• 대한치과보철학회지
• /
• 제30권2호
• /
• pp.203-224
• /
• 1992

The purpose of this study was to evaluate the stress distribution developed in supporting structures by distal extension removable partial denture with 4-types of direct retainer. The direct retainers examined were Akers clasp, RPI clasp, RPA clasp and RPL clasp in bilateral & unilateral free end case. 3-dimensional photoelastic stress analysis was used to record the isochromatic fringe patterns and to calculate the compressive stress at measuring points. The results were as follows. 1. In bilateral free end case, RPI clasp exhibited the similar stress distribution on distal and mesial alveolar crest but Akers clasp exhibited higher stress concentration on distal alveolar crest than mesial alveolar crest. 2. In bilateral free end case, RPA clasp and RPL clasp exhibited the similar stress distribution on distal and mesial alveolar crest and RPL clasp exhibited higher stress concentration on buccal alveolar crest than lingual alveolar crest. 3. Akers clasp produced high stress concentration on residual alveolar ridge distally, but RPI clasp, RPA clasp and RPL clasp produced even stress distribution on residual alveolar ridge. 4. Removable partial denture in unilateral free end case exerted higher stress on abutment tooth root apex than bilateral distal extension removable partial denture.

• 한국환경과학회지
• /
• 제22권9호
• /
• pp.1213-1226
• /
• 2013

$PM_{10}$ concentration is related to the meteorological variables including to local and synoptic meteorology. In this study the $PM_{10}$ concentrations of Busan in 2007~2011 were analyzed and the days of yellow sand or rainfall which is more than 5 mm were excluded. The sections of $PM_{10}$ concentration were divided according to 10-quantiles, quartiles and 90-quantiles. The 90-quantiles of daily $PM_{10}$ concentration were selected as high concentration dates. In the high concentration dates the daily mean averaged cloudness, mean daily surface wind speed, daily mean surface pressure and PBL height were low and diurnal variation of surface pressure and daily maximum surface temperature were high. When the high $PM_{10}$ dates occurred, the west and south wind blew on the ground and the west wind blew strongly on the 850 hPa. So it seemed that long range transboundary air pollutants made effects on the high concentration dates. The cluster analysis using Hysplit model which is the backward trajectory was made on the high concentration dates. As a result, 3 clusters were extracted and on the short range transboundary cluster the daily mean relative humidity and cloudness were high and PBL height was low.

• 한국지구과학회지
• /
• 제34권7호
• /
• pp.693-710
• /
• 2013

동아시아 지역 봄철에 주로 발생하는 황사의 물리적 특성을 알아보기 위하여 부산지역에서 발생한 2009년 황사 기간의 종관 일기도와 자동기상관측장비(AWS)를 이용한 기상해석, $PM_{10}$ 샘플러와 레이저입자계수기(LPC)를 이용한 대기입자상 물질농도 분석, 위성영상과 역궤적분석 모델을 이용한 발생원을 조사하였다. 2009년 2월 20일의 경우 (사례 1), $PM_{10}$ 농도가 급격히 증가할 때 $0.3-1.0{\mu}m$의 작은 입자의 에어로솔 체적 농도 분포가 감소한 반면 $1.0-10.0{\mu}m$의 큰 입자의 농도는 증가하였다. 그 후 $PM_{10}$ 농도가 감소할 때 지상의 풍향은 북풍에서 남서풍으로 변하였으며, 전체 에어로솔 농도는 감소하였다. $PM_{10}$과 $1.0-10.0{\mu}m$의 큰 입자 농도의 상관계수는 0.9 이상으로 높은 양의 상관관계를 나타내었다. 이는 내몽골 지역에서 발달된 황사가 중국 고비 사막을 통과하여 한반도로 유입된 것으로 추측할 수 있었다. 2009년 4월 25일의 경우 (사례 2), $PM_{10}$ 농도가 급격히 증가할 때 $0.3-0.5{\mu}m$의 작은 입자의 에어로솔 체적 농도 분포가 감소한 반면 $0.5-10.0{\mu}m$의 큰 입자의 농도는 증가하였다. 그 후 $PM_{10}$ 농도가 감소할 때 $0.3-0.5{\mu}m$의 작은 입자의 농도는 증가한 반면 $0.5-10.0{\mu}m$의 큰 입자의 농도는 감소하였다. 이 때 지상의 풍향은 북동풍에서 남서풍으로 변한 후 다시 북동풍으로 변하였다. $PM_{10}$과 $1.0-10.0{\mu}m$의 큰 입자의 농도의 상관계수는 약 0.9에 가까운 높은 양의 상관관계를 나타내었다. 입자의 역궤적 수송 모델 분석 결과, 만주지역과 중국 동쪽 해안으로부터 한반도로 유입된 것으로 추측할 수 있었다.

