• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2008년도 학술대회 1부
• /
• pp.534-539
• /
• 2008

본 논문은 시력이 떨어지고 보행이 불편한 고령자의 이동을 지원하는 지능형 6족 이동 로봇에 대한 연구이다. 센서 및 소형카메라를 장착한 6족 지능형 이동 로봇은 다양한 보행 및 회전, 이동 속도 조절 등의 이동 능력과 다양한 센서를 이용한 장애물 회피, 위협 상황 인식, 경사보행, 물체영역의 인식 및 추적 등의 기능을 가지며, 로봇에 연결된 선을 이용해 고령자의 보행을 유도한다. 로봇의 안정된 보행을 위한 모터의 제어방법, 센서 및 영상인식을 통한 로봇의 환경인식, 그에 따른 로봇의 지능적이고 능동적인 대응, 감지된 환경정보를 신속하게 무선통신을 통해 필요한 고령자 또는 보호자에게 전송하는 방법 등을 구현하였다. 한 다리에 3자유도를 가진 18관절 6족 로봇으로 구현되어 비평탄 지형에서도 안정된 보행구현은 물론 다양하고 부드러운 동작을 취할 수 있으며 강력한 구동 능력을 위해 디지털 슈퍼토크 서보모터를 사용하였고, 위험 상황 인식을 위해 3축 가속도 센서, PIR(초전)센서, 불꽃센서, 연기센서, 적외선, 초음파 거리감지 센서, 조도센서, 터치센서, 온도/습도 센서, 음성인식센서와 카메라를 통한 영상인식 등을 센서 융합에 의해 구현함으로써 상황인식의 정확도를 높이고 고령자들의 길안내 시 위험을 조기에 예측하여 전달하는 에이전트 역할을 수행하도록 설계되었다.

• 한국정밀공학회지
• /
• 제25권12호
• /
• pp.65-74
• /
• 2008

This paper deals with the path creation for stable action of a robot and transformation by using the fuzzy algorithm. Also, the obstacle detection and environmental analysis are performed by a stereo vision device. The robot decides the range and the height using the fuzzy algorithm. Therefore the robot can be adapted in topography through a transformation by itself. In this paper, the robot is designed to have two advantages. One is the fast movability in flat topography with the use of wheels. The other is the moving capability in uneven ground by walking. It has six leg forms for a stable walk. The wheels are fixed on the legs of the robot, so that various driving is possible. The height and the width of robot can be changed variously using four joints of each leg. The wheeled joint has extra DOF for a rotation of vertical axis. So the robot is able to rotate through 360 degrees. The robot has various sensors for checking the own state. The stable action of a robot is achieved by using sensors. We verified the result of research through an experiment.

• 제어로봇시스템학회논문지
• /
• 제19권12호
• /
• pp.1152-1159
• /
• 2013

This paper proposes an effective walking system for a hexapod robot on uneven terrain. To overcome the deficiencies of two-pair walking systems, which are effective on even terrain, the use of only three legs changes the steps required for movement. The proposed system receives feedback data from switches attached to the bottom of the legs and gyro sensor to carry out stable walking using the Bezier curve algorithm. From the coordinates of the Bezier curve, which guarantees the circular motion of legs, the motor's angle value can be obtained using inverse kinematics. The angle values are sent to each motor though RS-485 communication. If a switch is pushed by the surface during navigation in the Bezier curve pattern, the robot is designed to change its circular course. Through the changed course, each leg can be located on an optimal surface and the wobble phenomenon is reduced by using a normal vector algorithm. The simulation and experiment results show the efficiency of the proposed algorithm.

• Journal of Biosystems Engineering
• /
• 제32권5호
• /
• pp.339-347
• /
• 2007

A hexapod walking robot had been developed for gathering information in the field. The developed robot was $260{\times}260{\times}130$ ($W{\times}L{\times}H$, mm) in size and 14.7 N in weight. The legs had nineteen degrees of freedom. A leg has three rotational joints actuated by small servomotors. Two servomotors placed at ankle and knee played the roles of vertical joint for up and down motions of the leg and the other one placed at coxa played the role of horizontal joint for forward and backward motions. In addition, a servomotor placed at thorax between the front legs and the middle legs played the role of vertical joint for pumping the two front legs to climb stair or inclination. Walking motion of the robot was executed by tripod gait. The robot was controlled by manual remote-controller communicated by an infrared ray. Two controllers were equipped to control the walking of the robot. The sub-controller using PIC microcomputer (Microchips, PIC16F84A) received the 16 bit command signal from the manual remote controller, decoded it to 8bit and transmitted it to the main microcomputer (RENESAS, SH2/7045), which controlled the 19 servomotors using the PWM command signals. Walking speeds were controlled by adjusting the period of command cycle and the stride. Forward walking speed were within 100 cm/min to 300 cm/min. However, experimental walking speed had the error of 4-40 cm/min to compare with the theoretical one, because of slippage of the leg and the circular arc motion of servomotor of coxa.

• 한국생산제조학회지
• /
• 제24권6호
• /
• pp.667-674
• /
• 2015

This paper describes the development of a prototype hexapod robot with six circular legs to overcome a variety of challenging terrains. The legs of the robot are very important for stability during walking, which are analyzed for determining the optimal design parameters through CAE tools. Its control system consists of three types of sensors, microprocessors, and communication modules for PC interface. The entire operation of the robot can be controlled and monitored using a PC. The experimental operations for three different roads verified the feasibility of the prototype robot for carrying out reconnaissance on multi terrain. In the near future, the prototype robot can be used for a military purpose of detecting and informing a potential risk in advance.

