• Fisheries and Aquatic Sciences
• /
• 제4권4호
• /
• pp.265-267
• /
• 2001

In this study, lipid classes and fatty acids composition in viscera and muscle of the philippines Pinkgray goby, Amblychaeturichtys hexanema were determined. The viscera contained high levels of total lipid $(TL,\;4.8\%)$, while the muscle contained less TL $(0.5\%)$. TL in the viscera consisted of triacylglycerol $(83.9\%)$, diacylglycerol $(7.9\%)$, polar lipid $(7.4\%)$, and cholesterol $(0.8\%)$. However, the muscle contained a small amount of TG $(3.0\%)$ and much more PL $(73.8\%)$. Principal fatty acids composition of PL and NL in the viscera and muscle were 16:0, 16:1n-7, 18:0, 18: 1n-9, 18:1n-7, l8:3n-3, 20:5n-3, 22:5n-3, and 22:6n-3.

• 대한전기학회논문지
• /
• 제41권2호
• /
• pp.185-191
• /
• 1992

In this paper, it is attempted to distinguish the charged particles and to judge the polarity by the use of Thermally Stimulated Current(TSC) and Temperature Gradient Thermally Stimulated Surface Potential Measurement(TG-TSSP)with experimental insulation material XLPE-EVA for power cables which is made by blending cross-linked polyethylene(XLPE) and ethylene-vinylacetate copolymer(EVA). In addition, it is performed to investigate the effect of EVA blending. From the experimental results, it is known that for the case of XLPE-EVA blended experimental material, the generation of space charged electric field is not obtained in the high temperature region due to the obatruction of the injection of trapping carrier by the electron and the positive hole.

• 한국표면공학회지
• /
• 제34권3호
• /
• pp.258-263
• /
• 2001

Siloxane thin films were fabricated on a silicon wafer by spin-coating using a siloxane solution made by the sol-gel process. Fluorine was doped using$ CF_4$ plasma treatment. The film was then annealed in-situ state in the nitrogen atmosphere. In order to examine the influence of annealing and fluorine doping on the siloxane thin film, thermogravimetric-differential thermal analysis (TG-DTA), Fourier transform-infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) were used and the dielectric constant was determined by the high-frequency capacitance-voltage method. Stable siloxane films could be obtained by in-situ annealing in a nitrogen atmosphere after $CF_4$ plasma treatment, and the dielectric value of the film was $\varepsilon$ 2.5.

• Bulletin of the Korean Chemical Society
• /
• 제29권1호
• /
• pp.181-186
• /
• 2008

2,5-Di-(2'-hydroxyethoxy)-4'-nitrostilbene (3) was prepared and polycondensed with terephthaloyl chloride, adipoyl chloride, and sebacoyl chloride to yield novel T-type polyesters (4-6) containing the NLO-chromophores dioxynitrostilbenyl groups, which constituted parts of the polymer backbones. Polymers 4-6 are soluble in common organic solvents such as acetone and N,N-dimethylformamide. They showed thermal stability up to 260 oC in thermogravimetric analysis with glass-transition temperatures obtained from differential scanning calorimetry in the range 90-95 oC. The second harmonic generation (SHG) coefficients (d33) of poled polymer films at the 1064 nm fundamental wavelength were around 1.42 ´ 10-9 esu. The dipole alignment exhibited high thermal stability up to 5 oC higher than glass-transition temperature (Tg), and there was no SHG decay below 100 oC due to the partial main-chain character of polymer structure, which is acceptable for NLO device applications.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.273-276
• /
• 2003

The non-evaporable water and calcium hydroxides were measured by TG/DTA for studying the temperature effect on hydration of concrete mixture. The experimental parameters introduced in this study were the curing temperatures, ages and W/C ratios. The mixing temperature was also controlled to improve the efficiency of experimental work. While the mixture cured at high temperature showed the large quantity of non-evaporable water and calcium hydroxides at early age, the production rate of these hydration products was decreased as increasing the curing age, and the quantity of hydration product became smaller than that of the corresponding mixture cured at lower temperature at later age.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1025-1029
• /
• 2003