• 한국안전학회지
• /
• 제31권4호
• /
• pp.48-54
• /
• 2016

The prediction of various emissions from coal combustion is an important subject of researchers and engineers because of environmental consideration. Therefore, the development of the models for predicting pollutants very fast has received much attention from international research community, especially in the field of safety assessment. In this work, response surface method was introduced as a design of experiment, and the database for RSM was set with the numerical simulation of a drop tube furnace (DTF) to predict the spatial distribution of pollutant concentrations as well as final ones. The distribution of carbon dioxide in DTF was assumed to have Boltzman function, and the resulted function with parameters of a high $R^2$ value facilitates predicting an accurate distribution of $CO_2$. However, CO distribution had a difference near peak concentration when Gaussian function was introduced to simulate the CO distribution. It might be mainly due to the anti-symmetry of the CO concentration in DTF, and hence Extreme function was used to permit the asymmetry. The application of Extreme function enhanced the regression accuracy of parameters and the prediction was in a fairly good agreement with the new experiments. These results promise the wide use of statistical models for the quantitative safety assessment.

• 한국환경과학회지
• /
• 제11권5호
• /
• pp.411-418
• /
• 2002

The current study evaluated the disinfection efficiency of free chlorine and chloramine for microorganisms on various pipe materials, such as copper, galvanized steel, carbon steel, and stainless steel. In addition, the effect of internal pipe corrosion and corrosion inhibitors on the bactericidal efficiency was evaluated using a simulated loop. For disinfection with a phosphate corrosion inhibitor, chloramination was found to be more effective than chlorination due to its persistence. Free chlorine disinfection was optimized with a high phosphoric acid concentration, while chloramine disinfection was optimized with a high phosphoric acid or low polyphosphate concentration. In simulated copper and galvanized steel loop tests, chloramination with phosphoric acid was demonstrated to be more effective.

• International Journal of Safety
• /
• 제9권1호
• /
• pp.35-42
• /
• 2010

We measured the concentrations of air pollutants at several residential sites, roadside sites and industrial sites in Iwate Prefecture, Japan. And the concentration distributions of air pollutants were estimated by atmospheric dispersion model using air emissions data. Based on those results, we calculated environmental risk of air pollutants emitted in Iwate Prefecture. As a result, it was found that the surround of factories with high emissions and highly toxic chemicals and the roadsides were high risk area, benzo(a)pyrene, formaldehyde and ozone exceeded the $10^{-5}$ risk level. Moreover, we tried to use "Loss of life expectancy: LLE" for an index to explain those risk to general public intelligibly. The total LLE of the carcinogenic chemicals was about 8.6 hours. Moreover, LLE of ozone was about 9.2 hours. Ozone has a big influence compared with the carcinogenic chemicals.

• 한국산학기술학회논문지
• /
• 제21권10호
• /
• pp.325-333
• /
• 2020

현재 자연 하천의 유사농도의 측정에 있어서 실제 측정은 기상 조건에 영향을 받으며, 기계적 한계로 인해 하천바닥에 인접한 소류사 구간의 유사농도 측정값은 부유사 구간의 유사농도 측정값 보다 신뢰도가 낮다. 그리하여, 하천의 바닥농도는 이론식을 통해 산정되어왔으나, 기존 유사농도 계산 공식들의 바닥농도 산정값은 실측값에 비해 신뢰도가 낮고 서로 다른 공식 간의 차이는 여러 조건에 따라 천차만별이다. 따라서 하천의 바닥농도를 산정하기 위해 보다 신뢰성이 높은 공식이 요구되고 있다. 본 연구는 하천의 유사농도에 정보엔트로피이론을 적용하여 유사농도분포와 평균유사농도의 결정방법을 제시하고 평균유사농도와 바닥농도의 관계를 통해 바닥농도를 산정하는 방법을 제시하였다. 유사농도 분포의 확률은 제약조건하에 계산된 최대 엔트로피에 의해 일정한 확률분포를 나타내게 되고, 이러한 관계에 근거하여 유사농도분포, 평균유사농도 그리고 바닥유사농도 간의 관계를 유도하고 측정 표본을 통해 바닥 유사농도를 산정할 수 있다. 본 연구의 이론 검증을 위해 과거 실험의 유사농도 측정값을 사용하여 유도된 유사농도분포와 평균유사농도 공식을 적용하였으며, 유도된 두 공식의 관계를 이용하여 대표 농도변수(EN : Equilibrium N )를 도출하였다. 대표 농도변수를 통해 산정한 점 농도는 실측값과 결정계수가 평균적으로 R2=0.924의 높은 신뢰도를 보였다. 이를 통하여, 실제 하천의 부유사 구간과 소류사 구간의 유사농도의 전체 경향을 보다 쉽게 파악하고 평균유사농도와 바닥농도의 관계를 이용하여, 신뢰도가 확보된 바닥농도를 손쉽게 산정할 수 있다.

