• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2A
• /
• pp.121-127
• /
• 2010

In this paper, we propose a computationally efficient scheduling algorithm that can arbitrarily control the throughput-fairness tradeoff in a multiuser wireless communication environment. As a new scheduling criterion, we combine linearly two well-known scheduling criteria such as one of achieving the maximum sum throughput and the other of achieving the maximum fairness, so as to control the relative proportion of the throughput and the fairness according to a control factor. For linear combining two different criteria, their optimization directivenesses and the units should be unified first. To meet these requirements, we choose an instantaneous channel capacity as a scheduling criterion for maximizing the sum throughput and the average serving throughput for maximizing the fairness. Through a unified linear combining of two optimization objectives with the control factor, it can provide various throughput-fairness tradeoffs according to the control factors. For further simplification, we exploit a high signal-to-noise ratio (SNR) approximation of the instantaneous channel capacity. Through computer simulations, we evaluate the throughput and fairness performances of the proposed algorithm according to the control factors, assuming an independent Rayleigh fading multiuser channel. We also evaluate the proposed algorithm employing the high SNR approximation. From simulation results, we could see that the proposed algorithm can control arbitrarily the throughput-fairness performance between the performance of the scheduler aiming to the maximum sum throughput and that of the scheduler aiming to the maximum fairness, finally, we see that the high SNR approximation can give a satisfactory performance in this situation.

• Journal of Communications and Networks
• /
• v.18 no.3
• /
• pp.429-438
• /
• 2016

In this paper, we investigate an interference mitigation scheme by antenna selection in device-to-device (D2D) communication underlaying downlink cellular networks. We first present the closed-form expression of the system achievable rate and its asymptotic behaviors at high signal-to-noise ratio (SNR) and the large antenna number scenarios. It is shown that the high SNR approximation increases with more antennas and higher ratio between the transmit SNR at the base station (BS) and the D2D transmitter. In addition, a tight approximation is derived for the rate and we reveal two thresholds for both the distance of the D2D link and the transmit SNR at the BS above which the underlaid D2D communication will degrade the system rate. We then particularize on the small cell setting where all users are closely located. In the small cell scenario, we show that the relationship between the distance of the D2D transmitting link and that of the D2D interfering link to the cellular user determines whether the D2D communication can enhance the system achievable rate. Numerical results are provided to verify these results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.9
• /
• pp.1241-1244
• /
• 2020

In this paper, we consider a downlink non-orthogonal multiple access system with a base station and N mobile stations, where we assume that instantaneous channel state information (CSI) is available at the base station. A power allocation scheme is proposed to achieve perfect fairness, which means equal data rates for all mobile stations. However, the power allocation scheme using full CSI requires high complexity. Hence, a simple power allocation scheme with low complexity is proposed by using high signal-to-noise power ratio (SNR) approximation. The simple power allocation scheme can achieve perfect fairness only for high SNR. However, it needs only the best CSI and the simple procedure to obtain power allocation coefficients. From simulation results, we show that the simple power allocation scheme provides remarkable fairness performance at high SNR.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.4 no.3
• /
• pp.190-196
• /
• 2009

A new time adapted threshold using the standard deviations of Wavelet coefficients after Wavelet transform by frame scale is proposed. The time adapted threshold is set up using the sum of standard deviations of Wavelet coefficient in level 3 approximation and weighted level 1 detail. Level 3 approximation coefficients represent the voiced sound with low frequency and level 1 detail coefficients represent the unvoiced sound with high frequency. After reducing noise by soft thresholding with the proposed time adapted threshold, there are still residual noises in silent interval. To reduce residual noises in silent interval, a detection algorithm of silent interval is proposed. From simulation results, it can be noticed that SNR and MSE of the proposed algorithm are improved than those of Wavelet transform and than those of Wavelet packet transform.

• Journal of the Korea Computer Industry Society
• /
• v.6 no.2
• /
• pp.271-278
• /
• 2005

This paper proposed a new time adapted threshold using the standard deviations of Wavelet coefficients after Wavelet transform by frame scale. The time adapted threshold is set up using the sum of standard deviations of Wavelet coefficient in level 3 approximation and weighted level 1 detail. Level 3 approximation coefficients represent the voiced sound with low frequency and level 1 detail coefficients represent the unvoiced sound with high frequency. After reducing noise by soft thresholding with the proposed time adapted threshold, there are still residual noises in silent interval. To reduce residual noises in silent interval, a detection algorithm of silent interval is proposed. From simulation results, it is demonstrated that the proposed algorithm improves SNR and MSE performance more than Wavelet transform and Wavelet packet transform does.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.8A
• /
• pp.1259-1264
• /
• 1999

