• 제목/요약/키워드: high speed mode

검색결과 1,016건 처리시간 0.022초

차량하중에 의한 사장교의 동적거동에 관한 연구 (A Study on Dynamic Behaviour of Cable-Stayed Bridge by Vehicle Load)

  • 박춘혁;한재익
    • 대한토목학회논문집
    • /
    • 제14권6호
    • /
    • pp.1299-1308
    • /
    • 1994
  • 본 연구는 사장교의 차량하중에 의한 동적거동을 파악하고자 수치해석상 비교적 간단한 일본의 풍리(豊里)(Toyosato)대교(大橋)의 자료를 근거로하여 수치해석 대상모델을 구조형식별로, 여러가지 설계변수-즉, (1) 경간비, (2) 중앙경간장과 주탑높이와의 비, (3) 거어더의 강성, (4) 주탑의 강성, (5) 케이블의 강성-을 변화시켜 수치해석을 수행하여 동적거동을 파악하고, 그 결과를 가지고 설계변수의 영향 및 충격계수의 변화에 대하여 비교 분석하였다. 이때 변위 및 단면력의 영향선을 구하기 위한 해석은 전달행렬법을 이용하였으며, 동적해석에 있어서는 평면구조계의 집중질량계로 모델을 가정하여 차량과 교량의 운동방정식을 유도한 후 모드중첩법을 사용하여 각 질점에 대한 변위 및 단면력의 동적시간이력을 구하였다.

  • PDF

PFC 컨버터와 DTC를 이용한 BLDC 모터의 구동 시스템 구현 (Implementation of the BLDC Motor Drive System using PFC converter and DTC)

  • 양오
    • 전자공학회논문지SC
    • /
    • 제44권5호
    • /
    • pp.62-70
    • /
    • 2007
  • 본 논문에서는 일정 토크영역에서 승압형 PFC 컨버터와 직접토크제어(DTC) 방법을 사용하여 BLDC 모터의 구동 시스템을 DSP(TMS320F2812)로 구현하였다. 기존의 6단계 PWM 전류제어와 달리 미리 정한 샘플시간 마다 간단한 look-up 표로부터 2상 도통 모드에 대한 인버터의 전압 상태 벡터를 설정함으로써 원하는 전류파형을 만들었으며 이로부터 기존의 전류제어기보다 훨씬 빠른 토크 응답특성을 얻을 수 있었다. 또한 BLDC 모터의 비 이상적인 사다리형 역기전력에 의해 발생되는 저주파 토크변동을 저감하기 위하여 위치 loop-up 표를 사용하였다. 아울러 역률을 보정하기 위해 승압형 PFC 컨버터를 구성하였고 이 때 전파 정류된 입력전압과 출력전압, 인덕터의 전류에 의해 평균전류모드 제어 방식으로 80 kHz마다 PWM 듀티(duty)가 조절 되도록 하였다. 이와 같이 복잡한 제어 알고리즘은 초고속 DSP의 출현으로 PFC와 DTC 알고리즘이 동시에 제어가 가능하며, 본 논문에서는 DTC 알고리즘을 구현할 때 DSP의 일반 범용의 출력포트를 사용하여 구현하였고 단지 PFC에서만 1개의 PWM을 사용하여 디지털 제어기를 구현하였다. 실험을 통해 DTC 알고리즘과 PFC 컨버터를 이용한 BLDC 모터 구동 시스템의 타당성과 효용성을 보였고, 실험결과로부터 PFC 컨버터를 사용하지 않았을 때는 역률이 약 0.77이었으나 PFC 컨버터를 사용하였을 때는 부하변동에 관계없이 약 0.9997로 크게 향상됨을 확인하였다.

