• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.465-468
• /
• 2000

The procedure of semi-solid forming is composed of heating a billet, forming, compression holding and ejecting step. There are several methods to heat a billet during semi-solid forming process such as electric heating and induction heating. Usually in semi-solid forming process, induction heating has been adopted to achieve more uniform temperature of semi-solid material. Although induction heating is better method than any others, however, there is still difference of temperature between internal part and surface part of semi-solid material. Worse yet, in case of high liquid fraction of semi-solid material, liquid of the billet will flow down though solid of the billet still remains, which is very difficult to handle. In the present study, induction heating of semi-solid material with compulsive surface cooling has been performed to obtain uniform distribution of temperature. Distribution of temperature of the billets was measured and compared with that of conventional distribution of temperature. By this new induction heating method, not only temperature over the whole billet become uniform, but also control of temperature is possible.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.157-157
• /
• 2011

Graphene has generated significant interest in the recent years as a functional material for electronics, sensing, and energy applications due to its unique electrical, optical, and mechanical properties. Much of the considerable interest in graphene stems from results obtained for samples mechanically exfoliated from graphite. Practical applications, however, require reliable and well-controlled methods for fabrication of large area graphene films. Recently high quality graphene layers were fabricated using chemical vapor deposition (CVD) on nickel and copper with methane as the source of the carbon atoms. Here, we report a simple and efficient method to synthesize graphene layers using solid carbon source. Few-layer graphene films are grown using filtered vacuum arc source (FVAS) technique by evaporation of carbon atom on Ni catalytic metal and subsequent annealing of the samples at 800$^{\circ}$C. In our system, carbon atoms diffuse into the Ni metal layer at elevated temperatures followed by their segregation as graphene on the free surface during the cooling down step as the solubility of carbon in the metal decrease. For a given annealing condition and cooling rate, the number of graphene layers is easily controlled by changing the thickness of the initially evaporated amorphous carbon film. Based on the Raman analysis, the quality of graphene is comparable to other synthesis methods found in the literature, such as CVD and chemical methods.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.16 no.2
• /
• pp.3410-3419
• /
• 1974

The purpose of this study is to find out the correlation between pumping rates and influential factors in the tube wells for irrigation through the analysis of various statistical data of the existing tube wells for irrigation and pumping tests. Statistical data of the existing tube wells for irrigation were collected from the authorities concerned, and pumping tests were carried out for twelve tube wells. The results of this study are summarized as follows: 1. The drilled tube wells are the most useful among various tube wells in securing pumping rates. 2. The enlargement of well diameter or the improvement of pumping equipments is necessary in drilled tube wells with pumping rates more than 806 ㎥/day, and the adjustment of foot valves or the special control of pumping equipments is necessary in tube wells with pumping rates less than 300 ㎥/day. 3. The choking of aquifer and slits can be prevented by removing earth and sand piled in tube wells. 4. The increase of well loss and the destruction of aquifer can be prevented by determining the optimum pumping rates through the step draw down tests. 5. The thickness of gravel packing is rather thin in drilled tube tube wells. 6. High pamping rates can be gained by deepening the depth of tube wells in the place the ground water storage is abundant, the thickness of aquifer is thick. and the depth of tube wells is deep. 7. Higher pumping rates can be obtained by constructing tube wells in the place where the drawdown is little and the coefficient of transmissibility is large.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.1
• /
• pp.24-29
• /
• 2004

$CF_4$ gas is one of the most useful gases in modern technologies for semiconductor fabrication. However, there are many problems which should be solved in order to fabricate semiconductor device, for example, etching speed drop due to ion charge-up and etching selectivity drop due to the high electron energy. One of useful method in order to suppress their damages above is pulsed-time modulated plasma (PM). However, transient responses of charged particles occur when the source power is turned-on and -off in PM method. To control plasma properties in detail, such a transient phenomenon must be investigated. In this paper, we investigate $CF_4$ RF plasma properties under a one-dimensional fluid model. And also for dynamic and stable control of $CF_4$ plasmas, we investigated the transient behavior of the plasmas after step up or down of the amplitude of the power source voltage $V_s$(t). Fundamental properties of transient $CF_4$ plasmas was discussed. Furthermore, we intend to discuss new method for pulsed-time plasma modulation.