We studied the cross-sectional profiles of deformed thermoplastics in hot embossing process and compared with melt flow index for various embossing conditions such as embossing temperature, embossing pressure and initial thickness of the thermoplastics. The fastest embossing times for complete penetration of the cavities were obtained at temperature greater than $60^{\circ}C$ above glass transition temperature (Tg). When the melt flow index of polymer is low, the penetration ratio does not become large even if the embossing pressure increases. The complete occupation of the cavities was easier obtained with high melt flow index polymer than low melt flow index polymer at the same process condition. We believe these results can be very useful for optimizing nanostructured hot embossing also known nanoimprinting process conditions.

• 펄프종이기술
• /
• 제31권1호
• /
• pp.79-88
• /
• 1999

The stability and performance (peel strength) of the acrylic copolymer and various modified rosin systems were investigated. The peel strength was measured over a wide range of scaling rates, and the influence of the viscoelasticity of the PSA(pressure sensitive adhesive) was considered. In the case of miscible systems, the peak of peel strength (PSA performance) over wide peel rates was changed and modified systematically with increasing glass transition temperature of the blends. The peak of the peel strength for blended systems shifts toward the lower rate side as glass transition temperature ($T_g$) of the blend increased. The influence of esterification of the rosin on performance and stability against deterioration was greatly modified by blending with rosin of glycerol ester and rosin pentaerythritol ester. The failure mode of the blend varies with the combination with acrylic copolymer and modified rosin, and cohesive failure was found at a lower peel rate while interfacial failure was found at a high peel rate. A few systems where a single Tg could be measured, despite the fact that two phases were observed microscopically, were detected.

• 한국세라믹학회지
• /
• 제26권4호
• /
• pp.471-478
• /
• 1989

In this study we investigated the gelation time of sol which containing mixtures of TEOS with H2O, ethanol, HCl in the preparation of monolithic silica glass through Sol-Gel method. In this case apparent activation energies were observed by Arrhenius equation. We investigated the conversion from gel to glass in drying and heat treatment stages using DT-TG, FT-IR, XRD analysis and dried gel conversed to glass by heat treatment up to 85$0^{\circ}C$. The results of this experiment showed that the gelation time of solutions were promoted when increasing the amount of addition of H2O and HCl catalyst for TEOS and high reaction temperature of solution.

• 전자통신동향분석
• /
• 제19권5호통권89호
• /
• pp.87-94
• /
• 2004

기존의 통신 시스템에 비해 매우 넓은 대역폭을 사용하는 UWB 시스템은 기존의 유선장치를 무선장치로대치할 수 있는 유일한 고속 무선 전송기술로서 가정내 멀티미디어 데이터 전송을 위한 근거리 무선 홈네트워크 기술로 부각되고 있다. 현재 IEEE802.15의 TG3a에서는 UWB 기술을 이용한 고속 WPAN의 물리계층에 대한 표준화가 진행되고 있으며, MBOA에서 주도하고 있는 MB-OFDM 시스템과 Motorola에서 주도하고 있는 DS-UWB 시스템의 2가지 제안서로 압축되어 표준화가 진행되고 있다. 본 논문에서는 현재까지의 표준화 진행 상황 및 양측에서 제안된 UWB 물리계층 표준화 기술 동향에 관하여 살펴본다.

• 한국생산제조학회지
• /
• 제19권3호
• /
• pp.388-393
• /
• 2010

In recent years the research has been focused on the preparation of special glasses, i.e., chalcogenide and heavy metal oxide ones that can transmit optical radiation above 2 um and also other optical parameters exceed those of silica based glasses. The attention in this paper is focused on chalcogenide glasses, on preparation of high quality base glass, for an application in infrared optical product design and manufacture. The amorphous materials of As-Se and Ge-As-Se chalcogenides were prepared by a standard melt-quenching technique. The compositions were mesaured by ICP-AES and EPMA, and structural and thermal properties were studied through various annealing processes. Several anomalies of glass transition and crystallization were observed in the DSC/DTA/TG results of the chalcogenide glass.