• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.2 s.302
• /
• pp.27-36
• /
• 2005

This thesis proposed an effective encryption method for the DCT-based image/video contents and made it possible to operate in a high speed by implementing it as an optimized hardware. By considering the increase in the amount of the calculation in the image/video compression, reconstruction and encryption, an partial encryption was performed, in which only the important information (DC and DPCM coefficients) were selected as the data to be encrypted. As the result, the encryption cost decreased when all the original image was encrypted. As the encryption algorithm one of the multi-mode AES, DES, or SEED can be used. The proposed encryption method was implemented in software to be experimented with TM-5 for about 1,000 test images. From the result, it was verified that to induce the original image from the encrypted one is not possible. At that situation, the decrease in compression ratio was only $1.6\%$. The hardware encryption system implemented in Verilog-HDL was synthesized to find the gate-level circuit in the SynopsysTM design compiler with the Hynix $0.25{\mu}m$ CMOS Phantom-cell library. Timing simulation was performed by Verilog-XL from CadenceTM, which resulted in the stable operation in the frequency above 100MHz. Accordingly, the proposed encryption method and the implemented hardware are expected to be effectively used as a good solution for the end-to-end security which is considered as one of the important problems.

• Journal of the Korean earth science society
• /
• v.23 no.6
• /
• pp.474-485
• /
• 2002

The object of this study is to investigate the contamination degree and the interpretation of sea water intrusion phenomena with hydrogeochemical and hydrogen-oxygen stable isotope of coastal aquifer in the Gogum area, Korea. The physical characteristics of groundwaters is the neutral pH condition and transitional Redox environments, and groundwater is affected by sea water & surface water. The chemical properties of groundwaters are showing an increase in contamination owing to the sea water intrusion, waste water from the surface and agricultural chemicals. In the case of chloride, 6 samples of the groundwater in the study area are in excess of the drinking water standard. The Piper diagram shows the contamination in GG-4 and 14 by sea water intrusion. GG-3, 7 and 13 dominate the Na-HCO$_{3}$ type water and regional (GG-14) is indicated to dominate the Na-Cl type water such as sea water. According to the Sl (saturation index), sea water is oversaturated with respect to calcite and dolomite, GG-3, 14 and 18 are approaching the saturation state. The hydrogen-oxygen stable isotope ratio of groundwaters originates in the meteoric water, and groundwaters of GG-1, 5 and 14 display high oxygen isotope value due to surface water trespass and sea water intrusion. The result of this study, GG-14 is contaminated by sea water intrusion, groundwaters expected GG-3, 7 and 13 is in progress to artificial pollution and sea water intrusion.

• 대한공업교육학회지
• /
• v.38 no.2
• /
• pp.240-266
• /
• 2013

The purpose of this study is to investigate the self-directed learning readiness of university students' majored in science and engineering as life-long learners, and to analyze the relationship between self-directed learning readiness and learning style. Participants of this study are 142 students majored science and engineering in H university of Chung-nam province to participate in taking self-directed learning readiness tests and Kolb's learning style tests. The results of this study are as follows: First, the average of overall participants' self-directed learning readiness is 3.41, which is possibly regarded as 'an average' according to Guglielmino & Guglielmino (1991)'s interpretation of scores. Second, among four basic scales of participants' learning styles, the highest is found in Active Experiment (AE), the lowest is found in Abstract Conceptualization (AC). In addition, the highest thing of the four learning styles found among the participants is divergers (36.6%) and the lowest is convergers (13.4%). Finally, this study compares the high-level and low-level groups of self-directed learning readiness score with learning style. there is a statistically significant correlation between the score of self-directed learning readiness and CE, AC (p=.01). Therefore, self-directed learning readiness is related to learning style.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.6
• /
• pp.861-868
• /
• 2013

