• Journal of Ocean Engineering and Technology
• /
• v.11 no.3
• /
• pp.89-94
• /
• 1997

In the design of high speed fishing vessel, its hull form has to be decided from a view point of resistance and propulsion performance without negelction of seakeeping characteristics. In spite of many efforts, the performance improvement by hull form itself has its limitations, specially for high speed craft. In this paper, the development of performance of resistance and seakeeping improving appendage for high speed planing hull on behalft of the hull form of fishing vessel has been introduced. The developed appendage verified its effectiveness in the full scale test.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.41 no.1
• /
• pp.64-69
• /
• 2005

In spite of many efforts, in the design of high speed fishing vessel the sea-keeping performance improvement without neglection of resistance-propulsion performance by hull form itself has its limitations. In this paper, the development of sea-keeping improving appendage pitching and trim improver for high speed planing hull on behalf of the hull form of fishing vessel has been introduced. The developed appendage verified its effectiveness in the full scale test and also has been proved the better resistance performance in the model test and full scale test.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.55 no.4
• /
• pp.356-362
• /
• 2019

We collected AIS information on fishing vessels operating near Jeju Island, and analyzed appearance density of the Chinese fishing vessels and inferred the movements of the fishing grounds. AIS information was received from October 16, 2016 to October 16, 2017 and stored on a hard disk through a program called AisDecoder. Unauthorized fishing vessels within the Exclusive Fisheries Agreement Zone (EFAZ) operated near the EFAZ boundary, and the frequency of appearance of fishing vessels were high in the middle waters of Korea and Japan, 252 and 250 fishing zones. Chinese fishing vessels authorized to enter appeared scattered outside the Prohibiting Fishing Zone of the Large Trawlers (PFZLT), and the closer they were to the PFZLT boundary, the higher the appearance density. And the appearance of Chinese fishing vessels with a speed from 0 to 3 knots was mostly outside the EFAZ, showing high density in the waters close to the boundary between Korea and Japan. On the other hand, within the EFAZ, the frequency of appearance of Chinese fishing vessels was also low and scattered. The appearance of Chinese fishing vessels with a speed from 3 to 5 knots mostly shows some variability within the EFAZ, but the frequency of appearance was high and the density was high. The seasonal appearance of Chinese fishing vessels in the waters south of Jeju Island appeared in the southwest in the autumn and then moved south and southeast of Jeju Island in the winter, and in the spring and summer. They were considered going to other fishing grounds without fishing in the waters south of Jeju Island.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.38 no.4
• /
• pp.289-292
• /
• 2002

In the design of high speed fishing vessel, it's hull form has to be decided from a view point of resistance and propulsion performance without neglection of seakeeping characteristics. In spite of many efforts, the performance improvement by hull form itself has it's limitations, specially for high speed craft. In this paper, a study on the improvement of performance for high speed planing hull type fishing vessel has been introduced.

• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.2
• /
• pp.158-164
• /
• 2011

The study on the improvement of resistance performance is very important for coastal fishing boats in Korea, because the prices of fuel oil are gradually risen and the demand of high-speed fishing boats is increased lately. This study is concerned with the improvement of the resistance performance for Korean high-speed small coastal fishing boats. A semi-planing hull form of Korean small coastal fishing boat is selected in the role of initial hull. From the modification of the hull form parameters and the local characteristics of the hull form, the improvement of the resistance performance is achieved. The resistance performances of the initial and the modified hull forms are estimated by using a numerical simulation method. Also, ship model tests are carried out in ship model basin.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.4
• /
• pp.1-8
• /
• 1995

This paper is presented determination of the hull form factors about a high speed coastal fishing boat using Fuzzy modeling. That is, the estimation curves of total resistance & EHP(Efficiency Horse Power) are induced by Fuzzy modeling algorithm from data of accumulated hull form factors and are compared with the results of model test. Also, the estimation curves of total resistance & EHP are utilized efficiently in determination the hull form factors about a high speed coastal fishing boat.

• Journal of Navigation and Port Research
• /
• v.47 no.4
• /
• pp.202-211
• /
• 2023

In maritime accidents, collisions involving fishing vessels are more frequent and severe than those involving other types of vessels. Previous cases of collision accidents caused by fishing vessels causing serious damage implied that fishing vessels maintained high speeds until just before the collision and that they collided with much larger vessels. This study investigated the correlation between the severity of ship damage resulting from fishing vessel collisions and the vessel's speed. The effective impact speed commonly used in the road transport sector was utilized to analyze ship collision accidents. The study collected collision data between fishing vessels and between fishing vessels and non-fishing vessels from accident investigation reports from 2016 to 2022. The effective impact speed was calculated for a total of 617 vessels. After using binary and multinomial logistic regression methodology, the analysis was carried out with effective impact speed as the independent variable and severity of accident as the dependent variable. The analysis revealed a statistically significant correlation between the effective impact speed and the severity of ship damage, indicating that the severity of ship damage is influenced not only by the effective impact speed but also by the tonnage of the vessel.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.44 no.1
• /
• pp.68-74
• /
• 2008

This study is concerned with the development of the basic planing hull form of small fishing boat in 25 knots high speed. A series of model test to determine the optimum performance hull form of actual fishing boat with 10 gross tonnage was carried out for 5 models made available planing hull form in the circulation water channel. Model test was performed with the resistance test to study the hydrodynamic characteristics of model ships and the sinkage and trim measurement to investigate the stability of model ships and also the wave pattern observation to analyze the effectiveness of model ships. As the result, the planing hull form of P-4 with deep V type bow can be derived as the best hull form with good performance especially in ship's resistance efficiency showing less residual resistance and sinkage and trim and the spray effect, etc..

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.5 no.2
• /
• pp.45-55
• /
• 1999

The majority of fishing vessels(under 20 tonnages) in Korea have a high casualty accident of the flood and capsizing occurred by lack of stability. Actually, it is so difficult to make out the data of inclining and stability tests of small fishing vessels after building, because most of them were built on experiences of manufacturer. According to above reasons, the aim of this study is an attempt to propose a stability criteria of small fishing vessels as follows: Firstly, it is examined that the stability is driven from a transverse metacenter height of actual ships, which is able to obtain a basic drawing and stability data. Secondly, it is examined the heeling at high-speed turning, and the period of rolling according to B/D(breadth/depth). Finally, it is suggested the stability criteria by using a dynamic state which is applied in passenger boat and fishing vessels over 24 meters.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.6
• /
• pp.757-762
• /
• 2010

Korean fishing boats have had appropriate hull forms for the safety, stability and convenience of fishing ability. However, Korean fishermen are recently concerned about the resistance performance and speed of Korean fishing boats, because the prices of fuel oil are gradually risen, also the exhausting of fish resources and the demand of high speed fishing boats are increased. Therefore, the necessity of the study on the improvement of resistance performance for Korean small coastal fishing boats is gradually increased. This study compares the hull form characteristics of Korean fishing boats with those of Japanese fishing boats, and the hull form of a representative Korean fishing boat is modified. From the modification of the hull form parameters for the Korean fishing boat, the improvement of resistance performances is evaluated. Moreover, the increase of resistance performances is also achieved from the modification of local characteristics for the hull form of the Korean fishing boat. A computational method and ship model tests in towing tank are used for the conformations of the improvement of resistance performance.