• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.358-363
• /
• 1987

It is widely noted that pressure feedback systems have been devised to damp the fluid resonance effectively in precision speed control-for large inertia system. A compensation technique preserving the natural output disturbance discrimination characteristics at lower frequencies is proposed The load pressure across positive displacement acceleration. The technique involves feeding back load differential pressure, sensed by pressure transducers, though a simple analog compensatory circuit (high pass filter). The effectiveness of the damping is determined by the filter time donstant and loop gain. Nonlinear total hydraulic simulation results verify the possibility of linear model predictions of extending the closed loop bandwidth beyond the uncompensated frequency.

• Animal Bioscience
• /
• v.37 no.4_spc
• /
• pp.742-754
• /
• 2024

Asia is not only the primary region for global pig production but also the largest consumer of pork worldwide. Although the pig production in Asia has made great progress in the past, it still is confronted with numerous challenges. These challenges include: inadequate land and feed resources, a substantial number of small-scale pig farms, escalating pressure to ensure environmental conservation, control of devastating infectious diseases, as well as coping with high temperatures and high humidity. To solve these problems, important investments of human and financial capital are required to promote large-scale production systems, exploit alternative feed resources, implement precision feeding, and focus on preventive medicine and vaccines as alternatives to antibiotics, improve pig breeding, and increase manure recycling. Implementation of these techniques and management practices will facilitate development of more environmentally-friendly and economically sustainable pig production systems in Asia, ultimately providing consumers with healthy pork products around the world.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1871-1874
• /
• 2005

The direct write FIB technology has several advantages over contemporary micro-machining technology, including better feature resolution with low lateral scattering and capability of maskless fabrication. Therefore, the application of FIB technology in micro fabrication has become increasingly popular. In recent model of FIB, however the feeding system has been a very coarse resolution of about a few ${\mu}m$. Our research is the development of nano stage of 200mm strokes and 10nm resolutions. Also, this stage should be effectively operating in ultra high vacuum of about $1x10^{-7}$ torr. This paper presents the discussion and results of CAE of the 2 axes stages. we have estimated the stable static and dynamic characteristics for dual servo system. Therefore the 2 axes stages developed and future work are introduced at the end of the paper.

• Journal of Welding and Joining
• /
• v.34 no.5
• /
• pp.26-32
• /
• 2016

In this study, Hot-wire laser welding (HWLW) without keyhole which deposits filler material by feeding hot wire into the process zone has been performed to increase process performance. From the analysis of High Speed Imaging (HSI), for higher voltage, the process is prone to arc formation and drop transfer, which is disagreeable transfer mode. It is necessary that arc formation and drop (globular) transfer should be avoided by lower voltage. Therefore, continuous wire melting and transfer mode is preferred when adopting this process. The HWLW technique has high potential in terms of performance, precision, robustness and controllability for thick section of narrow gap.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.158-161
• /
• 2003

Recently, the evolution in production techniques (e.g. high-speed milling), the complex shapes involved in modem production design, and the ever increasing pressure for higher productivity demand a drastic improvement of the dynamic behavior of the machine tool axes used in production machinery. And also machine tools of multi functional and minimized parts are increasingly required as demand of higher accurate in some fields such as electronic and optical components etc. The accuracy and the productivity of machined parts are natural to depend on the linear system of machine tools. The complex workpiece surfaces encountered in present-day products and generated by CAD systems are to be transformed into tool paths for machine tools. The more complex these tool paths and the higher the speed requirements, the higher the acceleration requirements are needed to the machine tool axes and the motion control system, and the more difficult it is to meet the requirements. The traditional indirect drive design for high speed machine tools, which consists of a rotary motor with a ball-screw transmission to the slide, is limited in speed, acceleration, and accuracy. The direct drive design of machine tool axes. which is based on linear motors and which recently appeared on the market. is a viable candidate to meet the ever increasing demands, because of these advantages such as no backlash, less friction, no mechanical limitations on acceleration and velocity and mechanical simplicity. Therefore performance tests were carried out to machine tool axes based on linear motor. Especially, dynamic characteristics were investigated through circular test.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.8
• /
• pp.1123-1130
• /
• 2004