• Toxicological Research
• /
• v.17
• /
• pp.135-138
• /
• 2001

Female Wistar rats were randomly divided into 5 groups: Control, received distilled water; Low lead, received 0.5 g/ιlead (as acetate) in drinking water; High lead, received 2.0 g/ιlead; Low lead + Minerals, received 0.5 g/ιlead in drinking water and received minerals (Ca$^{2+}$, 25 mg/kg/day; Fe$^{3+}$, 0.47 mg/ kg/day; Zn$^{2+}$, 0.33 mg/kg/day; Se, 0.83 $\mu\textrm{g}$/kg/day) by gavage; High lead + Minerals, received 2.0 g/ιlead and received the same minerals. Animals exposure to lead was from 10 days before mating till postnatal day 21; and the minerals was administered from the first day of pregnancy and during lactation. No statistical difference was found either in body weights or in blood lead levels between the pups received minerals and those only exposed to lead at the same dose. The developmental and behavioral teratological effects of lead on pups, such as time-lag of eye opening, pinna detachment, fur developing, incisor eruption, ear unfolding, and surface righting were observed in this study; and the minerals decreased the toxicity of lead either in low or in high lead exposure pups. The numbers of step-down were significantly increased in lead exposed animals, and the effect of intervention by the minerals was appeared only in the pups exposed to low lead. The ChAT activity and levels of glutamate and aspartate in hippocampus decreased in treated animals compared to control animals, no effect of intervention by the minerals was found. The results of this study indicate that the applied multi-minerals can alter the outcome of develop-mental lead poisoning in rats.s.s.s.

• Journal of the Korean Society for Railway
• /
• v.20 no.3
• /
• pp.329-338
• /
• 2017

A recent trend of technical development in auxiliary-power-supplies (APS) is to replace 60Hz low frequency transformers with isolated type dc/dc converters. This paper introduces the technical trend in APS structures and proposes a power converter circuit suitable for high-efficient and light-weight APS. By utilizing the resonant converter, which achieves ZCS, to reduce switching losses, various types of APS structures (1-stage and 2-stage) are reviewed, and they are verified by simulation. The full-bridge resonant LLC converter is designed with a 1-stage power converting structure; the resonant converter topology is designed with a 2-stage power converting structure that has a pre-regulator converter to compensate for the wide input voltage range. Both a step-down converter and a step-up converter are designed and compared for the pre-regulator in the 2-stage structure. Operational characteristics are compared with simulation results and loss analyses are presented to proposes appropriate system structure and topologies.

• Journal of muscle and joint health
• /
• v.1 no.1
• /
• pp.97-115
• /
• 1994

The purpose of this study was to examine the reliability and validity of the observed behaviors of subjects who suffered from low back pain with spinal diseases, Thirty two low back pain patients admitted on the neurosurgical unit in an army hospital were compared with 30 normal controls belonged to an army unit, by means of matching the age, hight and weight. Observed pain behaviors were developed by the researcher on the bases of literature and patient observation. This tool consists of 18 behaviors seperated into two major groups : mutually exclusive and concomittent behaviors. The mutually exclusive behaviors included coding cathegories for 6. body motions assumed by the subjects during the observation session. These 6 standardized motions consisted of sitting from standing first, and serially tying down, reclining, sitting again, and then standing, 6 steps walking. Concomittent behaviors consisted of 12 observable patterns that can be observed systematically from the face, grimacing, bracing, rubbing, walking with arms fixed, support with hands on sitting or standing, guarded movement, limping, unbalaced weightbearing, stopped movement from tying position to sitting, sighing and graoning. Subjects were videotrecorded as they performed a 6-standardized sequence of motions, simultanously researcher measured the time spent performing each motion and step length. Patients were asked torate their subjective pain score on the 10 mm graphic rating scale ranging from 'no pain' to 'sever pain'. For scoring of the pain behaviors, two trained nursing officiers independently and simutanously viewwd each videorecording and checked subject 'pain behaviors at the observational item checklist. The result of the study are summarized as follows : 1. Reability of the observational tool was a=.845. 2. Spearman's rho and percentage agreement were p=.97 and 81.7 persent respectively, that indicate adequate interrater reability of this tool. 3. The sensitivity rate of the tool was .875 while specificity rate .866 for differentiating patient from the normal. 4. When difference in the objective pain indices between patient group and control were compared, there was significant difference of all indices, such as pain behavior(t=7.71, p=.0001). spent time performing motion(t=14.2, p=.0001), step length (t=-10.72, p=.0001). 5. There were differences in the objective indices the subjective pain subgroups (low, medium, high). Differences in the mean score of objective pain behavior (F=6.376. p=.005) and spent time for moyion(F=4.631, p=.018). But there were no significant differences in the step length among the subgroups(F=.667, p=.521). 6. Highly correlated pain behavior items wiyh subjective pain score were 'stopped movement from lying position to sitting', 'limping', 'support with hands on sitting or standing', 'bracing', 'guarding' and 'walking with arms fixed'. In summary, although some of rho behavior items such as sighing and groaning in this study could not be observed because of videotaped datd, the reliability and validity of the over all observation method were satifactory. Thus, the results of the present study demonstrate rye potetional utility of the tool in assessing objective pain complementing self-reported pain in low back pain patients.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.649-652
• /
• 2005