DCT-기반 영상/비디오 보안을 위한 암호화 기법 및 하드웨어 구현 (Ciphering Scheme and Hardware Implementation for MPEG-based Image/Video Security)

  • 박성호;최현준;서영호;김동욱
    • 대한전자공학회논문지SP
    • /
    • 제42권2호
    • /
    • pp.27-36
    • /
    • 2005
  • 년 논문에서는 MPEG과 JPEG, H.26X 계열 등의 DCT-기반 영상/비디오 컨텐츠에 효과적인 암호화 방법을 제안하였고, 이를 최적화된 하드웨어로 구현하여 고속동작이 가능하도록 하였다. 영상/비디오의 압축, 복원 및 암호화로 인한 많은 연산량을 고려하여 영상의 중요한 정보(DC 및 DPCM계수)만을 암호화 대상 데이터로 선정하여 부분 암호화를 수행하였다. 그 결과 암호화에 소요되는 비용은 원 영상 전체를 암호화하는 비용이 감소하였다. 여기서 Nf는 GOP내의 프레임수이고 PI는 B와 P 프레임에 존재하는 인트라 매크로블록의 수이다. 암호화 알고리즘으로는 다중모드 AES, DES, 그리고 SEED를 선택적으로 사용할 수 있도록 하였다. 제안한 암호화 방법은 C++로 구현한 소프트웨어와 TM-5를 사용하여 약 1,000개의 영상을 대상으로 실험하였다 그 결과 부분 암호화된 영상으로부터 원 영상을 추측할 수 없어 암호화 효과가 충분함을 확인하였으며, 이 때 암호화에 의한 압축률 감소율은 $1.6\%$에 불과하였다. Verilog-HDL로 구현한 하드웨어 암호화 시스템은 하이닉스 $0.25{\mu}m$ CMOS 팬텀-셀 라이브러리를 사용하여 SynopsysTM의 디자인 컴파일러로 합성함으로써 게이트-수준 회로를 구하였다. 타이밍 시뮬레이션은 CadenceTM의 Verilog-XL을 이용해서 수행한 결과 100MHz 이상의 동자 주파수에서 안정적으로 동작함을 확인하였다. 따라서 제안된 암호화 방법 및 구현된 하드웨어는 현재 중요한 문제로 대두되고 있는 종단간(end-to-end) 보안에 대한 좋은 해결책으로 유용하게 사용될 수 있으리라 기대된다.

가변블록 기반 저복잡도 H.264/AVC 디블록킹 필터 (Low-Complexity H.264/AVC Deblocking Filter based on Variable Block Sizes)

  • 신승호;도남금;김태용
    • 대한전자공학회논문지SP
    • /
    • 제45권4호
    • /
    • pp.41-49
    • /
    • 2008
  • H.264/AVC는 기존 압축기술 대비 가변 블록 움직임 보상, 복수 참조 영상, 1/4 화소 움직임 벡터 정확도 및 인-루프 디블록킹 필터 (In-loop Deblocking Filter) 등을 지원하고 있다. 이런 부호화 기술은 압축 효율 향상의 주된 기능이면서, 동시에 높은 복잡도의 요인으로 작용하고 있다. 저사양, 저비트율의 단말기에서 H.264 부호화 기술의 실제 응용 확대를 위해서는 속도향상 개선이 필수적이다. 동영상의 주관적 화질을 상당부분 개선할 수 있는 디블록킹 필터 (Deblocking Filter)는 현재 복잡도와 높은 계산량으로 인하여 저사양 단말기에서는 제한적으로 사용되고 있다. 본 논문에서는 실시간 저비트율의 디지털 동영상압축 시 발생하는 블록킹 현상을 효율적으로 제거하는 디블록킹 필터의 성능개선 방법을 제안한다. 본 논문에서 제안하는 디블록킹 필터링 방법은 움직임 보상에서의 가변블록 정보를 이용하여 영상의 공간적 상관관계를 추출하고, 그 특성에 맞게 4가지 필터모드(Filter Mode)로 분리하여 분리된 영역에 적응형 필터 구조를 취한다. 적용된 모드별 필터링은 블록킹 현상을 제거함은 물론 과도한 블러링 현상(Blurring Effects)을 방지하고 영상내의 세밀한 영상 성분들과 블록 경계간의 실제 에지를 보호함과 동시에 기존 방법 대비 $30{\sim}40%$의 성능향상의 개선을 이루었다.

