• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.235-238
• /
• 2003

Thermo-plastic has generally bad electrical characteristics at high temperature comparing to thermoset-plastics when the plastic apply to electrical power apparatus as an electrical insulator. To solve the problem, we study engineering plastics such as Polyamide and Polyphthalamide as a base resin. And filler of the engineering plastics is glass fiber. Electrical characteristics studied are permittivity, loss factor and breakdown strength according to temperature and frequency of measuring signal. Electrical characteristics of Polyphthalamide has good temperature and frequency dependency comparing to those of Polyamide.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.999-1000
• /
• 2012

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.1591-1592
• /
• 2013

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.339-342
• /
• 1998

A high performance, high-dielectric stripline filter has been developed. The filter consists of planar resonators and its structure is made of high permittivity multilayer ceramic. The performance is distinctive with its attenuation pole. An equivalent lumped circuit is derived to explain the behavior of the attenuation pole quantitatively. A precise design procedure is also described.

• 한국전기전자재료학회논문지
• /
• 제20권12호
• /
• pp.1049-1055
• /
• 2007

Lots of integration work has been done in order to miniaturize the devices for communication. To do this work, one of key work is to get miniaturized inductor with high Q factor for RF circuitry. However, it is not easy to get high Q inductor with silicon based substrate in the range of GHz. Although silicon is well known for its good electrical and mechanical characteristics, silicon has many losses due to small resistivity and high permittivity in the range of high frequency. MEMS technology is a key technology to fabricate miniaturized devices and LTCC is one of good substrate materials in the range of high frequency due to its characteristics of high resistivity and low permittivity. Therefore, we proposed and studied to fabricate and analyze the inductor on the LTCC substrate with MEMS fabrication technology as the one of solutions to overcome this problem. We succeeded in fabricating and characterizing the high Q inductor on the LTCC substrate and then compared and analyzed the results of this inductor with that on a silicon and a glass substrate. The inductor on the LTCC substrate has larger Q factor value and inductance value than that on a silicon and a glass substrate. The values of Q factor with the LTCC substrate are 12 at 3 GHz, 33 at 6 GHz, 51 at 7 GHz and the values of inductance is 1.8, 1.5, 0.6 nH in the range of 5 GHz on the silicon, glass, and LTCC substrate, respectively.

• 한국분말재료학회지
• /
• 제20권2호
• /
• pp.125-128
• /
• 2013

Magnetic and dielectric properties of rubber composites are controlled by using two kinds of high-permeability metal particles with different electrical conductivity (Sendust, Permalloy), and their effect on microwave absorbance has been investigated, focusing on the quasi-microwave frequency band (0.8-2 GHz). Noise absorbing sheets are composite materials of magnetic flake particles of high aspect ratio dispersed in polymer matrix with various filler amount of 80-90 wt.%. The frequency dispersion and magnitude of complex permeability is almost the same for Sendust and Permalloy composite specimens. However, the complex permittivity of the Permalloy composite (${{\varepsilon}_r}^{\prime}{\simeq}250$, ${{\varepsilon}_r}^{{\prime}{\prime}}{\simeq}50$) is much greater than that of Sendust composite (${{\varepsilon}_r}^{\prime}{\simeq}70$, ${{\varepsilon}_r}^{{\prime}{\prime}}{\simeq}0$). Due to the large dielectric permittivity of Permalloy composite, the absorbing band is shifted to lower frequency region. However, the investigation of impedance matching reveals that the magnetic permeability is still small to satisfy the zero-reflected condition at the quasi-microwave frequency band, resulting in a small microwave absorbance lower than 10 dB.

