzyme production was high in submerged fermentation, with a maximal activity of 30 U/ml after 336 h of fermentation. In solid-state fermentation, the activity of the enzyme was 22 U/ml at 144 h in medium containing wheat bran and 5.8 U/ml at 48 h when cassava pulp was used as the culture medium. The enzyme was specific for maltose, very slowly hydrolyzed starch, dextrins (2-7G) and the synthetic substrate (${\alpha}$-PNPG), and did not hydrolyze sucrose. These properties suggest that the enzyme is a type II ${\alpha}$-glucosidase. The optimum temperature of the enzyme was $70^{\circ}C$. In addition, the enzyme was highly thermostable (100% stability for 10 h at $60^{\circ}C$ and a half-life of 15 min at $80^{\circ}C$), and stable within a wide pH range.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.30 no.5
• /
• pp.301-307
• /
• 2016

The purpose of this study is to research the whitening effects of fermentation extract made from the Rice bran and Dendropanax(FRD) Fermentation conditions were as follows; 1) Dendropanaxand and Rice bran were blended in a ratio of 1 to 1, 2) a weight of sugar was 10% of the total weight, 3) an amount of enzyme was 0.1%, and 4) a temperature was 20℃. It has been fermented for 90 days. In order to observe the whitening effects of FRD, the author measured the cell viability and the inhibition rate of the melanin biosynthesis, the activity of tyrosinase and SOD (superoxide dismutase) in malignant melanoma, B16F10 cells. As a result, FRD significantly inhibited the cell viability of B16F10 in more than 500 ㎍/㎖. FRD significantly suppressed the generation of melanin, and that induced by α-melanocyte stimulating hormone (α-MSH) in more than 1,000 ㎍/㎖. FRD significantly decreased the activity of tyrosinase and that induced by α-melanocyte stimulating hormone (α-MSH) in more than 500 ㎍/㎖. FRD did not changed the activity of SOD in dose dependent manner. Therefore, the author considered that the fermentation extract made from a Rice bran and Dendropanax will be able to produce high value-added products, if used as a commercial. Therefore, the author considered that the fermentation extract made from a Rice bran and Dendropanax will be able to produce high value-added products, if used as a commercial.

• Journal of the Korean Society of Food Culture
• /
• v.11 no.5
• /
• pp.711-719
• /
• 1996

Fermentation characteristics of kwahaju (a typical Korean traditional alcoholic beverage) base were investigated during fermentation with different contents of nuruk (Korean-style bran koji) extract. The nuruk extract which was prepared by incubating the mixture of nuruk powder and water at $25^{\circ}C$ overnight and by filtering it was used to be 0.6%, 2.7%, 5% and 10% (v/v). Total and reducing sugar contents as well as acidity of the kwahaju base with 0.6% nuruk extract were higher than those with 2.7%, 5% and 10% at the fermentation end. Final pH values of all the base samples were ranged from 3.3 to 4.1. Alcohol concentrations of the base samples with 2.7%, 5% and 10% nuruk extract were higher than those with 0.6%. Microbial growth rate was great and inner temperature was high in the sample with high content of nuruk extract, but fermentation period was short. Total sugar consumption and alcohol production increased as the content of nuruk extract increased, but total acid production decreased. The base sample with 10% nuruk extract showed the most excellent fermentation efficiency. Fusel oil content of the base sample with 2.7% nuruk extract was the highest (457.3 ppm), and those wity 5% and 10% nuruk extract were 438.9 ppm and 442.6 ppm, respectively. The sample with 0.6% nuruk extract had the lowest content (409.5 ppm). Sensory evaluation of both the kwahaju base and kwahaju mix with 25% and 40% alcohol by adding soju (Korean distilled liquor) showed that the base with 2.7% nuruk extract had the highest score, and that the kwahaju mix with 25% alcohol had higher score than that with 40%. The sensory results on overall desirability were consistent to those on color and alcohol concentration, and it turned out that the two factors were important to make kwahaju.