확장한 진공용기 내부의 압력구배 측정 (Extending the Pressure Limit for Turbomolecular Pump up to 133 Pa by using Conductance-Reducer and Measuring the Pressure Differences in Vacuum Chamber)

  • 홍승수;와킬 칸;강상우;윤주영;신용현
    • 한국진공학회지
    • /
    • 제19권1호
    • /
    • pp.1-9
    • /
    • 2010
  • 진공게이지의 비교교정 방법으로 교정이 가능하고-비교교정은, 2차표준기라고 부르는 교정되어진 게이지와 교정할 다른 게이지의 지시값을 읽어 비교는 방법- 다른 진공관련 실험을 할 수 있는 기체 유량 시스템을 개발하였다. 교정시스템에의 진공용기는 터보분자펌프(TMP)에 의해서 배기하고, 후면에 스크롤펌프를 배치하여 배기시스템을 꾸몄다. 터보분자펌프의 최대허용가능 압력은 펌프의 주입구에서 0.1 Pa까지이며, 이보다 압력이 높아지면 배기속도가 감소하며 압력대 이하의 환경을 조절하기가 매우 어렵게 된다. 현재 133 Pa까지의 높은 압력을 발생시킬 수 있는 새롭게 개발된 기체유량조절시스템은 바이패스 라인에 맞도록 설계된 컨덕턴스-리듀서를 설치하여 터보분자펌프를 안전하게 운용할 수 있도록 하였다. 추가로 진공용기안에 전체압력 범위(0.1 Pa ~ 133 Pa)의 압력을 생성하며 기체 주입과 압력구배를 연구하였다. 압력의 최대 편차는 용기의 위쪽 방향에 위치한 가스 주입구에서 가까운 위치 C에서 1.6%로 나타났다.

다중 이동 객체의 실시간 인식 및 추적 시스템 (Real-time Recognition and Tracking System of Multiple Moving Objects)

  • 박호식;배철수
    • 한국통신학회논문지
    • /
    • 제36권7C호
    • /
    • pp.421-427
    • /
    • 2011
  • 실시간 객체 인식 및 추적은 컴퓨터 비전 응용 산업이 발달하면서 그 중요성이 더해지고 있다. 객체 추적을 위해 많이 이용되고 있는 알고리즘으로 Mean-Shift 알고리즘이 있다. Mean-Shift 알고리즘을 기반으로 한 객체 추적 알고리즘은 구현이 간단하고, 적은 계산 복잡도를 갖는 장점이 있다. 따라서 실시간 객체 추적 시스템에 적합하다고 할 수 있지만, 지역 모드로의 수렴만을 보장하는 특성으로 인해 객체의 수가 많은 경우 좋은 성능을 나타내지 못하는 단점을 가지고 있다. 그러므로 본 논문에서는 다중 이동 객체를 실시간으로 추적하기 위한 광류기반의 움직임 추정 기법을 제안한다. 제안된 알고리즘의 성능을 확인하기 위해 다중 이동 객체의 인식 실험 결과 유사도는 0.96으로 기존의 Mean-Shift 알고리즘에 비해 약 13.4% 정도 유사도가 개선되었고 평균 픽셀 오류도 3.07로 또한 50% 이상 감소하였다. 향후 알고리즘을 개선하여 처리 속도를 더욱 줄임으로써 매우 빠른 이동 객체 인식과 상황 인지 알고리즘을 추가한다면 보다 효율적인 인식 및 추적 시스템을 구축할 수 있을 것으로 사료된다.

확장된 상부플랜지 PSC I형 거더교의 동특성 및 동적안정성 분석 (Dynamic Response of PSC I shape girder being used wide upper flange in Railway Bridge)

