• Corrosion Science and Technology
• /
• v.14 no.6
• /
• pp.273-279
• /
• 2015

Effects of passive film quality by chemical passivation and solution flow on the corrosion behavior of 304 stainless steel in HCl solution were investigated using a coloration indicator, and by corrosion weight loss, electrochemical polarization and element dissolution measurements. A high redness degree suggests a low passive-film integrity for 304 stainless steel following air exposure, while the minimum redness degree for the samples after chemical passivation suggests a high passive-film integrity. In the static condition, samples subjected to air exposure exhibited a high corrosion rate and preferential dissolution of Fe. Chemical passivation inhibited the corrosion rate due to the intrinsically high structural integrity of the passive film and high concentrations of Cr-rich oxides and hydroxide. Solution flow accelerated corrosion by promoting both the anodic dissolution reaction and the cathodic reaction. Solution flow also altered the preferential dissolution to fast uniform dissolution of metal elements.

• Journal of electromagnetic engineering and science
• /
• v.2 no.1
• /
• pp.39-44
• /
• 2002

A high speed data link capability is one of the critical factors in determining the performance of the spaceborne SAR system with high resolution because of the strict requirement far the real-time data transmission of the massive SAR data in a limited time of mission. In this paper, based on the data lint model characterized by the spaceborne small SAR system, the high rate multi-channel data link module is designed including link storage, link processor, transmitter, and wide-angle antenna. The design results are presented with the performance analysis on the data link budget as well as the multi-mode data rate in association with the SAR imaging mode of operation from high resolution to the wide swath.

• Macromolecular Research
• /
• v.14 no.6
• /
• pp.596-602
• /
• 2006

The effect of high-temperature spinning and poly(vinyl pyrrolidone) (PVP) additive on poly(vinylidene fluoride) (PVDF) hollow fiber membranes was investigated using differential scanning calorimetry, X-ray diffraction measurement, and scanning electron microscopy, together with the corresponding microfiltration performances such as water flux, rejection rate, and elongational strength. Using high-temperature spinning, porous hollow fiber membranes with particulate morphology were prepared through PVDF crystallization. The particulate structure of the membranes was further modified by the addition of miscible PVP with PVDF. Due to these effects, the rejection rate and strength of the fibers were increased at the expense of reduced water flux and mean pore size, which indicates that high-temperature spinning and PVP addition are vary effective to control the morphology of PVDF hollow fiber membranes for microfiltration.

• Elastomers and Composites
• /
• v.19 no.3
• /
• pp.163-177
• /
• 1984

The effect of curing temperature increase and sulfur amount added were studied with natural and synthetic rubbers. Also, the effects of TMTD, MBTS and mixture of zinc soaps of high molecular fatty acids added to natural rubber were investigated respectively. The experimental results showed that, in the case of the conventional curing ($145^{\circ}C$), natural rubber, compared with synthetic rubber, gave higher values in elongation, tensile strength, cure rate, and lower values in modulus change. But, at high temperature curing ($180^{\circ}C$), natural rubber showed faster reversion rate, and higher heat build-up compared to synthetic rubber, than in the conventional curing. Also, natural rubber produced at high temperature showed severe degradation in hardness and tensile strength before heat-aging as well as in hardness, modulus and tensile strength after heat-aging. Improved reversion effect was obtained with natural rubber either by blending mixture of zinc soaps of high molecular acids or by applying semi-efficient vulcanization system.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.4
• /
• pp.261-266
• /
• 1998

In developing the high density memory device, the etching of fine pattern is becoming increasingly important. Therefore, definition of ultra fine line and space pattern and minimization of damage and contamination are essential process. Also, the high density plasma in low operating pressure is necessary. The candidates of high density plasma sources are electron cyclotron resonance plasma, helicon wave plasma, helical resonator, and inductively coupled plasma. In this study, planar type magnetized inductively coupled plasma etcher has been built. The density and temperature of Ar plasma are measured as a function of rf power, flow rate, external magnetic field, and pressure. The oxide etch rate and selectivity to polysilicon are measured as the above mentioned conditions and self-bias voltage.

• Journal of Power Electronics
• /
• v.4 no.2
• /
• pp.87-95
• /
• 2004

A new fast-response high-current clamp DC-DC converter circuit design is presented that will meet the requirements and features of the new generation of microprocessors and digital systems. The clamp in the proposed converter amplifies the current in case of severe load changes and is able to produce high slew rate of output current and capability to keep constant the output voltage. This proposed high-current clamp technique is theoretically loss less, low cost and easy to implement with simple control scheme. This is modified from a basic buck topology by replacing the output inductor with two magnetically coupled inductors. Inductors are difference in inductance, one has large inductance and other has small inductance. The inductor with small inductance will take over the output inductor during fast load transient. It speedup the output current slew rate and reduce the output voltage drop in the case of heavy burden load changes.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.434-436
• /
• 1996

This paper deals with the signal communication system for MAGLEV which is indispensible to train control with safety and high speed operation. Therefore it is necessary for signal system to ensure high speed transmission. massive transmission, low error rate, and reliability of information. And the ensured information should be transmitted between ground and on-board for safety and high speed operation. For these reasons, we have considered the guaranteed reliability by applying FSK method and HDLC protocol. Because HDLC has the advantages of high efficiency, high reliability, low bit rate, and bit transparency. HDLC is the appropriate method for data transmission in MAGLEV.