This study investigated the effects of Opuntia ficus-indica and other natural resources (OF) in db/db and C57 mice. Plasma triglycerides, cholesterol, alanine aminotransferase (ALT) activity, aspartate aminotransferase (AST) activity, fecal bile acid excretion, the histopathological appearance of the liver, and cholesterol-related mRNA expression were determined. Mice (12 db/db mice and 12 C57 mice) were assigned to diabetic-control (db-C), diabetic-OF treatment (db-OF), normal-control (C57-C), and normal-OF treatment (C57-OF) groups. Animals in the control group were fed an AIN-76 recommended diet and animals in the OF group were fed an experimental diet containing 5% of OF for 4 weeks. Concentrations of total plasma cholesterol, triglyceride, low density lipoprotein (LDL)-cholesterol, and very low density lipoprotein (VLDL)-cholesterol decreased with the administration of OF. In contrast, high density lipoprotein (HDL)-cholesterol levels were minimally affected by the experimental diet. Plasma AST and ALT showed lower activities in the db-OF group, and the fecal excretion of bile acid was reduced in the db-OF group. Histopathological analysis of the liver showed that fatty liver conditions in the db-OF group were more improved than db-C. Low-density lipoprotein receptor (LDL-R) and cholesterol 7${\alpha}$-hydroxylase (CYP7A1) mRNA expression were increased in the db-OF group as well. However, 3-hydroxy-3-methylglutaryl-coenzyme A reductase (HMG-CoA-R) mRNA expression was lower in the db-OF group. These results provide experimental evidence about improved lipid metabolism of the OF feeding in the db/db mice.

• Journal of Mushroom
• /
• v.18 no.3
• /
• pp.274-279
• /
• 2020

This study was conducted to investigate the characteristics of the medium used on the composting step, comparing the excavator agitator with the self-propelled turner. The temperature of the outdoor composting medium tended to increase rapidly after flipping in the turner. The late composting medium temperature was maintained at the excavator treatment area (farm practice), and the late composting effect progressed. During the field composting stage, various microorganisms such as Bacillus spp., Actinomycetes, fluorescent Pseudomonas spp., and filamentous fungi were distributed in the medium, and the density of aerobic bacteria involved in the decomposition of the medium was increased. Under high-temperature composting conditions, blue fungi, and mesophilic actinomycetes were inhibited or killed. Thermophilic actinomycetes, which play an important role in decomposing organic matter, showed higher densities than those observed in farm practices in the self-propelled turner process. The length of rice straw was slightly shorter when the self-propelled turner was used, and the water content did not show any significant difference between treatments. The a and b values tended to increase as the inverter was turned over. The CN ratio of the composting broth was lowered from 23.1 to 16.2 for the 5th turnover in the context of farming practices, and from 23.3 to 16.9 in the context of the self-propelled turner. The yield of each treatment was increased by 20% in 1 period, 28% in 2 periods, and 26% in 3 periods; the overall yield was 23%.

• Ocean and Polar Research
• /
• v.29 no.2
• /
• pp.135-153
• /
• 2007

Temporal (seasonal) and spatial distributions and variations of various physico-chemical factors (salinity, temperature, pH, DO, COD, SPM, POC, silicate, DIP, DIN) in surface and bottom waters were studied in the coastal environment with typical macro-tidal range and monsoonal weather condition, Gyeonggi Bay, west coast of Korea. Spacial distribution patterns of these factors were generally similar to each other, and appeared to be inversely related to the distribution pattern of salinity, suggesting that water quality of the study area was primarily controlled by the physical mixing process of Han-River freshwater with nearby coastal seawater. During flooding season, silicate- and nitrogen-rich Han River water directly flowed into offshore as far as $20\sim30\;km$ from the river mouth, probably causing serious environmental problems such as eutrophication and unusual and/or noxious algal bloom, etc. Except the surface water during summer flooding season, high concentrations of nutrients appeared generally in dry season, whereas low values in spring, possibly because of the occurrence of spring phytoplankton bloom. On the other hand, nutrient flux through the estuary seems to be primarily depending on river discharge, sewage discharge and agricultural activities, especially during the rainy season. Also, nutrients in this coastal waters are considered to be supplied from the sediments of tidal-flats, which developed extensively around the Han-River mouth, especially during fall and winter of dry and low discharge seasons, possibly due to the stirring of tidal flat sediments with highly enriched pore-water nutrients by storm. And also, COD and DIN concentrations in the study area consistently increased during the last 20 years, probably because of agricultural activities and increasing discharge of industrial and domestic wastes.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.1
• /
• pp.100-110
• /
• 2020