  • 박종권;장판기;차태권;김찬우;장일영
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제19권4호
    • /
    • pp.125-135
    • /
    • 2015
  • 철도교량의 경제성 확보를 전제로 PSC I형 거더의 장경간화 추세는 근간에 가장 활발히 진행되고 있는 연구이며, 이에 따른 교량의 강성확보를 위한 거더의 효율적인 기하형상 선정은 우선시 되어야할 과제이다. 본 연구에서는 회전반경과 휨효율을 기반으로 확장된 상부플랜지의 거더 단면을 선정하였으며, 본 거더가 적용된 경간장 25m, 30m, 35m, 40m PSC I형 거더교를 대상으로 수치해석을 수행하여 국내 및 국외의 동적성능 기준과의 부합여부를 검증하였다. 또한 경간장 40m PSC I형 거더의 동적성능을 상대적으로 비교하기 위해서 현재 호남고속철도에서 적용된 40m PSC Box 거더교를 대상으로 동적 해석을 수행하였고 KTX열차와 화물열차 주행 시의 동적안정성을 수치해석적으로 검토하여 국내 및 국외의 동적 안정성 기준과 부합여부를 검토하였다. 추가로 표준열차하중과 충격계수를 고려하여 정적해석을 수행하고 한계치와의 부합여부를 분석하였다. 그 결과, 검토대상 PSC I형 거더 철도교는 모든 항목에서 국내 철도교량 관련 정적, 동적안정성 기준치를 만족하는 것으로 분석되었다.

2급(級) 와동(窩洞) 수복시(修復時) 치아파괴(齒牙破壞) 저항성(抵抗性) 및 귀열양상(龜裂樣相)에 관(關)한 연구(硏究) (A STUDY ON THE FRACTURE RESISTANCE AND CHARACTERISTICS OF TEETH IN CLASS II CAVITY RESTORATIONS)

  • 주익남;박상진;민병순;최호영
    • Restorative Dentistry and Endodontics
    • /
    • 제13권2호
    • /
    • pp.337-348
    • /
    • 1988
  • The purpose of this study was to examine the fracture strength and characteristics of teeth with MOD cavity preparation. Freshly extracted sound maxillary premolars were cleaned and stored in normal saline solution $37^{\circ}C$ for 72 hours before experiments. The roots of teeth were embedded in a self-curing resin, and the exposed crown were maintained in a vertical position by a modelling wax in a brass ring. The MOD cavities were prepared with No. 57 carbide bur under high speed to a depth of 2.0mm and a width of 2.0mm(Fig.1). All the prepared teeth specimens were divided into 7 groups according to the mode of cavity form and restorative materials (Table 1, 2): Group I, unpreapred, intact teeth as control Group II, prepared cavity without restoration Group III, prepared teeth restored with amalgam Group IV, prepared teeth restored with composite resin (P-10) Group V, prepared teeth with beveled enamel margins restored with composite resin (P-10) Group VI, prepared teeth restored with light-cured composite resin (P-30) Group VII, prepard teeth with beveled enamel margins restored with light-cured composite resin (P-30) After placement of restorations, all of the specimens were stored in water at $37^{\circ}C$ for 72 hours before testing. All of the specimens were tested on the Instron Universal Testing machine (No. 6025) in order to evaluate the strength of fracture. One metal ball 5.0mm in diameter contacting the specimens parallel to the occlusal surface was used to in this study (Fig. 1). The fracture characteristics of the specimens were examined with naked eye and in the scanning electron microscope (JSM-20). The results obtained from this study were as follows: 1. The mean fracture strength was the highest in group VI and that in group II was the lowest. 2. The progress of crack of teeth propagated into the pulp cavity. 3. In case of the group of the restored teeth, the crack occurred to be accompanied with cuspal fracture. 4. The crack of restored teeth was initiated along the pulpo-axial line angle of the cavity.

  • PDF

섬유의 종류와 조합이 열중합 의치상 레진의 강화에 미치는 영향 (Effect of Fiber Type and Combination on the Reinforcement of Heat Polymerized Denture Base Resin)

