• Proceedings of the Materials Research Society of Korea Conference
• /
• 2001.05a
• /
• pp.75-75
• /
• 2001

• Nuclear Engineering and Technology
• /
• v.54 no.8
• /
• pp.2801-2808
• /
• 2022

The synergistic effect of ZrC nanoparticle pining and Re solution in W matrix on the thermal stability of tungsten was studied by investigating the evolution of the microstructure, hardness and tensile properties after annealing in a temperature range of 1000-1700 ℃. The results of metallography, electron backscatter diffraction pattern and Vickers micro-hardness indicate that the rolled W-1wt%Re-0.5 wt% ZrC alloy has a higher recrystallization temperature (1600 ℃-1700 ℃) than that of the rolled pure W (1200 ℃), W-0.5 wt%ZrC (1300 ℃), W-0.5 wt%HfC (1400-1500 ℃) and W-K-3wt%Re alloy fabricated by the same technology. The molecular dynamics simulation results indicated that solution Re atoms in W matrix can slow down the self-diffusion of W atoms and form dragging effect to delay the growth of W grain, moreover, the diffusion coefficient decrease with increasing Re content. In addition, the ZrC nanoparticles can pin the grain boundaries and dislocations effectively, preventing the recrystallization. Therefore, synergistic effect of solid solution Re element and dispersed ZrC nanoparticles significantly increase recrystallization temperature.

• Proceedings of the Optical Society of Korea Conference
• /
• 2007.02a
• /
• pp.277-278
• /
• 2007

Even though high NA, Hyper SIL system easily decline the optical performance even a little alignment error. Not only to overcome this instability but to maintain the high NA gain, we suggest a new system (Optimum SIL) which is a combination of each advantage of Hyper SIL and Hemi SIL. Simulation results shows that Optimum SIL system has much higher tolerance to various performance-lowering factors than Hyper SIL system even with a relatively small NA resignation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.281.1-281.1
• /
• 2016

Transition metal dichalcogenides (TMDCs) are promising layered structure materials for next-generation nano electronic devices. Many investigation on the FET device using TMDCs channel material have been performed with some integrated approach. To use TMDCs for channel material of top-gate thin film transistor(TFT), the study on high-k dielectrics on TMDCs is necessary. However, uniform growth of atomic-layer-deposited high-k dielectric film on TMDCs is difficult, owing to the lack of dangling bonds and functional groups on TMDC's basal plane. We demonstrate the effect of remote oxygen plasma pretreatment of large area synthesized few-layer MoSe2 on the growth behavior of Al2O3, which were formed by atomic layer deposition (ALD) using tri-methylaluminum (TMA) metal precursors with water oxidant. We investigated uniformity of Al2O3 by Atomic force microscopy (AFM) and Scanning electron microscopy (SEM). Raman features of MoSe2 with remote plasma pretreatment time were obtained to confirm physical plasma damage. In addition, X-ray photoelectron spectroscopy (XPS) was measured to investigate the reaction between MoSe2 and oxygen atom after the remote O2 plasma pretreatment. Finally, we have uniform Al2O3 thin film on the MoSe2 by remote O2 plasma pretreatment before ALD. This study can provide interfacial engineering process to decrease the leakage current and to improve mobility of top-gate TFT much higher.

• Journal of Engineering Education Research
• /
• v.25 no.4
• /
• pp.35-41
• /
• 2022

In order to enhance basic competencies for freshmen at engineering college, whose learning ability is gradually declining, a new course was developed to review basic mathematics and physics through a process of collecting opinions from fellow professors. Tests in six fields of math and physics with the same problems showed the correct answer rate rose from 24.8% at the beginning of the semester to 59.0% at the end of the semester after operating the course developed. According to the survey, the students' self-evaluated confidence on the basic competencies in 16 fields of math and physics showed a significant increase. Students with high confidence in basic competencies also received high actual grades. General high school graduates' confidence point in basic competencies improved from 54.7 at the beginning to 75.3 points at the end of the semester, while specialized high school graduates' enhanced from 38.3 to 64.0 which is higher than that of general high school graduates at the beginning of the semester.

• Journal of The Korean Association For Science Education
• /
• v.29 no.8
• /
• pp.910-922
• /
• 2009

The purpose of the study was to investigate the professional level of the Korean non-physics major middle-school science teachers in 'force and motion' content knowledge. For the study, nine science teachers who majored in chemistry, biology, or earth science were sampled from middle-schools in a big city in Korea. The physics concept test-tool (subjective type), which the authors developed, were administered, and then followed by in-depth interviews. The research findings are as follows: Firstly, non-physics major science teachers' correct answer rate in physics knowledge test of secondary school level was not so high that they may have difficulty in teaching correct concepts in physics to middle-school students. Secondly, some teachers show that they can not apply some physics concepts from one to another situation. That means that they may have difficulty in teaching physics conceptual application in various situations to students.