In this paper, the High-speed, Low-power Analog-Digital Conversion Archecture is porposed using the Pipelined archecture for High-speed conversion rate and the Successive-Approximation archecture for Low-power consumption. This archecture is the Successive-Approximation archecture using Pipelined Comparator array to change reference voltage during Holding Time. The Analog-to-Digital Converter for video processing is designed using 0.8${\mu}{\textrm}{m}$ CMOS tchnology. When an 6-bit 10MS/s Analog-to-Digital Converter is simulatined, the INL/DNL errors are $\pm$0.5/$\pm$1, respectively. The SNR is 37dB at a sampling rate of 10MHz with 100KHz sine input signal. The power consumption is 1.46mW at 10MS/s. When an 8-bit 10MS/s Analog-to Digital Converter is simulatined, the INL/DNL errors are $\pm$0.5/$\pm$1, respectively. The SNR is 41dB at a sampling rate of 100MHz with 100KHz sine input signal. The power consumption is 4.14m W at 10MS/s.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.2
• /
• pp.140-146
• /
• 1989

An efficient quantization and encoding of BTC (Block Truncation Coding) parameters {($Y_{\alpha},\;Y_{\beta}),\;P_{{\beta}/{\beta}}$} are investigated, In our algorithm 4${\times}$4 blocks are classified into flat or edge block. While edge block is represented by two approximation level $Y_{\alpha},\;Y_{\beta}$ with label plane $P_{{\beta}/{\beta}}$, flat block is represented by single approximation level Y. The approximation levels Y, $Y_{\alpha}$ and $Y_{\beta}$ are encoded by predictive quatization specially designed, and the label plane $P_{{\beta}/{\beta}}$ is tried to be encoded using stored 32 reference plantes. The performance of the proposed scheme has appeared comparable to much more complex transform coding in terms of SNR, although it requires more study on the representation of small slope in background.

• Journal of Communications and Networks
• /
• v.18 no.2
• /
• pp.182-189
• /
• 2016

The focus in this paper is on obtaining tight, simple algebraic-form bounds and invertible expressions for the average symbol error probability (ASEP) of M-ary phase shift keying (MPSK) in a class of composite fading channels. We employ the mixture gamma (MG) distribution to approximate the signal-to-noise ratio (SNR) distributions of fading models, which include Nakagami-m, Generalized-K ($K_G$), and Nakagami-lognormal fading as specific examples. Our approach involves using the tight upper and lower bounds that we recently derived on the Gaussian Q-function, which can easily be averaged over the general MG distribution. First, algebraic-form upper bounds are derived on the ASEP of MPSK for M > 2, based on the union upper bound on the symbol error probability (SEP) of MPSK in additive white Gaussian noise (AWGN) given by a single Gaussian Q-function. By comparison with the exact ASEP results obtained by numerical integration, we show that these upper bounds are extremely tight for all SNR values of practical interest. These bounds can be employed as accurate approximations that are invertible for high SNR. For the special case of binary phase shift keying (BPSK) (M = 2), where the exact SEP in the AWGN channel is given as one Gaussian Q-function, upper and lower bounds on the exact ASEP are obtained. The bounds can be made arbitrarily tight by adjusting the parameters in our Gaussian bounds. The average of the upper and lower bounds gives a very accurate approximation of the exact ASEP. Moreover, the arbitrarily accurate approximations for all three of the fading models we consider become invertible for reasonably high SNR.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.37 no.2
• /
• pp.37-42
• /
• 2000

In this paper, The high-speed, low-Power analog-to-digital conversion structure is proposed using the pipelined comparator away for high-speed conversion rate and the successive- approximation structure for low-power consumption. This structure is the successive-approximation structure using pipelined comparator array to change the reference voltage during the holding time. An 8-bit 10MS/s analog-to-digital converter is designed using 0.8${\mu}{\textrm}{m}$ CMOS technology. The INL/DNL errors are $\pm$0.5/$\pm$1, respectively. The SNR is 41㏈ at a sampling rate of 10MHz with 100KHz sine input signal. The Power consumption is 4.14㎽ at 10MS/s.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.7
• /
• pp.2371-2388
• /
• 2015

In this paper, we investigate the performance evaluation of three dimensional (3D) multiple-input multiple-output (MIMO) systems with an adjustable base station (BS) antenna tilt angle and zero-forcing (ZF) receivers in Ricean/Lognormal fading channels. In particular, we take the lognormal shadow fading, 3D antenna gain with antenna tilt angle and path-loss into account. First, we derive a closed-form lower bound on the sum rate, then we obtain the optimal BS antenna tilt angle based on the derived lower bound, and finally we present linear approximations for the sum rate in high and low-SNR regimes, respectively. Based on our analytical results, we gain valuable insights into the impact of key system parameters, such as the BS antenna tilt angle, the Ricean K-factor and the radius of cell, on the sum rate performance of 3D MIMO with ZF receivers.