The camera cellular phone has a large portion of cellular phone market in recent year. The variety of a customer demand makes a fast model change and the spatial resolution is changed from VGA to multi-mega pixel. The 1.3 mega pixel (MP) camera cellular phone was first released into the Korean market in October 2003. The major cellular phone companies released a 2MP camera cellular phone that supports zoom function and a 2MP camera cellular phone is settled down with the Korea cellular phone market. It makes a keen competition in price and demands automation for phone camera module. There is an increasing requirement for the automatic assembly to correspond to a fast model change. The hard automation techniques that rely on dedicated manufacturing system are too inflexible to meet this requirement. Therefore in this study, this system is designed with the flexibility concept in order to cope with phone camera module change. The system has a same platform that has X-Y-Z motion or X-Z motion with ${\mu}m$order accuracy. It has a special gripper according to the type of a component to be put together. If the camera model changes, the gripper may be updated to fit for the camera module. The controller of this system acquires the data sets that have the information about the assembly part by the tray. This information is obtained ahead of an inspection step. The controller excludes an inferior part to be assembled by using this information to diminish the inferior goods. The assembly jig used in this system has a function of self adjustment that reduces the tact time and also diminish the inferior goods. Finally, the intelligent assembly system for phone camera module will be designed to get a flexibility to meet model change and a high productivity with a high reliability.

• Journal of Power Electronics
• /
• v.15 no.2
• /
• pp.555-566
• /
• 2015

A TRIAC dimming LED driver that can control the brightness of LED arrays for a wide range of source voltage variations is proposed in this paper. Unlike conventional PWM LED drivers, the proposed LED driver adopts a TRIAC switch, which inherently guarantees zero current switching and has been proven to be quite reliable over its long lifetime. Unlike previous TRIAC type LED drivers, the proposed LED driver is composed of an LC input filter and a variable switched capacitance, which is modulated by the TRIAC turn-on timing. Thus, the LED power regulation and dimming control, which are done by a volume resistor in the same way as the conventional TRIAC dimmers, can be simultaneously performed by the TRIAC control circuit. Because the proposed LED driver has high efficiency and a long lifetime with a high power factor (PF) and low total harmonic distortion (THD) characteristics, it is quite adequate for industrial lighting applications such as streets, factories, parking garages, and emergency stairs. A simple step-down capacitive power supply circuit composed of passive components only is also proposed, which is quite useful for providing DC power from an AC source without a bulky and heavy transformer. A prototype 60 W LED driver was implemented by the proposed design procedure and verified by simulation and experimental results, where the efficiency, PF, and THD are 92%, 0.94, and 6.3%, respectively. The LED power variation is well mitigated to below ${\pm}2%$ for 190 V < $V_s$ < 250 V by using the proposed simple control circuit.

• Asia-Pacific Journal of Business
• /
• v.11 no.3
• /
• pp.243-260
• /
• 2020

Purpose - This paper aims to investigate the properties of crude oil based derivative security (DLS) focusing on step-down type for comprehensive understanding of its risk. Design/methodology/approach - Kernel estimation is conducted to figure out statistical feature of the process of oil price. We simulate oil price paths based on kernel estimation results and derive probabilities of hitting the barrier and early redemption. Findings - The amount of issuance for crude oil based DLS is relatively low when base prices are below $40 while it is high when base prices are around $60 or $100, which is not consistent with kernel estimation results showing that oil futures prices tend to revert toward $46.14 and the mean-reverting speed is faster as oil price is lower. The analysis based on simulated oil price paths reveals that probability of early redemption is below 50% for DLS with high base prices and the ratio of the probability of early redemption to the probability of hitting barrier is remarkably low compared to the case for DLS with low base prices, as the chance of early redemption is deferred. Research implications or Originality - Empirical results imply that the level of the base price is a crucial factor of the risk for DLS, thus introducing a time-varying knock-in barrier, which is similar to adjust the base price, merits consideration to enhance protection for DLS investors.