Objective: The objective of this study was to isolate proteolytic microorganisms and evaluate their effects on proteolysis in total mixed ration (TMR) silages of soybean curd residue. Methods: TMRs were formulated with soybean curd residue, alfalfa or Leymus chinensis hay, corn meal, soybean meal, a vitamin-mineral supplement, and salt in a ratio of 25.0: 40.0:30.0:4.0:0.5:0.5, respectively, on a basis of dry matter. The microbial proteinases during ensiling were characterized, the dominate strains associated with proteolysis were identified, and their enzymatic characterization were evaluated in alfalfa (A-TMR) and Leymus chinensis (L-TMR) TMR silages containing soybean curd residue. Results: Both A-TMR and L-TMR silages were well preserved, with low pH and high lactic acid concentrations. The aerobic bacteria and yeast counts in both TMR silages decreased to about 10⁵ cfu/g fresh matter (FM) and below the detection limit, respectively. The lactic acid bacteria count increased to 10⁹ cfu/g FM. The total microbial proteinases activities reached their maximums during the early ensiling stage and then reduced in both TMR silages with fermentation prolonged. Metalloproteinase was the main proteinase when the total proteinases activities reached their maximums, and when ensiling terminated, metallo and serine proteinases played equally important parts in proteolysis in both TMR silages. Strains in the genera Curtobacterium and Paenibacillus were identified as the most dominant proteolytic bacteria in A-TMR and L-TMR, respectively, and both their proteinases were mainly with metalloproteinase characteristics. In the latter ensiling phase, Enterococcus faecium strains became the major sources of proteolytic enzymes in both TMR silages. Their proteinases were mainly of metallo and serine proteinases classes in this experiment. Conclusion: Proteolytic aerobic bacteria were substituted by proteolytic lactic acid bacteria during ensiling, and the microbial serine and metallo proteinases in these strains played leading roles in proteolysis in TMR silages.

• Korean Journal of Microbiology
• /
• v.30 no.1
• /
• pp.15-29
• /
• 1992

Vibrio vuln$cus has been recognized as a pathogen of septicemia and wound infection, when the organism attacks high-risk persons with a history of hepatic disease. alcohol abuse. diabetes or any debilitative disease. Forty six strains of K vulnzjicus. isolated from 1025 marine specimens from May to Novemver for three years. from 1985 to 1987. were studied for their biochemical properties. growth requirements, serotype and drug susceptibilities. The isolates were different in their various biochemical reactions. Ninety-five percent of isolated strains were able to ferment lactose, while most strains didn't utilize sucrose in their biochemical test, for example ornithine, gelatin and mannitol were quite dit'ferent composition than those described in other reports. It was found that the biochemical test wasn't useful for identifying strain. The type of somatic 0 antiserum was determined in isolates from marine sources and in patients with Vibrio septicemia. In patient isolates. 1-2 group were 24% and 1-4 group were 42%. However. 02 group(33%) were more abundant in isolates from marine sources. Minimal inhibitory concentrations(M1Cs) of chloramphenicol, tetracycline. erythromycin and ampicillin were determinef for V vuln~ficus by broth dilution method. MIC90 was I , 0.25, :! and 4,ug/ml in patient isolates. 1, 0.25, 2 and 2 ,ug/ml in marine isolates. The divalent chelating agent, IDTA. inhibited the growth of V. vuln!'ficus at 6.25 mMlml of MIC90.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.6
• /
• pp.809-815
• /
• 1996

