• ETRI Journal
• /
• v.36 no.2
• /
• pp.253-263
• /
• 2014

In the near future, traditional narrow and fixed viewpoint video services will be replaced by high-quality panorama video services. This paper proposes a visual-attention-aware progressive region of interest (RoI) trick mode streaming service (VA-PRTS) that prioritizes video data to transmit according to the visual attention and transmits prioritized video data progressively. VA-PRTS enables the receiver to speed up the time to display without degrading the perceptual quality. For the proposed VA-PRTS, this paper defines a cutoff visual attention metric algorithm to determine the quality of the encoded video slice based on the capability of visual attention and the progressive streaming method based on the priority of RoI video data. Compared to conventional methods, VA-PRTS increases the bitrate saving by over 57% and decreases the interactive delay by over 66%, while maintaining a level of perceptual video quality. The experiment results show that the proposed VA-PRTS improves the quality of the viewer experience for interactive panoramic video streaming services. The development results show that the VA-PRTS has highly practical real-field feasibility.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.131-132
• /
• 2008

It is necessary to develop a high-speed wireless transmission system, which is able to send medical informations to the emergency medical center during emergency patient transportation. In this research, a system which transmits patient’s vital signs and a real-time audio/video contents of the event has been designed, developed, and the suitability of the system has been verified. Test results indicate that the system is capable of transmitting vital signal data, including 17 numeric data, 12 waveforms and 113 events, reading the affected part by forwarding a $320{\times}240$ pixel image at 2fps. Also, the full-duplex voice transmission of the system at 8bit/64kbps is enough to make stable communication between emergency medical technicians and hospital professionals possible. After numerous hours of driving, the packet loss of patient vital signs is 0.013%.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.12
• /
• pp.277-284
• /
• 2012

In this paper, we analyzed various noise in the video stream system that have largely influence on EMI noise. We presented the remedy for these various noises and then designed the wireless video streaming system for a vehicle. To minimize EMI noise, we derived the improvement of noise characteristic from impedance matching, new design of the inner layer of the PCB line design and new design of high-speed data Interfaces. As a result, the final system showed 40[dBuV/m] and 47[dBuV/m] dB in the each regulation band.

• Journal of Broadcast Engineering
• /
• v.16 no.2
• /
• pp.258-273
• /
• 2011

This paper designs and implements a multi-view 3D video player system which is operated faster than existing video player systems. The structure for obtaining the near optimum speed in a multi-processor environment by parallelizing the component modules is proposed to process large volumes of multi-view image data at high speed. In order to use the concurrency of bottleneck, we designed image decoding, synthesis and rendering modules in a pipeline structure. For load balancing, the decoder module is divided into the unit of viewpoint, and the image synthesis module is geometrically divided based on synthesized images. As a result of this experiment, multi-view images were correctly synthesized and the 3D sense could be felt when watching the images on the multi-view autostereoscopic display. The proposed application processing structure could be used to process large volumes of multi-view image data at high speed, using the multi-processors to their maximum capacity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.11
• /
• pp.2498-2511
• /
• 1997

Due to the recent advances in computer technologies and high-speed networks, telecommunication services and provision of multimedia services will be considered a new software architecture adapting networking infrastructure on information networking architecture. In this paper, the video conference services has been selected as a target service example because it is expected to become one of the most important services on the full service network. In fact, it can be viewed as the basis for providing telecommunication services such as video telephony and video conferencing. This paepr presents the prototyping of TINA(Telecommunication Information Networking Architecture) based desktop video conference system using the concepts of session management. The prototyping of deskop video conference system aims at assessing TINA concepts and refinement of the mapping between session graph and connection graph, and provides support of open service platform towards distribution and objected-orientation.

• Journal of Digital Convergence
• /
• v.10 no.11
• /
• pp.351-358
• /
• 2012

This study is aimed at suggesting optical communication equipment that can deliver high quality video information in high speed, to efficiently handle the flood and water pollution in the river basin. This system is cheaper than existing equipment, and can monitor optical Internet as well as the condition of equipment. Generally, the communication equipment to prevent flood is installed in an unmanned control box and operated by the flood control office situated at the fiver mouth in a long distance section. Therefore, it is hard to promptly cope with communication interruptions, which occur by the cutting or aging of the optical cable. Under the circumstances, this study suggested an efficient system that can deliver high quality video information in high speed (Optical Transmission Convert System) by using optical fiber. The system also solves problems by making use of automatic protection switching (APS) when an accident happens. Its real-time monitoring function gives notice of the problem-occurring points. The system is expected to be widely used in various areas such as intelligent traffic systems.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.3
• /
• pp.282-292
• /
• 2007

The present paper describes the results of high speed photography, acoustic emission (AE) detection and plasma light emission (LE) measurement during $CO_2$ laser welding of 304 stainless steel in different processing conditions. Video images with high spatial and temporal resolution allowed to observe the melt dynamics and keyhole evolution. The existence of keyhole was confirmed by the slag motion on the weld pool. The characteristic frequencies of flow instability and keyhole fluctuations at different welding speed were measured and compared with the results of Fourier analyses of temporal AE and LE spectra. The experimental results were compared with the newly developed numerical model of keyhole dynamics. The model is based on the assumption that the propagation of front part of keyhole into material is due to the melt ejection driven by laser induced surface evaporation. The calculations predict that a high speed melt flow is induced at the front part of keyhole when the sample travel speed exceeds several 10 mm/s. The numerical analysis also shows the hump formation on the front keyhole wall surface. Experimentally observed melt behavior and transformation of the AE and LE spectra with variation of welding speed are qualitatively in good agreement with the model predictions.

• Journal of Industrial Technology
• /
• v.15
• /
• pp.113-122
• /
• 1995

By integrating WDM to OPS unit which plays an important role for the reliability of CPN, we made it possible to provide CATV, VOD, and high-speed data services simultaneously and to meet the requirements for new services in the future. For the design of optimal system, the link analysis of power budget has been performed. Also, the prototyped system has been tested with STM-1 level signals to confirm functions such as transmission, distribution, and protection. The results proved that when occurred out-of-order or recovery of ONU, the system did the pertinent switching with minimum loss for high-speed data services. Also for video distribution services, the system has distributed STM-1 level signals successfully.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.3
• /
• pp.18-27
• /
• 1996

By integrating WDM to OPS unit which plays an improtant role for the reliability of CPN, we made it possible to provide CATV, VOD, and high-speed data services simultaneously and to meet easily the requirements for new services in the future. For the design of optimal system, the link analysis of power budget has been perfomred. Also, the prototyped system has been tested with STM-1 level signals to confirm functions such as transmission, distribution, and protection. The results proved that when occurred out-of-order or recovery of ONU, the system did the pertinent switching with minimum loss for high-speed data services. Also for video distribution services, the system has distributed STM-1 level signals sucessfully.

• Journal of Korea Multimedia Society
• /
• v.18 no.9
• /
• pp.1047-1057
• /
• 2015

In this paper, we propose an effective wireless transmission technology, under poor wireless transmission channel surroundings caused by speedy flying, that are able to transmit high quality video recording information and surveillance data via accessing to various wireless networking services architecture such as One-on-One, Many-on-One, One-on-Many, Over the Horizon. The Real-Time Position Analysis(RAPA) method is also suggested to provide more meaningful video information of shooting area. The suggested wireless transmission technology and RAPA can make remote control of UAV's flight route to get valuable topography information. Because of the benefit to get both of video information and GPS data of shooting area simultaneously, the result of study can be applied to various application sphere including UAV that requires high speed wireless transmission.