  • 유상희;김영임
    • 치위생과학회지
    • /
    • 제10권6호
    • /
    • pp.445-450
    • /
    • 2010
  • 본 연구에서는 열중합 의치상 레진에 유리 섬유, 아라미드 섬유, 폴리에틸렌 섬유를 2.6%, 5.3% 부피비로 첨가하여 섬유의 종류에 따른 강화효과를 평가하고, 각 섬유를 두 가지로 조합한 hybrid FRC를 제작하여 동일 함량의 단독 섬유 FRC보다 굴곡성질이 더 우수한지 평가하고자 하였다. 단독 섬유 FRC에서는 5.3% 부피비의 GL, PE 섬유군의 굴곡강도가 높게 나타났다. 두 가지 섬유 조합FRC의 굴곡강도는 단독 섬유 FRC보다 증가하는 양상을 보였으나, 5.3% GL, PE 섬유군과 유의한 차이가 없었다. 단독 섬유 FRC의 굴곡계수는 5.3% 부피비의 GL 섬유군이 가장 높게 나타났다. 두 가지 섬유 조합FRC의 굴곡계수는 단독 섬유 FRC의 5.3% GL 섬유군보다 높게 나타나 유의한 차이를 보였다. 열중합 의치상 레진의 강화를 위해 섬유를 단독으로 이용할 경우 5.3% 부피비로 첨가한 유리 섬유가 굴곡강도와 굴곡계수 면에서 효과적으로 적용될 수 있을 것으로 본다. 두 가지 섬유 조합FRC의 경우 굴곡강도 면에서는 강화효과가 크지 않았지만, 굴곡계수 면에서 볼 때 유리섬유를 하방에 아라미드 섬유를 그 상방에 위치 시킨 조합을 의치상의 강화에 효과적으로 적용할 수 있을 것으로 본다.

Railway Governance and Power Structure in China

  • Lee, Jinjing
    • International Journal of Railway
    • /
    • 제1권4호
    • /
    • pp.129-133
    • /
    • 2008
  • Over the last $15{\sim}20$years, many countries have adopted policies of railway privatization to keep up with increasing competition from road and air transport. Although each country and case has its own history, market characteristics, political context as well as administrative process, railway privatizations (including railway restructure, concession etc.) in the west usually are accompanied with the establishment of new regulatory regimes. Therefore, railway governance has been innovating towards an interaction of government, regulator, industry bodies, user groups, trade unions and other interested groups within the regulatory framework. However, it is not the case in China. Although China had seen a partial privatization in some branch lines and is experiencing a much larger-scale privatization by establishing joint-ventures to build and operate high-speed passenger lines and implementing an asset-based securitization program, administrative control still occupies absolutely dominant position in the railway governance in China. Ministry of Railway (MOR) acts as the administrator, operator as well as regulator. There is no national policy that clearly positions railway in the transportation network and clarifies the role of government in railway development. There is also little participation from interested groups in the railway policy making, pricing, service standard or safety matter. Railway in China is solely governed by the mere executive agency. Efficiency-focused economic perspective explanation is far from satisfaction. A wider research perspective from political and social regime is of great potential to better explain and solve the problem. In the west, separation and constrains of power had long been established as a fundamental rule. In addition to internal separation of political power(legislation, execution and jurisdiction), rise of corporation in the 19th century and association revolution in the 20th century greatly fostered the growth of economic and social power. Therefore, political, social and economic organizations cooperate and compete with each other, which leads to a balanced and resonable power structure. While in China, political power, mainly party-controlled administrative power has been keeping a dominated position since the time of plan economy. Although the economic reform promoted the growth of economic power of enterprises, it is still not strong enough to compete with political power. Furthermore, under rigid political control, social organizations usually are affiliated to government, independent social power is still too weak to function. So, duo to the limited and slow reform in political and social regime in China, there is an unbalanced power structure within which political power is dominant, economic power expanding while social power still absent. Totally different power structure in China determines the fundamental institutional environment of her railway privatization and governance. It is expected that the exploration of who act behind railway governance and their acting strength (a power theory) will present us a better picture of railway governance as a relevant transportation mode. The paper first examines the railway governance in China and preliminarily establishes a linkage between railway governance and its fundamental institutional environment, i.e. power structure in a specific country. Secondly, the reason why there is no national policy in China is explored in the view of political power. In China, legislative power is more symbolic while party-controlled administrative power dominates political process and plays a fundamental role in Chinese railway governance. And then, in the part three railway finance reform is analyzed in the view of economic power, esp. the relationship of political power and economic power.

  • PDF