$Y_2O_3$-based metal-insulator-semiconductor (MIS) structure on p-Si(100) has been studied. Films were prepared by UHV reactive ionized cluster beam deposition (r-ICBD) system. The base pressure of the system was about $1 \times 10^{-9}$ -9/ Torr and the process pressure $2 \times 10^{-5}$ Torr in oxygen ambience. Glancing X-ray diffraction(GXRD) and in-situ reflection high energy electron diffracton(RHEED) analyses were performed to investigate the crystallinity of the films. The results show phase change from amorphous state to crystalline one with increasingqr acceleration voltage and substrate temperature. It is also found that the phase transformation from $Y_2O_3$(111)//Si(100) to $Y_2O_3$(110)//Si(100) in growing directions takes place between $500^{\circ}C$ and $700^{\circ}C$. Especially as acceleration voltage is increased, preferentially oriented crystallinity was increased. Finally under the condition of above substrate temperature $700^{\circ}C$ and acceleration voltage 5kV, the $Y_2O_3$films are found to be grown epitaxially in direction of $Y_2O_3$(1l0)//Si(100) by observation of transmission electron microscope(TEM). Capacitance-voltage and current-voltage measurements were conducted to characterize Al/$Y_2O_3$/Si MIS structure with varying acceleration voltage and substrate temperature. Deposited $Y_2O_3$ films of thickness of nearly 300$\AA$ show that the breakdown field increases to 7~8MV /cm at the same conditon of epitaxial growing. These results also coincide with XPS spectra which indicate better stoichiometric characteristic in the condition of better crystalline one. After oxidation the breakdown field increases to 13MV /cm because the MIS structure contains interface silicon oxide of about 30$\AA$. In this case the dielectric constant of only $Y_2O_3$ layer is found to be $\in$15.6. These results have demonstrated the potential of using yttrium oxide for future VLSI/ULSI gate insulator applications.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.77-77
• /
• 2017

Titanium and its alloys offer attractive properties in a variety of applications. These are widely used for the field of biomedical implants because of its good biocompatibility and high corrosion resistance. Titanium anodizing is often used in the metal finishing of products, especially those can be used in the medical devices with dense oxide surface. Based on SAE/AMS (Society of Automotive Engineers/Aerospace Material Specification) 2488D, it has the specification for industrial titanium anodizing that have three different types of titanium anodization as following: Type I is used as a coating for elevated temperature forming; Type II is used as an anti-galling coating without additional lubrication or as a pre-treatment for improving adherence of film lubricants; Type III is used as a treatment to produce a spectrum of surface colours on titanium. In this study, we have focused on Type II anodization for the medical (dental and orthopedic) application, the anodized surface was modified with gray color under alkaline electrolyte. The surface characteristics were analyzed with Focused Ion Beam (FIB), Scanning Electron Microscopy (SEM), surface roughness, Vickers hardness, three point bending test, biocompatibility, and corrosion (potentiodynamic) test. The Ti-6Al-4V alloy was used for specimen, the anodizing procedure was conducted in alkaline solution (NaOH based, pH>13). Applied voltage was range between 20 V to 40 V until the ampere to be zero. As results, the surface characteristics of anodic oxide layer were analyzed with SEM, the dissecting layer was fabricated with FIB method prior to analyze surface. The surface roughness was measured by arithmetic mean deviation of the roughness profile (Ra). The Vickers hardness was obtained with Vickers hardness tester, indentation was repeated for 5 times on each sample, and the three point bending property was verified by yield load values. In order to determine the corrosion resistance for the corrosion rate, the potentiodynamic test was performed for each specimen. The biological safety assessment was analyzed by cytotoxic and pyrogen test. Through FIB feature of anodic surfaces, the thickness of oxide layer was 1.1 um. The surface roughness, Vickers hardness, bending yield, and corrosion resistance of the anodized specimen were shown higher value than those of non-treated specimen. Also we could verify that there was no significant issues from cytotoxicity and pyrogen test.