• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1276-1277
• /
• 2006

The ever increasing requirements on today's compacts with regard to their geometry and precision call for flexible high-precision and most capable production systems. DORST Technologies has coped with these requirements by developing the new HP series for pressing forces between 1600 kN and 16000 kN and the new HS series for pressing forces between 150 kN and 1200 kN. These fully hydraulic presses featuring upper ram, lower ram, core rod, filler, up to 4 lower tool levels and up to 4 upper tool levels with closed-loop controlled movements. Thanks to latest servo technology and an electronic bus system it is possible to have all movements closed-loop controlled in the desired relation to each other. Thus, today's hydraulic presses provide high stroke rates, low energy consumption and a user-friendly interface. The input of data is carried out via clearly arranged screen masks on a touch-screen. The innovative DORST $IPG^{(R)}$ (Intelligent Program Generator) has been designed to support the set-up staff in preparing and optimizing the toolprogram. The combination of the machine type with the hydraulic unit determines the productivity in consideration of the specific application and the part to be pressed. Thanks to the closed-loop control circuits, DORST hydraulic automatic presses of the latest generation ensure unmatched precision and repeatability - and consequently process reliability - often without necessitating subsequent machining steps.

• Science of Emotion and Sensibility
• /
• v.20 no.4
• /
• pp.65-78
• /
• 2017

The current study examined the influence of individual trait such as Need-For-Touch level (NFT; high vs. low) and swiping orientation (vertical vs. horizontal) on product evaluation and preference when using touch-screen interface like a smart phone and a tablet. Swiping is one of the most common interaction techniques for changing pages or searching some aligned pictures on touch-screen interface and it can be used in vertical and horizontal orientations. The experiment revealed a significant interaction between swiping orientation and NFT on preference, however the interaction on change-in-price of given products was only marginally significant. To be specific, high NFT participants reported higher preference for horizontal-swipe than vertical-swipe products, but such difference did not occur with low NFT participants. The current study illustrates the influence of swiping orientation and NFT on product preference and it provides a new perspective of design principles especially for online shopping websites.

• Journal of the Korean Ceramic Society
• /
• v.51 no.4
• /
• pp.344-349
• /
• 2014

$RuO_2$-based high frequency thick-film resistor paste was printed at the speed of 10, 100, 300 mm/sec on the AlN substrate, and then sintered at between 750 and $900^{\circ}C$. The sintered thick films were characterized in terms of printing and sintering conditions. With increasing printing speed, the thickness and roughness of sintered film increased. The resistance of the thick film resistor was reduced by increasing the printing speed from 10 to 100 mm/sec, but did not significantly change at 300 mm/sec speed. With increasing sintering temperature, the surface roughness and thickness of sintered resistor film decreased. The reduction rate was large in case of fast printed resistor. The resistance of the resistor increased up to $800^{\circ}C$ with sintering temperature, but again decreased at the higher sintering temperature.

• Journal of the Korea Computer Graphics Society
• /
• v.17 no.4
• /
• pp.31-40
• /
• 2011

Projector-based visual systems are widely used for VR and experience display applications. But the illumination irregularity on the screen surface due to the screen material and its light reflection properties sometimes deteriorates the user experience. This phenomenon is particularly troublesome when the participants of the head tracking VR system such as CAVE or the motion generation experience system continually move around the system. One of reason to illumination irregularity is projector-screen specular reflection component to participant's eye's position and it's analysis needs high computation complexity. Similar to calculate specular lighting term using GPU's programmable shader, Our research adjusts every pixel's brightness in runtime with given 3D screen space model to reduce illumination irregularity. For doing that, Angle-based brightness compensate function are considered for specific screen installation and modified it for GPU-friendly compute and access. Two aspects are implemented, One is function access transformation from angular form to product and the other is piecewise linear interpolate approximation.

• Korean Journal of Materials Research
• /
• v.17 no.3
• /
• pp.173-178
• /
• 2007

Carbon nanotube cathodes(CNT cathodes) with a trench structure similar to gated structure of triode-type cathode were fabricated by a screen printing method using multi-walled carbon nanotubes. The effects of surface treatments on CNT cathodes were investigated for high efficiency field emission displays(FEDs). A liquid method easily removed the organic residue and protruded the CNTs. Field emission properties were measured by using a diode-type mode. The liquid method produced a turn-on field of $1.4V/{\mu}m$. The emission current density was measured about $3.1mA/cm^{2}$ at the electric field of $3V/{\mu}m$. The liquid method showed a high potential applicable to the surface treatment for triode-type FEDs.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.7
• /
• pp.571-574
• /
• 2010

