• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.403-408
• /
• 2008

In this paper, the high efficiency and linearity Doherty power amplifier using DGS and adaptive bias technique has been designed and realized for 2.3GHz WiBro applications. The Doherty amplifier has been implemented us-ing silicon MRF 281 LDMOS FET. The RF performances of the Doherty power amplifier (a combination of a class AB carrier amplifier and a bias-tuned class C peaking amplifier) have been compared with those of a class AB amplifier alone, and conventional Doherty amplifier. The Maximum PAE of designed Doherty power amplifier with DGS and adaptive bias technique has been 36.6% at 34.01dBm output power. The proposed Doherty power amplifier showed an improvement 1dB at output power and 7.6% PAE than a class AB amplifier alone.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.37.4-37
• /
• 2001

This paper presents a vibration-rejection control design for a magnetic suspension system which has strong non-linearity, open-loop unstable characteristics, high-order flexible modes, and parameter variations. The target plant to be controlled consists of a U-core electromagnet and a flexible rail. We describe the test rig and formulate the mathematical model and then we set up a control problem as the mixed sensitivity problem where the augmented plant is constructed with frequency weighting functions and the feedback controller is designed by using the H$\infty$ controller. The effectiveness of the designed controller for the magnetic suspension system with high-order flexible modes is validated and justified using several simulations. These results show that the magnetic suspension system is robustly stable against disturbance and gives the well-damped tracking performance ...

• Korean Journal of Chemical Engineering
• /
• 제35권12호
• /
• pp.2474-2479
• /
• 2018

Plasma-enhanced atomic layer deposition (PEALD) is well-known for fabricating conformal and uniform films with a well-controlled thickness at the atomic level over any type of supporting substrate. We prepared nickel oxide (NiO) thin films via PEALD using bis(ethylcyclopentadienyl)-nickel ($Ni(EtCp)_2$) and $O_2$ plasma. To optimize the PEALD process, the effects of parameters such as the precursor pulsing time, purging time, $O_2$ plasma exposure time, and power were examined. The optimal PEALD process has a wide deposition-temperature range of $100-325^{\circ}C$ and a growth rate of $0.037{\pm}0.002nm$ per cycle. The NiO films deposited on a silicon substrate with a high aspect ratio exhibited excellent conformality and high linearity with respect to the number of PEALD cycles, without nucleation delay.

• 전기학회논문지
• /
• 제66권8호
• /
• pp.1215-1221
• /
• 2017

Parametric array transducers are used for highly directional speaker in an air environments. Piezoelectric micromachined ultrasonic transducers for parametric array transducers need DC-biased voltage driving signals in order to get high-directional quality-sound features. The existing power amplifier such as class A amplifiers has low efficiency and require large volume heatsinks. To overcome the above-mentioned disadvantages of the conventional amplifier, this paper proposes a new power amplifier system. The proposed power amplifier system ensures high linearity of output characteristic by utilizing the push-pull class B type amplifier. Furthermore, the proposed power amplifier system gets high efficiency because it contains the DC-DC converter-type power supply which can perform energy recovery and envelope tracking function. Also the paper suggests the detailed circuit topology. Its characteristics are verified by the detailed experimental results.

• 한국방사선학회논문지
• /
• 제15권6호
• /
• pp.781-788
• /
• 2021

피부는 방사선에 대한 민감도가 높기 때문에 방사선치료 시에 피부에 조사되는 선량을 정확하게 측정하여 과도한 피폭을 방지할 필요가 있다. 임상에서는 film, OSLD, TLD, glass 선량계등과 같은 선량계를 사용하여 피부선량을 측정하고 있지만, 이러한 선량계들은 피부곡면에서의 정확한 선량측정이 힘든 문제점이 있다. 본 논문에서는 이러한 문제를 해결하고자 인체 굴곡에 따라서 부착이 가능한 피부선량계를 개발하고 그 반응 특성을 평가하였다. 선량계 제작에는 높은 원자번호(Z_Pb: 82, Z_O: 8)와 밀도(9.53 g/cm³)로 방사선검출 측점에서 우수한 특성을 가지고 있는 Lead oxide(PbO)와 인체 굴곡에 따라 휘어질 수 있는 silicon 바인더를 사용하여 재조하였다. 한편 PbO 물질로 제작된 선량계의 경우 산화로 인한 성능 저하가 존재하기 때문에 parylene 등을 사용하여 성능저하를 방지해오고 있었지만, 기존에 사용된 parylene은 bending에 대한 영향을 받기 때문에 silicon을 이용한 새로운 형태의 passive layer를 제작하여 피부선량계에 적용하였다. 피부선량계의 특성평가는 SEM, 재현성, 선형성을 분석하여 평가하였다. SEM 분석을 통하여 bending에 영향을 받는지 평가하였으며, 6 MeV 에너지에서의 재현성, 선형성을 평가하여 피부선량계로 적용이 가능한지 평가하였다. SEM 분석을 통하여 선량계 표면을 관찰한 결과, parylene으로 passive layer가 올라간 parylene passive layer PbO 선량계는 구부러 졌을때, 표면에 crack이 발생하였다. 그에 반해 silicon passive layer가 올라간 silicon passive layer PbO 선량계에서는 crack 이 관찰되지 않았다. 재현성 측정 결과에서 silicon passive layer PbO 선량계의 RSD는 1.47%로 평가기준 RSD 1.5%를 만족하였으며, 선형성 평가 결과에서는 R²값이 0.9998로 나타나 평가기준 R² 0.9990을 만족하였다. silicon passive layer PbO 선량계는 bending에 따른 crack이 발생하지 않으며, 재현성, 선형성에서 높은 신호안정성과 정밀성, 정확성을 보여주어 피부선량계로의 적용이 가능한 것으로 평가되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.236-236
• /
• 2009

