• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.889-896
• /
• 2005

While a year and a half has been passed since the launch of KTX service, traffic volume of Gyung-bu High Speed Railway is still much lower than the forecasted value. This situation has been badly affecting not only Korail's financial status but also KRNA's general railway construction projects as general public responds negatively to such projects as New Ho-nam Line Construction. This paper outlines traffic volume forecasting methodologies applied to construction of Gyung-bu High Speed Railway, identifies major causes of forecasting deviations. and finally extracts problems through comparison between the forecasted results and actual traffic volume.

• 한국철도학회논문집
• /
• 제15권1호
• /
• pp.23-28
• /
• 2012

본 논문에서는 고속 철도 차량의 주행 속도 150~300km/h에서 발생하는 음압을 마이크로폰을 이용하여 측정하고, 주행 속도의 증가에 따라 발생하는 음압의 특성을 분석하였다. 분석된 결과를 통해서 고속철도 차량의 속도 증가와 음압의 관계식을 도출하였으며, 주파수 영역에서 속도 증가에 따른 음압의 증가 특성을 검토하였다. 또한 주행소음 분석을 통해서 고속철도 차량의 주요 소음 발생 위치를 추정하였으며, 마이크로폰 어레이를 활용한 소음지도 분석을 통해서 고속철도 차량의 소음원의 위치를 도출하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.450-453
• /
• 2005

We test the running performance of KHST(Korean High Speed Train) that is developed in Korea. The interior noise of high speed train is dependent on the train speed generally and is one of the most important problem recently. In this paper, we present the test results of interior noise for KTX and KHST and examine into the cause of interior noise for KTX. From the analysis results, we know that the interior noise of KHST is lower about $2{\sim}5dB(A)$ than KTX and also the noise levels of KTX at 80Hz and 250Hz in tunnel increase very highly.

• 한국철도학회논문집
• /
• 제11권4호
• /
• pp.417-423
• /
• 2008

교통계획을 수립하는 계획가들은 그동안 출퇴근 교통수단의 전환을 촉진하는 정책적 노력을 지속적으로 추진해왔다. 본 논문은 경부축 고속철도 등장이후 지역간 통행체계의 변화된 통근행태를 분석해보고자 하였다. 연구에 사용된 데이터는 코레일의 2004년$\sim$2008년 간의 자료이다. KTX 정기권 이용자의 등장으로 인해 그동안의 정성적인 추정이 아닌 계량적인 분석을 통해 통근권 변화에 대해서 거리대, 시간대, 운임수준 및 기종점 통행패턴에 대해 분석하였으며, KTX로 인해 통근거리는 길어졌지만 통행시간 감소로 인한 편익을 인식하게 되면서 정기권 이용자의 통근권역이 확장되었음을 나타낸다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.1040-1045
• /
• 2004

A study has been performed to investigate on the dynamic behavior of bridges crossed by the KTX(Korea Train eXpress). The investigated bridge is a 2-span continuous concrete box bridge with spans of 40m length named Yeon-Jae bridge. We have performed many field tests on the dynamic behaviors of a real bridge for KTX using various sensors. For this study, various sensors have been installed on the Yeon-Jae bridge located in the experimental section of the KHSR(Korea High-Speed Railway) track and tests have been performed. Through this study, it is known that effects of local modes and sleepers in the box-girder bridge for the KTX on the dynamic responses is remarkable. Therefore, in the investigation on the accelerations of the box-girder bridge, three dimensional model should be adopted in numerical analysis including the effects of sleepers. The effect of temperature on the accelerations of the bridge should be investigated in the further studies to determine the reason of excessive acceleration.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.511-518
• /
• 2000

