• Bulletin of the Korean Chemical Society
• /
• v.33 no.3
• /
• pp.1078-1080
• /
• 2012

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.201.1-201.1
• /
• 2005

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.9
• /
• pp.989-997
• /
• 2014

In this paper, we describe a design method for the static walking algorithm of a subsea hexapod robot called Crabster (CR200). To design the gait algorithms of a hexapod robot, we propose a design method that uses a gait schedule vector and leg pair vector to secure convenience and expandability. Several walking algorithms are designed that are capable of being applied to CR200 according to the underwater environment and explorative conditions. In addition, gait transition is freely performed between algorithms by applying common control parameters to them. The gait algorithms designed using the proposed method are simulated using MATLAB and validated against the results of experiments.

• Journal of Biosystems Engineering
• /
• v.32 no.5
• /
• pp.339-347
• /
• 2007

A hexapod walking robot had been developed for gathering information in the field. The developed robot was $260{\times}260{\times}130$ ($W{\times}L{\times}H$, mm) in size and 14.7 N in weight. The legs had nineteen degrees of freedom. A leg has three rotational joints actuated by small servomotors. Two servomotors placed at ankle and knee played the roles of vertical joint for up and down motions of the leg and the other one placed at coxa played the role of horizontal joint for forward and backward motions. In addition, a servomotor placed at thorax between the front legs and the middle legs played the role of vertical joint for pumping the two front legs to climb stair or inclination. Walking motion of the robot was executed by tripod gait. The robot was controlled by manual remote-controller communicated by an infrared ray. Two controllers were equipped to control the walking of the robot. The sub-controller using PIC microcomputer (Microchips, PIC16F84A) received the 16 bit command signal from the manual remote controller, decoded it to 8bit and transmitted it to the main microcomputer (RENESAS, SH2/7045), which controlled the 19 servomotors using the PWM command signals. Walking speeds were controlled by adjusting the period of command cycle and the stride. Forward walking speed were within 100 cm/min to 300 cm/min. However, experimental walking speed had the error of 4-40 cm/min to compare with the theoretical one, because of slippage of the leg and the circular arc motion of servomotor of coxa.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.12
• /
• pp.65-74
• /
• 2008

This paper deals with the path creation for stable action of a robot and transformation by using the fuzzy algorithm. Also, the obstacle detection and environmental analysis are performed by a stereo vision device. The robot decides the range and the height using the fuzzy algorithm. Therefore the robot can be adapted in topography through a transformation by itself. In this paper, the robot is designed to have two advantages. One is the fast movability in flat topography with the use of wheels. The other is the moving capability in uneven ground by walking. It has six leg forms for a stable walk. The wheels are fixed on the legs of the robot, so that various driving is possible. The height and the width of robot can be changed variously using four joints of each leg. The wheeled joint has extra DOF for a rotation of vertical axis. So the robot is able to rotate through 360 degrees. The robot has various sensors for checking the own state. The stable action of a robot is achieved by using sensors. We verified the result of research through an experiment.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.6
• /
• pp.667-674
• /
• 2015

This paper describes the development of a prototype hexapod robot with six circular legs to overcome a variety of challenging terrains. The legs of the robot are very important for stability during walking, which are analyzed for determining the optimal design parameters through CAE tools. Its control system consists of three types of sensors, microprocessors, and communication modules for PC interface. The entire operation of the robot can be controlled and monitored using a PC. The experimental operations for three different roads verified the feasibility of the prototype robot for carrying out reconnaissance on multi terrain. In the near future, the prototype robot can be used for a military purpose of detecting and informing a potential risk in advance.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.3 s.309
• /
• pp.16-24
• /
• 2006

In this paper, fault-tolerant gait planning of a hexapod robot for walking over irregular terrain is presented. The failure concerned in this paper is a locked joint failure for which a joint in a leg cannot move and is locked in place. Based on the previously proposed fault-tolerant tripod gait for walking over even terrain, fault-tolerant follow-the-leader(FTL) gaits are proposed for a hexapod robot with a failed leg to be able to walk over two-dimensional rough terrain, maintaining static stability and fault tolerance. The proposed FTL gait can have maximum stride length for a given foot position of a failed leg, and yields better ditch crossing ability than the previously developed gaits. The applicability of the proposed FTL gait is verified by using computer graphics simulations.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.7
• /
• pp.2205-2212
• /
• 1996

In order to move the body of a walking robot translationally, and step over the obstacles, the walking robot must have at least 3 degrees of freedom for each leg. Therefore each leg of the general walking robots can be composed of 3-link system with 3 revolute joints. In this paper, the colsed form of inverse kinimatic solutions is shown for this general 3R linkage. Moreover, in order to have efficient walking volume in rough terrain, the workspace of each log is obtained considering the twist angles and the offsets in D-H parameters. When we design a walking robot, the information of the walking volume is needed for planning desired trajectories of the feet effectively. Appropriate knowledge of the walking volume can also be used to maximize linear or angular velocity of minimize power of stress. However, since it is impossible to obrain the information of walking volume in 3-D space directly from the kinematic equations, the walking volume can be searched through the edge detection algorithm using the triangle tracer with closed from inverse kinematic solutions. In this study, we present the closed form inverse kinematic solutions for 3R linkage model, and the walking volume of 6 legged walking robot which is modeled after the darking bettle, Eleodes obscura sulcipennis, through the method of edge detection for an arbitrary 2 dimensional shape using triangle tracer.

• Journal of IKEEE
• /
• v.15 no.3
• /
• pp.227-234
• /
• 2011

The Interest in robotics has been steadily increasing in recent times both in Korea as well as abroad. Research on robots for new and diverse fields is ongoing. This study discusses the current research and development on robot actuator, which are used to control the joints of robots, and focuses on developing more efficient technology for joint control, as compared with the current technologies. It also aims to find means to apply the abovementioned technology to diverse industrial fields. We found that easy and effective control of actuators could be achieved by using ZigBee sensor networks, which were widely being used on wireless communications. Throughout the experiments it is proved that the developed wireless actuator could be used for easy control of various robot joints. This technology can be effectively applied to develop two-legged robots that will be able to walk like human, or even quadruped and hexapod robots. It can also be applied to motors used in industry. In this study, we develop an extremely minimized ZigBee sensor network module that can be used to control various servo motors with low power consumption even if it is long distances. We realized effective wireless control by optimizing the ZigBee antenna, and were able to quickly check the status of relevant Tree node through mutual communication between the servo motors composing the ZigBee sensor network and the main server control modules. The developed Servo Motor with ZigBee sensor network modules can be applied in both robotics as well as for home or factory automation.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.1 no.2
• /
• pp.91-93
• /
• 2000

Insects have many excellent features and functions in their small bodies, such as hexapod walking, flapping flight, vision systems, sensory hairs, etc, and those characteristics can be thought as good models for many types of robots. Insects also will be good models far micro-machines because of its size. Insect behavior consists of simple reflex acts and programmed behavior, Some robots were made in order to clarify the emergent mechanism of insect behavior, Through some experiments it would be found that even if insect behavior consists of some simple action patterns, it looks intelligent through interactions its sensors and actuators with its complex environment. In the near futures small robots inspired by insects will be used in many fields of our life. I hope that insect-model based robots will play an active part in many fields and that they will make us happy.