• 전력전자학회논문지
• /
• 제26권3호
• /
• pp.176-182
• /
• 2021

This research proposes a high-frequency circuit that can accurately predict the differential mode noise of single-phase inverters at the circuit design stage. Proposed single-phase inverter high frequency circuit in the work is a form in which harmonic impedance components are added to the basic single-phase inverter circuit configuration. For accurate noise prediction, parasitic components present in each part of the differential noise path were extracted. Impedance was extracted using a network analyzer and Q3D in the measurement range of 150 kHz to 30 MHz. A high-frequency circuit model was completed by applying the measured values. Simulations and experiments were conducted to confirm the validity of the high-frequency circuit. As a result, we were able to predict the resonance point of the differential mode voltage extracted as an experimental value with a high-frequency circuit model within an approximately 10% error. Through this outcome, we could verify that differential mode noise can be accurately predicted using the proposed model of the high-frequency circuit without a separate test bench for noise measurement.

• KEPCO Journal on Electric Power and Energy
• /
• 제6권4호
• /
• pp.473-480
• /
• 2020

In this paper, we proposed a high frequency equivalent circuit considering parasitic impedance components for differential noise analysis on the input stage during DC-DC buck converter switching operation. Based on the proposed equivalent circuit model, we presented a method to measure parasitic impedance parameters included in DC bus plate, IGBT, and PCB track using the gain phase method of a network analyzer. In order to verify the validity of this model, a DC-DC prototype consisting of a buck converter, a signal analyzer, and a LISN device, and then resonance frequency was measured in the frequency range between 150 kHz and 30 MHz. The validity of the parasitic impedance measurement method and the proposed equivalent model is verified by deriving that the measured resonance frequency and the resonance frequency of the proposed high frequency equivalent model are the same.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.380-384
• /
• 2001

The household reftigerator's noise which is closely related with resident environment can hardly be evaluated its sound quality using the Korean Standards. Radiation characteristics of compressor noise consist of tonal noise in low frequency range and, or narrow band noise in high frequency range. In this study, measuring method for detecting the abnormal and low-level noise in high frequency band is presented, and control method for its reduction is proposed. After installing wall which is similar to living condition, we determined a major concerning frequency band of noise. It can be found the directivity of high frequency noise radiated from compressor by using experiment and analysis. According to isolation of noise transfer path, remarkable noise reduction is achieved.

• 한국소음진동공학회논문집
• /
• 제15권3호
• /
• pp.329-333
• /
• 2005

This paper is concerned with the measurement of low-frequency vibrations of structures using the image processing method. To measure the vibrations visually, the measurement system consists of a camera, an image grabber board, and a computer. The specific target installed on the structure is used to calculate the vibration of structure. The captured image is then converted into a pixel-based data and then analyzed numerically. The limitation of the system depends on the image capturing speed and the size of image. In this paper, we propose the methodology for the vibration measurement using the image processing method. The method enables us to measure the displacement directly without any contact. The current resolution of the vibration measurement is limited to sub centimeter scale. However, the frequency bandwidth and resolution can be enhanced by a high-speed and high-resolution image processing system.

• 환경영향평가
• /
• 제32권5호
• /
• pp.279-290
• /
• 2023

최근 신재생에너지로서 바람의 힘을 이용한 풍력발전단지가 전국에 설치되면서 소음 문제가 대두되고 있다. 환경영향평가 및 사후환경영향평가에서도 풍력발전단지에 대한 배경소음 및 저주파소음을 측정하도록 하고 있으며, 특히 저주파소음은 환경부에서 2018년 공표한 저주파소음 관리 가이드라인에 따라 생활소음 측정방법을 준용하여 측정하도록 규정하고 있다. 고풍속에서 큰 소음을 발생시키는 풍력발전기의 특성상 고풍속에서 소음 측정이 이루어져야 하나 풍속이 증가할 경우 풍잡음이 증가하여 생활소음 및 저주파소음이 제대로 평가되지 못하는 문제가 발생되었다. 따라서 풍력발전기에서 발생되는 소음의 종류를 확인하고 풍잡음 등 풍력소음 측정시 고려되어야 할 사항을 확인하였다.