Two experiments were conducted to examine the effects of dietary inclusion of xylose on growth performance, nutrient digestibility and xylose absorption in the portal-drained viscera of broiler chicks. In Exp. 1, ninety male 14 day-old broilers were used to study the effects of different inclusion levels (0, 5, 10, 20 and 40%) of D-xylose in the semi-purified diets on the growth and nutrient digestibility of broilers. In Exp. 2, One hundred and eight male broilers, fed by precision feeding at 22 day-old, were used to investigate the absorption and transportation of dietary xylose in the portal-drained viscera of broiler. The results of Exp. 1 indicated that the growth of broilers was gradually decreased as the xylose level increased (p<0.01). With the xylose supplementation increased, the moisture in broiler excreta was gradually elevated (p<0.01), AME and the digestibilities of crude protein and ether extract were significantly reduced and the digestibilities of xylose and arabinose were also decreased (p<0.01). The results of Exp. 2 showed that the concentrations of ribose, xylose and galactose in serum were significantly influenced by different dietary levels of xylose (p<0.01), but there's no apparent difference among rhamnose, glucose and arabinose (p>0.05). The xylose concentration in serum was highest in Vena Cava, middle in Portal Vein and lowest in Ulnar Vein within 6 h after precision feeding. And then the xylose concentration in Portal Vein and Ulnar Vein were higher than that of Vena Cava. The concentration of ribose, xylose and galactose in serum were also significantly changed with time prolongation (p<0.01). The concentration of xylose in serum was highest in the 40% xylose treatment, middle in the 20% xylose group and lowest in the control group. The glycogen contents in liver and muscle were linearly decreased as the level of xylose increased (p<0.01). The higher the dietary level of xylose was, the lower digestibility of dietary xylose was (p<0.10). 40% xylose markedly decreased the digestibility of dietary glucose (p<0.01). In conclusion, high levels of xylose in the diets inhibited the growth and nutrient digestibility of broiler. The outputs of xylose from the hydrolyzation of wheat-based diet by xylanase should have no adverse effects on broiler performance.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.3
• /
• pp.28-35
• /
• 2013

Micro electrical discharge machining (EDM) as a non-contact machining process is very effective for micromachining with a thin electrode because of its low machining reaction force. The micro-electrode machining device has the advantage of maintaining high precision through the whole processes and uses a feeding wire in the thin electrode tool manufacturing process. This study describes the design and evaluation of a micro-electrode machining device using optical photo-interrupter. The electrode was fabricated by reverse electrical discharge machining. The performance of designed system was evaluated to measure tension force according to feed speed of wire. This system for micro electrode fabrication proves the feasibility in the micro-EDM process of the micro holes and parts for industrial applications.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.745-746
• /
• 2006

This lecture introduces new press, adapter and control concepts to size multi-level sintered components. The essential thing here is that the advantages of the multi-plate technology have been applied to the sizing adapter concept. Thus, the new concept meets the demands for a modern P/M manufacture and offers sufficient potential to size any future, complex sintered components such as synchronizer hubs, oil pump wheels and VCT parts with highest precision. Furthermore, it outlines a new flexible concept for the parts transfer, including feeding, orientation and lubrication while responding to the high demands on process stability and short change-over times.

• Journal of Biosystems Engineering
• /
• v.29 no.3
• /
• pp.267-274
• /
• 2004

Using geo-statistical method, yield data of different fields were analyzed to examine their field variability according to examining year, analysis method. Semivariogram and Kriged maps of geo-statistical analysis were used to examine their spatial dependence within a filed. The results obtained were as follows. 1) Descriptive statistical results of the yield showed that the yield and the difference of yield ranged from 100 to 946kg/10a and from 272 to 653kg/10a, respectively within a field. The coefficient of variation also ranged from 5.9 to 22.4 %. 2) More than 90% of yield data were placed between 350 to 850kg/10a. e results indicated that the gram mass flow sensor should have the measuring range from 0.34 to 0.82kg/s considering the yields when 4 rows head-feeding combine with 0.8 m/s of working speed was utilized. 3) A high spatial dependence was found within paddy field. The Q values ranged from 0.20 to 0.97, and the range of spatial dependence was from 6.9 to 53.3m. From this result, the rational sampling interval for yield investigation was estimated 6.9m. 4) Yields within a field between observation years showed considerable variability even if the field was evenly cultivated and managed. To apply precision agriculture in a paddy field, the field test should be continued to build a solid data-base including meteorological data, blight damage and insect damage.