• Elastomers and Composites
• /
• 제34권3호
• /
• pp.247-252
• /
• 1999

보강 및 차수재인 지반용 고무재료를 열융착법에 의해 제조하였으며 환경공학분야에 적용을 위해 성능을 평가하였다. 이들 재료를 제조하는데 스펀본드 폴리에스테르 부직포, 유리섬유매트, 고강력 폴리에스테르사를 이용한 직포형 지오그리드를 기재로, SBS 함유 탄성 bitumen과 아스팔트를 보강재로 각각 사용하였다. 유리섬유 매트와 지오그리드를 기재로 사용한 지반용 재료의 경우 역학적성질이 우수하였으며, 부직포와 탄성 bitumen을 기재로한 경우에는 투수성이 우수하였다. 고무와 아스팔트를 혼합한 경우 연화점은 거의 변화가 없었으며, 고온에서의 치수안정성은 $120^{\circ}C$의 경우 두드러진 수축이 발생하지 않았다. 지반용 고무재료의 자외선에 대한 저항성은 가시적인 변화가 나타나지 않았다.

• 한국전자파학회논문지
• /
• 제27권5호
• /
• pp.486-489
• /
• 2016

논문에서는 corrugation 구조의 적용과 PTFE 테플론(비유전율=2.1) 유전체 렌즈의 삽입을 통하여 우수한 임피던스 매칭 특성과 고이득 성능을 가지는 corrugated 혼 안테나가 제안되었다. 제안된 안테나는 X 밴드(8~12 GHz)에서 -25 dB 이하의 측정 반사손실 성능을 가지고, 중심 주파수인 10 GHz에서 최대 이득이 22.3 dBi이며, 안테나의 전체 크기는 $110mm{\times}110mm{\times}135mm$이다. 제안된 안테나의 성능을 고려하였을 때, 레이더식 레벨 트랜스미터 시스템에 삽입되기에 적합하며, 특히 LNG 및 LPG와 같이 낮은 비유전율 및 반사율을 가지는 물질이 저장된 선박 혹은 해양플랜트 내부의 가스탱크에 적용될 수 있을 것으로 사료된다.

• 한국전자파학회논문지
• /
• 제14권4호
• /
• pp.343-350
• /
• 2003

본 논문은 부분적인 유전체 삽입을 이용하여서 원형편파를 구현한 안테나로 GPS(Global Positioning System) 및 위성라디오 겸용 수신안테나에 대해 연구하였다. 유전체(FR4, $\varepsilon_{{\gamma}}$/=4.7)를 부분적으로 삽입하여 패치의 전기적 길이를 변화시키면서 원형편파를 구현하고 패치의 크기도 줄일 수 있다. 또한 프루브 급전의 좁은 대역폭도 두꺼운 유전체를 부분적으로 사용함으로써 극복할 수 있고 안테나의 높이가 높아지면서 생기는 표면파에 의한 손실을 최소화할 수 있다 이동하는 선박이나 차량에 적용하기 위하여 5개의 안테나를 입체적인 구조로 스위칭 할 수 있는 형태로 안테나 구조를 제안하였다.칭 할 수 있는 형태로 안테나 구조를 제안하였다.

• Journal of Electrical Engineering and Technology
• /
• 제13권5호
• /
• pp.2004-2010
• /
• 2018

We propose a small active antenna to receive Global Navigation Satellite System (GNSS) signals, i.e., Global Positioning System (GPS) L1 (1,575MHz) and Russian Global Navigation Satellite System (GLONASS) L1 (1,600 MHz) signals. A two-stage low-noise amplifier (LNA) with more than 27 dB gain is implemented in the bottom layer of a three-layer antenna package. In addition, a hybrid coupler is used to combine signals from pair of proximately coupled orthogonal feeds with $90^{\circ}$ phase difference to achieve the circular polarization (CP) characteristic. Three layers of high permittivity (${\varepsilon}_r=10$) substrates are stacked and effectively integrated to have a small dimension of $64mm{\times}64mm{\times}7.42mm$ (including both circuit and antenna). The reflection coefficient of the fabricated antenna at the target frequency is below -10 dB, the measured antenna gain is above 26 dBic and the measured noise figure is less than 1.4 dB.