• The Korean Journal of Food And Nutrition
• /
• v.8 no.1
• /
• pp.6-12
• /
• 1995

The purpose of this study was to examine the aptitude of wheat flour-Nuluks, for Takju brewing, which were made with Aspergillus oryzae, Rhizopus japonicus or Aspergillus usamii mut. Shirousamii, and to know the way of effective use the Aspergillus oryzae-Nuluk showed high saccharogenic activity, and Rhizopus japonicus-Nuluk high proteolytic activity. When these two Nuluks were combined, the activities of saccharogenic amylase and protease were more balanced. The Takju mash of Aspergillus oryzae-Nuluk was high in acidity and in amino acidity, and that of Rhizopus japonicus-Nuluk high in the content of free sugar, but, that of Aspergillus usamii mut. Shirousamii-Nuluk was low in amino acidity, free sugar and ethanol content. The Takju of Rhizopus japonicus-Nuluk was high in the content of suspended solid and slow in its sedimenting rate, but that of Aspergillus usamii mut. Shirousamii-Nuluk was not. The Takju which was made with combined use of Aspergillus oryzae-Nuluk and Rhizopus japonicus-Nuluk was more balanced in the composition of flavoring ingredients, and was slow in sedimenting rate of suspended solid. Moreover, it gained good result in sunsory evaluation test.

• International Journal of Computer Science & Network Security
• /
• v.23 no.5
• /
• pp.179-192
• /
• 2023

The widespread use of Cloud Computing, Internet of Things (IoT), and social media in the Information Communication Technology (ICT) field has resulted in continuous and unavoidable cyber-attacks on users and critical infrastructures worldwide. Traditional security measures such as firewalls and encryption systems are not effective in countering these sophisticated cyber-attacks. Therefore, Intrusion Detection and Prevention Systems (IDPS) are necessary to reduce the risk to an absolute minimum. Although IDPSs can detect various types of cyber-attacks with high accuracy, their performance is limited by a high false alarm rate. This study proposes a new technique called Fuzzy Logic - Objective Risk Analysis (FLORA) that can significantly reduce false positive alarm rates and maintain a high level of security against serious cyber-attacks. The FLORA model has a high fuzzy accuracy rate of 90.11% and can predict vulnerabilities with a high level of certainty. It also has a mechanism for monitoring and recording digital forensic evidence which can be used in legal prosecution proceedings in different jurisdictions.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.10
• /
• pp.1388-1393
• /
• 2000

The present study was conducted to examine the feasibility of utilising bamboo (Bambusa arundinacea) shoot shell (BSS) in ruminants. Chemical composition, rumen degradability and some antinutritional compounds were determined for fresh and boiled BSSs to evaluate its feed value and safety. Thirty-two Holstein heifers were allocated to four groups and used to investigate the response in growth rate to supplementing ammoniated rice straw with fresh shell (phase 1) or silage of boiled BSS (phase 2). All animals were offered ammoniated straw ad libitum with 1kg of cotton seed meal (phase 1) or 0.5 kg of cotton seed meal and 0.5 kg of concentrate mixture (phase 2) per head per day. The BSS was supplemented at levels of 0, 3, 6 or 9 kg/d (phase 1) and 0, 5, 10 or 15 kg/d (phase 2) (as fed basis). The BSS was very high in moisture content, and its contents of crude protein and neutral detergent fiber were 13~16% DM and 65~76% DM, respectively; boiling resulting in higher moisture and protein. No hydrocyanic acid was detected in both BSSs and content of tannins was negligible. Rumen degradability of BSS was reasonably high, and with boiling the rapidly degradable fraction decreased, and potentially degradable component increased. Silage of the boiled BSS was slightly lower in both rapidly and slowly degraded fractions than the fresh BSS. Animals consumed all supplemented BSSs without any adverse health problems. Intake of ammoniated straw decreased with the increasing levels of BSS, but total intake was higher in almost all supplementary groups than in the non-BSS. Heifers had a higher growth rate in phase 1 with fresh BSS than in phase 2 with ensiled shell, and daily weight gains were 622, 629, 744 or 690 g in phase 1, and 578, 575, 677 or 635 g in phase 2 at four BSS levels, respectively. For both phases growth rate was significantly higher for the animals in groups 3 and 4 than those in groups 1 and 2 (p<0.01), with little difference between groups 1 and 2 (p>0.05) but significant difference between groups 3 and 4 (p<0.05). Supplementation with BSS also resulted in an improved feed conversion rate, with the least concentrate consumption in group 3 for both phases. It is concluded that the BSS has a high potential nutritional value as indicated by its medium protein content, reasonably high rumen degradability, and that inclusion of BSS in ammoniated rice straw diet is not only safe to animals, but also may improve growth rate of ruminants and feed conversion rate. It may be disadvantageous to use high amounts of BSS in ammoniated straw diets.