• 제어로봇시스템학회논문지
• /
• 제9권11호
• /
• pp.943-951
• /
• 2003

A strategy for fault-tolerant gaits of autonomous legged robots is proposed. A legged robot is considered to be fault tolerant with respect to a given failure if it is guaranteed to be capable of walking maintaining its static stability after the occurrence of the failure. The failure concerned in this paper is a locked joint failure for which a joint in a leg cannot move and is locked in place. If a failed joint is locked, the workspace of the resulting leg is constrained, but legged robots have fault tolerance capability to continue static walking. An algorithm for generating fault-tolerant gaits is described and, especially, periodic gaits are presented for forward walking of a hexapod robot with a locked joint failure. The leg sequence and the formula of the stride length are analytically driven based on gait study and robot kinematics. The transition procedure from a normal gait to the proposed fault-tolerant gait is shown to demonstrate the applicability of the proposed scheme.

• 대한기계학회논문집A
• /
• 제38권9호
• /
• pp.989-997
• /
• 2014

본 논문에서는 6 족 다관절 해저로봇 크랩스터를 위한 정적 보행 알고리즘 설계 방법에 대하여 기술하였다. 정적 보행 알고리즘 설계를 위해 보행계획 벡터와 다리쌍 벡터의 개념을 도입하여 6 족 로봇 보행기법 설계의 편의성과 확장성을 확보하고, 이를 이용하여 수중환경이나 탐사조건에 따라 운용할 수 있는 여섯 가지 정적 보행기법을 설계하였다. 그리고, 공통 제어변수를 사용하여 각 보행 간 자유로운 연동과 자세제어와의 복합보행을 수행할 수 있도록 하였다. 설계된 여섯 가지 정적 보행기법은 시뮬레이션을 통하여 확인하였고, 크랩스터에 적용하여 보행기법 간 연동성과 복합보행 기능 등을 검증하였다.

• 전기전자학회논문지
• /
• 제15권3호
• /
• pp.227-234
• /
• 2011

The Interest in robotics has been steadily increasing in recent times both in Korea as well as abroad. Research on robots for new and diverse fields is ongoing. This study discusses the current research and development on robot actuator, which are used to control the joints of robots, and focuses on developing more efficient technology for joint control, as compared with the current technologies. It also aims to find means to apply the abovementioned technology to diverse industrial fields. We found that easy and effective control of actuators could be achieved by using ZigBee sensor networks, which were widely being used on wireless communications. Throughout the experiments it is proved that the developed wireless actuator could be used for easy control of various robot joints. This technology can be effectively applied to develop two-legged robots that will be able to walk like human, or even quadruped and hexapod robots. It can also be applied to motors used in industry. In this study, we develop an extremely minimized ZigBee sensor network module that can be used to control various servo motors with low power consumption even if it is long distances. We realized effective wireless control by optimizing the ZigBee antenna, and were able to quickly check the status of relevant Tree node through mutual communication between the servo motors composing the ZigBee sensor network and the main server control modules. The developed Servo Motor with ZigBee sensor network modules can be applied in both robotics as well as for home or factory automation.

• 한국지능시스템학회논문지
• /
• 제19권4호
• /
• pp.457-463
• /
• 2009

본 논문에서는 육족 보행 로봇의 새로운 힘 분배 알고리듬을 제안한다. 본 논문에서 고려하는 육족 보행 로봇은 다리 하나에 관절고착고장이 발생하여 내고장성 정적 세다리 걸음새로 보행한다. 제안되는 힘 분배 알고리듬의 핵심은 내고장성 걸음새가 가지는 안정여유도를 결정하는 지지 다리의 미끄러짐을 최소화시키는 것이다. 불연속적으로 움직이는 내고장성 세다리 걸음새는 정상 걸음새보다 안정도가 떨어진다는 약점이 있다. 본 논문에서 제안하는 힘 분배 알고리듬은 이러한 약점을 고려하여 내고장성 걸음새의 지지 다리가 세 개라는 성질과 Zero-Interaction Force 원리를 이용하여 최적화 기법을 쓰지 않고 대수적으로 모든 다리의 힘 성분을 구한다. 컴퓨터 시뮬레이션 사례 연구를 통해서 제안된 힘 분배 알고리듬과 기존 방법의 비교 분석을 실시하고 제안된 방법의 효용성을 입증한다.

• 대한기계학회논문집A
• /
• 제20권7호
• /
• pp.2205-2212
• /
• 1996

In order to move the body of a walking robot translationally, and step over the obstacles, the walking robot must have at least 3 degrees of freedom for each leg. Therefore each leg of the general walking robots can be composed of 3-link system with 3 revolute joints. In this paper, the colsed form of inverse kinimatic solutions is shown for this general 3R linkage. Moreover, in order to have efficient walking volume in rough terrain, the workspace of each log is obtained considering the twist angles and the offsets in D-H parameters. When we design a walking robot, the information of the walking volume is needed for planning desired trajectories of the feet effectively. Appropriate knowledge of the walking volume can also be used to maximize linear or angular velocity of minimize power of stress. However, since it is impossible to obrain the information of walking volume in 3-D space directly from the kinematic equations, the walking volume can be searched through the edge detection algorithm using the triangle tracer with closed from inverse kinematic solutions. In this study, we present the closed form inverse kinematic solutions for 3R linkage model, and the walking volume of 6 legged walking robot which is modeled after the darking bettle, Eleodes obscura sulcipennis, through the method of edge detection for an arbitrary 2 dimensional shape using triangle tracer.