• 국제초고층학회논문집
• /
• 제3권2호
• /
• pp.121-145
• /
• 2014

The story shear force distributions of most seismic design codes generally reflect the influences of higher vibration modes based on the elastic deformations of structures. However, as the seismic design allows for the plastic behavior of a structure, the story shear force distribution shall be effective after it is yielded due to earthquake excitation. Hence this study conducted numerical analyses on the story shear force distributions of most seismic design codes to find out the characteristics of how a structure is damaged between stories. Analysis results show that the more forces are distributed onto high stories, the lower its concentration is and the more energy is absorbed. From the results, this study proposes the optimum story shear force distribution and its calculation formula that make the damages uniformly distributed onto whole stories. Consequently, the story damage distribution from the optimum calculation formula was considerably more stable than existing seismic design codes.

• 한국환경보건학회지
• /
• 제31권5호
• /
• pp.387-397
• /
• 2005

In oder to understand the deposition possibility of water-soluble inorganic ions in the atmospheric fine particulates for the human respiratory tract, the mass size distribution of ion species was measured using an Anderson sampler in the Iksan during fall, 2004. Samples were analyzed for major water-soluble ions using Dionex DX-100 ion chromatograph. The size distribution of water-soluble inorganic ions in the atmospheric particulates appeared bimodal distribution, which were divided around $1-2{\mu}m$ into two groups. Mass site distribution of total ion in the coarse mode was found to be almost similar level during the sampling period, but fluctuations of mass size distribution in the fine mode were observed. Considering the mass size distribution of total ion concentrations for the respiratory deposition region, it was found that about 77.1% of total tons could be deposited in the alveolar region, and which dominated the daily variation of total ion concentrations. The concentration of total ions, which could be deposited in both the head region and the tracheobronchial region, was $3.95{\mu}g/m^3$, whereas that in the alveolar rerion was $13.28{\mu}g/m^3$. Dominant ions which could be deposited in the alveolar region were ${NO_3}{^-},\;{SO_4}^{2-}\;and\;{NH_4{^+}$, accounting for about 40%, 27% and 22% of the total ions, respectively. Although $K^+$ was approximately 3% of total ions, it was shown that most of this could be deposited in the alveolar region due to its high fraction of small size distribution originated from anthropogenic source of biomass burning. The presence of these ions in the fine mode may be of public health significance as they are very biologically harmful to health and have a high probability of being deposited in human lung tissue.

• Bulletin of the Korean Chemical Society
• /
• 제31권5호
• /
• pp.1345-1348
• /
• 2010

Highly monodisperse polystyrene (PS) nanospheres were fabricated by surfactant-free emulsion polymerization in water using styrene, 2,2'-azobis(2-methyl propionamidine) dihydrochloride (AIBA), and poly(vinyl pyrrolidone) (PVP). The size and distribution of the PS nanospheres were systematically investigated in terms of initiator concentration, stabilizer concentration, reaction temperature, reaction time, and reactant concentration. With increasing AIBA initiator concentration, PS particle sizes are raised proportionally, and can be controlled from 120 to 380 nm. Particle sizes were reduced with increasing PVP concentration. This decrease occurs because a high PVP concentration leads to a large number of primary nuclei in the early stage of polymerization. When the reaction temperature increased, the sizes of the PS particles decrease slightly. The particles grew quickly during the initial reaction stage (1-3 h) and the growth rate became steady-state after 6 h. The PS sizes approximately doubled when the reactant (styrene, PVP, azo-initiator) concentrations were increased by a factor of eight.