Surface recombination loss should be reduced for high efficiency of solar cells. To reduce this loss, the BSF (back surface field) is used. The BSF on the back of the p-type wafer forms a p+layer, which prevents the activity of electrons of the p-area for the rear recombination. As a result, the leakage current is reduced and the rear-contact has a good Ohmic contact. Therefore, the open-circuit-voltage (Voc) and fill factor (FF) of solar cells are increased. This paper investigates the formation of the rear contact process by comparing aluminum-paste (Al-paste) with pure aluminum-metal(99.9%). Under the vacuum evaporation process, pure aluminum-metal(99.9%) provides high conductivity and low contact resistance of $4.2\;m{\Omega}cm$, but It is difficult to apply the standard industrial process to it because high vacuum is needed, and it's more expensive than the commercial equipment. On the other hand, using the Al-paste process by screen printing is simple for the formation of metal contact, and it is possible to produce the standard industrial process. However, Al-paste used in screen printing is lower than the conductivity of pure aluminum-metal(99.9) because of its mass glass frit. In this study, contact resistances were measured by a 4-point probe. The contact resistance of pure aluminum-metal was $4.2\;m{\Omega}cm$ and that of Al-paste was $35.69\;m{\Omega}cm$. Then the rear contact was analyzed by scanning electron microscope (SEM).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.58-58
• /
• 2000

Recently low resistance of bus line is required for large screen size RFT-CLD panels. As a result, lower resistance Al-alloy is currently reviewed extensively. The resistivity is required smaller than 10$\mu$$\Omega$cm and high resistance of chemical attack is required. In this paper, Al-W thin film were deposited on glass substrates by D.C magnetron sputtering system under various condition for high chemical resistance. Its properties were characterized by SEM, AFM, XRD, 4-point-probe, and cyclic voltammertry. The optimal condition of Al-W was 10$0^{\circ}C$, 100W, 0.4Pa, 23sccm(Ar) and 35$0^{\circ}C$, 20min. annealing. At that condition the resistivity of Al-W(3 wt.%) was about 11$\mu$$\Omega$cm. And when wt.% of W in Al-W alloy was higher than about 4%, Al-W alloy thin film has high chemical resistance.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.6
• /
• pp.1135-1142
• /
• 2017

In this paper, we propose an algorithm that can automatically mix the screen and sound by tracking the change of the sound data according to the screen change so that the real sound can be implemented in the personal broadcasting service. Since the personal broadcasting service is often broadcasted lively, it should be convenient to have a real-time mixing. Through experiments, it was confirmed that the sound pressure changes in a wide range in the high frequency band related to the clarity for understanding according to the rotation angle change of the screen. Regression analysis of the sound pressure changes at 2kHz, 4kHz, and 8kHz, The attenuation change of sound pressure was observed at the slope of -1.17, the slope of -2.0, and the slope of -2.44 for each frequency. Therefore, these experiment results can be applied to the VR service. This study is expected to be useful data in the implementation of personal broadcasting service.

• Journal of Convergence for Information Technology
• /
• v.10 no.8
• /
• pp.144-151
• /
• 2020

User-authentication process is necessary in Fintech Service. Especially, authentication on smartphones are carried out through PIN which is inputted through virtual keypads on touch screen. Attacker can analogize password by watching touched letter and position over the shoulder or using high definition cameras. To prevent password spill, various research of virtual keypad techniques are ongoing. It is hard to design secure keypad which assures safety by fluctuative keypad and enhance convenience at once. Also, to reconfirm user whether password is wrongly pressed, the inputted information is shown on screen. This makes the password easily exposed through high definition cameras or Google Class during recording. This research analyzed QWERTY based secure keypad's merits and demerits. And through these features, creating Tetris shaped keypad and piece them together on Android environment, and showing inputted words as Tetris shape to users through smart-screen is suggested for the ways to prevent password spill by recording.

• Journal of Broadcast Engineering
• /
• v.20 no.5
• /
• pp.687-696
• /
• 2015

JCT-VC (Joint Collaborative Team on Video Coding) continues developing HEVC/Screen Content Coding (HEVC/SCC) as an extension for efficiently coding screen content videos, including computer animations, graphics, and electrical documents, based on HEVC/Range extension (HEVC/RExt.). Color space conversion from RGB space being captured from CCD sensors is popular in natural video coding. However, the conversion is often undesired for screen contents because of a significant loss in perceptual quality. Therefore, several coding tools including cross-component prediction (CCP) and in-loop adaptive color space transform (ACST) have been developed for an efficient screen content video coding in order to reduce the redundancies between color spaces while maintaining the original color space. In this paper, we review the two coding tools, i.e., CCP and ACST exploiting the correlation in the RGB color space and conduct the performance analysis of the coding tools. In our simulation results, CCP and ACST provide 11.7% BD-rate saving and 16.4% BD-rate saving, respectively, while the two coding tools provide 18.2% BD-rate saving in total. Following this idea, if the two coding tools are exclusively selected, we provide 93% encoding measurement time with a 0.3% coding loss.