• 한국음향학회지
• /
• 제40권6호
• /
• pp.607-614
• /
• 2021

승강기 소음에 대한 연구는 주로 발생 원인 및 저감 방안에 대한 것이 많았다. 승강기 소음을 정확하게 측정하고 평가하는 방법에 대해서는 아직 연구가 미비하다. 측정방법에 대해서는 국제표준으로 제정하여 측정 방법이 있지만 그것 또한 고층아파트에 적용하기 힘들고, 승강기 소음의 특성을 면밀히 반영하지 않은 것이 많다. 이러한 문제를 해결하고자 현행 규격에서 승강기 소음 측정 방법을 개선하는 연구가 이루어 졌다. 본 연구에서는 승강기 소음의 특성을 면밀히 파악하고자 하였다. 승강기 소음과 다른 설비기기와의 주파수 분석을 통해 승강기 소음이 다른 설비기기와는 다른 특성의 소음임을 검증 하였다. 승강기 소음은 구조전달소음으로 대표적인 구조전달소음인 중량바닥충격음과 비교 분석을 하였다. 승강기 소음과 중량바닥충격음과의 상관성은 0.9 수준으로 매우 높게 나타났다. 이 결과로 승강기 소음은 중 저주파대역이 주요한 구조전달소음이며 다른 설비기기와 함께 평가될 수 없음을 검증 하였다.

• 한국도로학회논문집
• /
• 제15권4호
• /
• pp.75-83
• /
• 2013

PURPOSES: The purpose of study is to understand the characteristic of driving noise from the front and rear tire for effective active noise cancellation application. METHODS : As literature review, noise measurement methods were reviewed. Noise measurement conducted at three kind of section by road slope using CPX(Close Proximity Method). Noise data was compared by total sound pressure level and 1/3 octave band frequency sound pressure level. Also, each section was compared by T-test using SPSS. RESULTS : In the case of the uphill section, it was shown that the sound pressure level of the front tire at Sugwang-Ri and Sinchon-RI sections was higher than that of the rear tire in low and high frequency band. In the case of high slope section of Sangsaek-Ri, the sound pressure level of the front tire was higher than that of the rear tire in high frequency. Also, in the case of the downhill section, it was shown that the sound pressure level of the front tire at Sugwang-Ri and Sinchon-RI sections was higher than that of the rear tire in low frequency band. However, the sound pressure levels of both the front and rear tires were approximately the same in the high slope section of Sangsaek-Ri. The result of T-test showed that total sound pressures of the front and rear tires were not different from each other in the case of high slope and high speed. CONCLUSIONS: Road slope was not an important variable for effective active noise cancellation.

• 한국공간구조학회논문집
• /
• 제17권1호
• /
• pp.93-100
• /
• 2017

With increasing number construction of high-rise building which has about 40 to 60 floors there have been many kinds of problem which related with usage from vibration. To predict response acceleration, it is important to assess correct natural frequency. However, due to the noise of MEMS sensor, it is difficult to measure dynamic characteristic such as natural frequency when measuring ambient vibration using MEMS sensor within cell phone. Therefore, a comparative analysis on vibration measuring applications was performed after measuring ambient vibration of 2 skyscrappers which have height between 133.5~244.3m that are located in Seoul and Observation tower using I-jishin APP with noise reduction function of MEMS sensor in order to verify the effectiveness of low noise type vibration measurement APP.

• Ocean and Polar Research
• /
• 제29권4호
• /
• pp.311-316
• /
• 2007

Ocean noise may be used for monitoring wind speed and rainfall rate on the sea surface, as well as for tracking whales' migration routes. In particular, low-frequency ocean noise has recently been of concern with relation to the behavior of marine mammals. Low-frequency ocean noise has been increasing over the past few decades due to increase of ship traffic and offshore oil industry activities. Mechanical noise such as flow noise and cable strumming noise may be induced if low-frequency ocean noise is measured by cabled traditional hydrophone in high current areas. To successfully measure low-frequency ocean noise in a shallow water environment with strong current, we developed a self-recording hydrophone. This paper describes the main configurations of the self-recording hydrophone and presents some results on measured data.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(1)
• /
• pp.37-40
• /
• 2001

Subject of this paper is analysis of channel noise and impedance characteristics for high speed power line communication to concerned noise of transmission line and impedance in the frequency range up to 30MHz. Parameters of transmission line was inducted from experimentally power line channel measurement. Moreover, Analysis of compared based on measurement of channel characters with simulation test for appear characters.