• Nuclear Engineering and Technology
• /
• v.56 no.9
• /
• pp.3608-3615
• /
• 2024

This study introduces a lead-free alternative for enhanced radiation protection. While lead aprons effectively attenuate ionizing radiation, concerns regarding flexibility, weight, and environmental hazards persist. In response, the present research is focused on producing an innovative sheet shielding comprised of carefully selected dense metal oxide microparticles (DMOs-MPs) and liquid silicone rubber (LSR). To evaluate the efficacy of the LSR samples, the current study uses rigorous testing procedures, such as microstructure characterization using EDX and FESEM. Furthermore, the study investigated key attenuation parameters within the LSR samples. Radiation protection was greatly and effectively supplied using DMOs-MPs filler (Bi-1 to Bi-7) in LSR samples; this protection reached 99.9% in the X-ray energy range. Due to the unique characteristics of the Bi-7, the results demonstrated that the samples' shielding efficiency improved with the addition of high atomic number and high-density fillers. It had the greatest attenuation coefficient and density. At 60 keV, Bi-7's density was 2.980 gcm^-3, and its LAC and MAC were 19.2621 cm^-1 and 6.4638 cm²/g, respectively. It also had the lowest half-value layer values in the energy range of 60-120 keV. The LSR samples showed effective radiation absorption for different energy levels, indicating that LSR can enhance the flexibility and comfort of the apron while providing adequate radiation protection. The incorporation of the DMOs-MPs with LSR represents an effective contribution and a noteworthy stride to enhance the safety and well-being of medical professionals routinely exposed to ionizing radiation.

• Journal of Society of Preventive Korean Medicine
• /
• v.8 no.2
• /
• pp.45-53
• /
• 2004

We measured biophoton emissions from seven acupuncture points of eight healthy subjects. The measured points are the Yintang, the $Danch{\bar{u}}$, the Shinketsu, the left and right $R{\bar{o}}ky{\bar{u}}$ and the left and right Yaotongwue of hands. The photo multiplier tube (H-610805s, Hamamatsu, Japan) has spectral range between 300nm and 650nm. Significantly low emission rate was observed at the Shinketsu where the rate was $3.7\;{\pm}\;1.8\;cps$. On the average the highest emission was from the Yaotongxue points where the rate was $11.3\;{\pm}\;5.4$. The high correlation between the left and right hands, and the low correlation between different points are consistent with previous reports.

• Publications of The Korean Astronomical Society
• /
• v.32 no.1
• /
• pp.157-161
• /
• 2017

The dusty torus of Active Galactic Nuclei (AGNs) is one of the important components for the unification theory of AGNs. The geometry and properties of the dusty torus are key factors in understanding the nature of AGNs as well as the formation and evolution of AGNs. However, they are still under discussion. Infrared observation is useful for understanding the dusty torus as thermal emission from hot dust with the dust sublimation temperature (~ 1500 K) has been observed in the infrared. We have analyzed infrared spectroscopic data of low-redshift and high-redshift quasars, which are luminous AGNs. For the low-redshift quasars, we constructed the spectral energy distributions (SEDs) with AKARI near-infrared and Spitzer mid-infrared spectra and decomposed the SEDs into a power-law component from the nuclei, silicate features, and blackbody components with different temperatures from the dusty torus. From the decomposition, the temperature of the innermost dusty torus shows the range between 900-2000 K. For the high-redshift quasars, AKARI traced rest-frame optical and near-infrared spectra of AGNs. Combining with WISE data, we have found that the temperature of the innermost dusty torus in high redshift quasars is lower than that in typical quasars. The hydrogen $H{\alpha}$ emission line from the braod emission line region in the quasars also shows narrow full width at half maximum of $3000-4000km\;s^{-1}$. These results indicate that the dusty torus and the broad emission line region are more extended than those of typical quasars.

• Coupled systems mechanics
• /
• v.12 no.4
• /
• pp.391-407
• /
• 2023

This paper presents a static study of a rectangular functional graded material (FGM) plate, simply supported on its four edges, adopting a refined higher order theory that looks for, only,four unknowns,without taking into account any corrective factor of the deformation energy with the satisfaction of the zero shear stress conditions on the upper and lower faces of the plate. We will have determined the contribution of these stresses in the transverse deflection of the plate, as well as their effects on the axial stress within the interfaces between the layers(to avoid any problem of imperfections such as delamination) and on the top and bottom edges of the plate in order to take into account the fatigue phenomenon when choosing the distribution law of the properties used during the design of the plate. A numerical statement, in percentage, of the contribution of the shear effect is made in order to show the reliability of the adopted theory. We will also have demonstrated the need to add the shear effect when the aspect ratio is small or large. Code routines are programmed to obtain numerical results illustrating the validity of the model proposed in the theory compared to those available in the literature.