This paper describes the fabrication and characteristics of Schottky micro hydrogen sensors for high temperatures by using polycrystalline(poly) 3C - SiC thin film grown on Si substrates with thermal oxide layer using APCVD. Pd/poiy 3C-SiC Schottky diodes were made and evaluated by I-V and C-V measurements. Electric current density and barrier height voltage were $2\times10^{-3}\;A/cm^2$ and 0.58 eV, respectively. These devices could operate stably at about $400^{\circ}C$. According to $H_2$ concentrations, their barrier height($\Phi_{Bn}$) were changed 0.587 eV, 0.579 eV, 0.572 eV and 0.569 eV, respectively. the current was increased. Characteristics of implemented sensors have been investigated in terms of sensitivity, linearity of response, response rate and response time. Therefore, from these results, Pd/poly 3C-SiC Schottky devices have very high potential for high temperature chemical sensor applications.

• 한국전기전자재료학회논문지
• /
• 제14권6호
• /
• pp.470-474
• /
• 2001

This paper describes the fabrication and characteristics of CrN thin-film type pressure sensors, in which the sensing elements were deposited on SuS. 630 diaphragm by DC reactive magnetron sputtering in an argon-nitride atmosphere(Ar-(10%)N$_2$). The optimized condition of CrN thin-film sensing elements was thickness range of 3500$\AA$ and annealing condition(300$\^{C}$, 3 hr) in Ar-10%N$_2$ deposition atmosphere. Under optimum conditions, the CrN thin-films for strain gauges is obtained a high resistivity, ρ=1147.65 $\mu$Ωcm, a low temperature coefficient of resistance, TCR=186ppm/$\^{C}$ and a high temporal stability with a good longitudinal, 11.17. The output sensitivity of fabricated CrN thin-film type pressure sensors is 2.36 mV/V, 4∼20nA and the maximum non-linearity is 0.4%FS and hysteresis is less than 0.2%FS.

• 분석과학
• /
• 제33권5호
• /
• pp.209-214
• /
• 2020

This study has been carried out to develop a standard method for quantifying of 3 permitted artificial sweeteners (including sodium saccharine, aspartame, acesulfame potassium) contained in foods by HPLC-DAD. A simple and rapid sample pretreatment method was used to remove fat and protein from the test solution with Carrez clearing regent precipitant know to be effective for protein and fat removal. The artificial sweeteners in the test solution purified through sample pretreatment were detected by high performance liquid chromatograph using a Reverse phase C18 column (5 ㎛, 4.6 × 250 mm). The simultaneous quantitative test of 3 kinds of artificial sweeteners can be effectively performed on the high fat emulsified foods containing a large amount of fat. Using the established simultaneous quantitative test method, artificial sweeteners were tested in foods such as dairy products, snacks and chocolate. The results calibration curve showed good linearity with high regression coefficients and the result of recovery test showed satisfactory recoveries within 80~110 %.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.165-168
• /
• 2002

As the demand for higher data-rate chip-to-chip communication such as memory-to-controller, processor-to-processor increases, low cost high-speed serial links\ulcorner become more attractive. This paper describes a 0.25-fm CMOS 1.6Gbps/pin 4-level transceiver using Stub Series Terminated Logic for high Bandwidth. For multi-gigabit/second application, the data rate is limited by Inter-Symbol Interference (ISI) caused by channel low pass effects, process-limited on-chip clock frequency, and serial link distance. The proposed transceiver uses multi-level signaling (4-level Pulse Amplitude Modulation) using push-pull type, double data rate and flash sampling. To reduce Process-Voltage-Temperature Variation and ISI including data dependency skew, the proposed high-speed calibration circuits with voltage swing controller, data linearity controller and slew rate controller maintains desirable output waveform and makes less sensitive output. In order to detect successfully the transmitted 1.6Gbps/pin 4-level data, the receiver is designed as simultaneous type with a kick - back noise-isolated reference voltage line structure and a 3-stage Gate-Isolated sense amplifier. The transceiver, which was fabricated using a 0.25 fm CMOS process, performs data rate of 1.6 ~ 2.0 Gbps/pin with a 400MHB internal clock, Stub Series Terminated Logic ever in 2.25 ~ 2.75V supply voltage. and occupied 500 * 6001m of area.

• Advances in aircraft and spacecraft science
• /
• 제4권4호
• /
• pp.449-465
• /
• 2017

The aim of the present work is to present a computational study of the non-linear aero-elastic behavior of a multi-layered Thermal Protection System (TPS). The severity of atmospheric re-entry conditions is due to the combination of high temperatures, high pressures and high velocities, and thus the aero-elastic behavior of flexible structures can be difficult to assess. In order to validate the specific computational model and the overall strategy for structural and aerodynamics analyses of flexible structures, the simplified TPS sample tested in the 8' High Temperature Tunnel (HTT) at NASA LaRC has been selected as a baseline for the validation of the present work. The von $K{\acute{a}}rm{\acute{a}}n^{\prime}s$ three dimensional large deflection theory for the structure and a hybrid Raleigh-Ritz-Galerkin approach, combined with the first order Piston Theory to describe the aerodynamic flow, have been used to derive the equations of motion. The paper shows that a good description of the physical behavior of the fabric is possible with the proposed approach. The model is further applied to investigate structural and aero-elastic influence of the number of the layers and the stitching pattern.