The high speed train service will be offered for high-quality transport service in existing railway by Korean National Railroad(KNR). Therefore, this paper presents the results of analysis carried out to determine the dynamic response characteristics of deck plate girder bridges which are representative elevated structures of existing railway and to evaluate their suitabilities for supporting Korea Train Express(KTX) trainsets in the speed range 0-250 km/h. Their dynamic characteristics are analyzed concerning structural safety, train-operation safety and passenger comfort. The simplified method for 2-dimensional train/track/bridge interaction analysis is utilized in the analysis of dynamic behaviors of deck plate girder bridges.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(I)
• /
• pp.131-137
• /
• 2003

In this paper, we introduce the characteristics of ride comfort for KTX(Korea Train express) and HSR 350(Korea High Speed Train project). The concept of term "ride comfort" is equivocal. Generally it is defined as the vehicle vibration. There are many studies on evaluation method of ride comfort for railway. In the case of KTX, the ride comfort has been evaluated according to ISO 2631 standard. But the ride comfort for HSR 350 has been assessed by UIC 513R. We have reviewed the ride comfort for KTX and HSR 350 by same method, such as ISO 2631 and UIC 513R, and compared the result of KTX with that of HSR 350.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1118-1123
• /
• 2011

The introduction of high speed railway(KTX) in Korea after the Korean high speed train through the KTX-II of the development is being run is made. Thus the demand for the railway technology advances and high performance, Korean government promoted the development of the next-generation high speed train system(HEMU-400X). In addition to the production of train system essential element of the train through an on-line test is to evaluate the performance. Through the on-line test of the train in order to evaluate the performance test items should be selected first and need to the test procedures are required. In addition, an Overall Measuring System(OMS) to measure the performance of the train system should be established. In this study for the on-line test of the HEMU-400X test items was selected for detailed measurements and performance evaluation of a comprehensive and efficient trains to test an OMS for the development are discussed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1139-1163
• /
• 2009

Since opening of the high speed railroad in Korea, service result of the last 5 years is commandable. About 236million passengers had taken KTX until February 2009, and number of trains in service per day during week-end increased from 128 to 181, meaning that it's grown about 40%. And MKBSF, one of indicators of the high speed railroad's reliability, registered 680,469Km at the end of the year 2008, witch is 6 times more than 121,000Km, contract base when KTX was introduced. With increasing number of trains in service, not only passengers use the high speed railroad more frequently, but also we assure its reliability through maintenance based on reliability. And actually we gather information concerning all kind of defects occurred during train circulation and then, analyse them, and eradicate their causes in order to improve the high speed railroad's reliability. This paper describes a verification test process to analyse causes of defective function about train's traction.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.378-382
• /
• 2005

The opening of high speed railway upgraded our land transportation speed limit, causing lots of changes including living and culture and also paving the way for stepping up the railway technology. However, it is also true that we had a limit to adopt the existing railway system structured for 150km/h to the new structure requiring a higher speed of approximate 300km/h due to technological, based on the time and experience. More importantly, heading toward a step of operating such a high speed railway system, it has been practically and quickly proposed that the railway needs high speed railway engineering, maintenance technology of parts of the vehicles to have a stable maintenance foundation and localization of major parts. Therefore, this study was intended to research the actual displacement characteristics in runningg on an actual track for the purpose of developing the protective and maintenance technology of springs and dampers, which are core parts among suspension elements of a high speed railway vehicle. For this, it was researched the actual vehicle test and its interpretation centered on primary spring, which is used for the suspension system of a bogie, body-body dampers and body-bogie yaw damper. Also, to analyze the displacement characteristics of suspension system in the actual conditions of high speed railway vehicles, a vehicle‘s dynamic characteristics was analyzed and interpreted. At the same time, a tester for measuring the actual displacement of such suspension elements was designed and attached to actual vehicles, to measure the displacements that occur in running it on the Seoul-Busan line, one of major lines serviced by KTX. The displacement data gained from the test with actual vehicles was analyzed for its displacement distribution depending on the service sections and frequency, with which the valuable data necessary for any potential breakdown or maintenance in the future could be obtained.