• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제20회 춘계학술대회 논문집
• /
• pp.249-252
• /
• 2003

음향불안정을 억제하는 수동제어기구중 하나인 음향공의 음향학적 효과를 파악하기 위해, 음향공이 장착된 로켓엔진 연소실의 음향장 특성을 수치해석적으로 조사하였다. 음향공 모델로서 Helmholtz 형태의 공명기가 채택되었고, 조화해석을 통해 주로 음향공에 의해 야기되는 음향학적 효과를 관찰하였다. 음향공의 동조주파수를 변화시켜가면서 연소실의 음향진동 응답을 구하고, 제1접선방향 음향모드의 감쇠인자를 구하였다. 동조주파수가 공진주파수에 접근함에 따라 모드분할 현상이 나타났고, 이로 인해 음향공을 본래의 제1접선방향 음향모드에 동조시키더라도 음향감쇠효과가 저하됨을 알았다. 효과적인 감쇠를 위해서는, 억제하고자 하는 음향모드로부터 모드분할 현상이 나타나지 않으면서 그 음향모드의 감쇠효과를 극대화하도록 음향공을 동조시키는 것이 바람직함을 알 수 있었다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.404-409
• /
• 2007

For a hermetic reciprocating compressor, it has been known that the gas pulsation in the suction line affects the compressor performance, and suction muffler design has been focused on both of noise reduction and minimum pressure drop across the muffler. Some studies have been carried out on the mutual interaction between the gas pulsation and the cylinder pressure to investigate some supercharging effects, but their efforts were limited on rather simple geometries. In this paper, interaction of the gas pulsation in the compressor suction line with cylinder pressure via suction valve motion has been calculated; for the gas pulsation analysis, modeling of Helmholtz resonators in series was used, and for cylinder pressure calculation, energy equations was set up for the gas inside the cylinder. For demonstration of this calculation method, four different types of suction line configurations for a hermetic reciprocating compressor were compared in terms of compressor performance and gas pulsation level.

• 한국소음진동공학회논문집
• /
• 제17권12호
• /
• pp.1223-1229
• /
• 2007

Flow traveling over a cavity opening forms a vortex due to unstable shear layer and induces an aerodynamic pressure excitation from the diffusion of the vortex convecting out of the trailing edge of the opening. The interaction between the excitation force and the cavity response sustains resonance in the resonator(cavity) and locked-in vortex shedding at the leading edge of the opening. The aerodynamic excitation force can be described from the diffusion of the vortex over the trailing edge and the level of its diffusivity is related to the strength of vorticity seeded at the leading edge. In this study, the control scheme of the internal pressure oscillation was proposed from regulating the vorticity at the leading edge by use of an oscillating spoiler. It was found that the relative motion between the spoiler and the air mass at the cavity opening influenced vorticity strength and the control was achieved by direct feedback of the cavity pressure fluctuation to the actuator.

• 한국음향학회지
• /
• 제15권6호
• /
• pp.52-58
• /
• 1996

음파와 진동에너지를 활용하는 음파기술의 응용 연구분야로 음향공진 및 맥진동 현상을 이용하여 기액상에서 산소절달효율을 극대화 할 수 있는 폐수처리용 음향공진 산기관의 개념을 제안하였으며 원리와 성능시험을 수행하였다. 또한 저압용 헬름흘쯔 공진기, 실린더형 및 고리형 반사공진기 그리고 복합 공진시스템의 설계개념과 원리를 구현하였다. 물질전달 과정을 촉진하는 음향공진 에너지는 산소전달효율을 높여주며, 노즐에서 분출하는 공기 제트의 불평형에 의해 발생하는 주기적인 맥진동 현상은 미세한 공기방울을 만들어 내는데, 이 두가지 원리가 가장 잘 적용되는 고리형 반사공진기(AJR)의 성능이 가장 우수한 것으로 평가되었으며 기존의 산기관 보다도 $20{\sim}30%$ 정도 높은 효율을 실험으로 확인하였다.

• 동력기계공학회지
• /
• 제12권1호
• /
• pp.13-19
• /
• 2008

In this study, a variable induction and exhaust system is applied to turbocharged diesel engine to improve the volumetric efficiency, especially, in a low and transient engine speed range where much of the pollutant matters are expelled out. The volumetric efficiency is known as one of the most important factor which affects significantly engine performance, fuel economy and further emission and noise level. As the torque increase with the engine speed up, the gas flow in an exhaust pipe become pulsating and then has an effect on boost up capacity of air charging into the cylinder and expelling capacity to atmosphere simultaneously. But at a low and idling speed, the pulsation effect was not so significant. Accordingly, resonator was employed to compensate their loss. The variable induction system consists of the secondary pipe, resonator, intercooler, and torque variance were examined with extended operating conditions. In the mean time, for interpretation and well understanding for the phenomena of wave action that arising during intake and exhaust process between turbocharger and variable intake system, the concept of the combined supercharging was introduced. Some of results are depicted which deal with a pressure history during valve events of induction process. Consequently, by the governing of these phase and amplitude of pulsating wave, it enables us to estimate and evaluate for the intake system performance and also, designing stage of the system layout.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 추계학술대회 논문집
• /
• pp.421-426
• /
• 2010

With hydraulic noise test facility, a variety of tests were performed to investigate the pulsation pressure generation mechanism and its transmission characteristics and to derive the noise control methodology. Many experiments were carried out by changing average pressure, flow rate, pump speed, hose length and MCV spool condition. From the test results, the correlations between pulsation pressure and other design parameters, such as static pressure, flow rate and MCV spool opening area and length of hose, were found out. And also each contribution factors were evaluated from the regression analysis. By changing hose length, the pulsation pressure resonance phenomenon was investigated. In order to find out the pulsation pressure reduction measures pulsation pressure analysis, such as pulsation pressure of hydraulic pump itself and pulsation pressure of hydraulic system, by using AMESim were studied. In addition hydraulic silencer was developed based on the Helmholtz resonator. And its performance was evaluated by installing the silencer at the excavator.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.786-789
• /
• 2005

An acoustic total or partial enclosure is widely used to reduce the sound pressure level propagating from a noise source. However, the performance of the acoustic enclosure is decreased by its inherent limitations such as temperature rise or acoustic pressure build up inside the enclosed acoustic field. In general, a silencer is installed to overcome these limitations, for large amount of air can be exchanged through the silencers. In this reason, a parallel baffle type duct silencer with acoustic resonators is studied to reduce the transmitted noise from a transformer. In this silencer, the high frequency components of the transmitted noise over 360Hz are effectively absorbed by the parallel baffles and the other ones, 120 and 240 Hz, are reduced due to the presence of Helmholtz resonators. Large sound attenuation is achieved by applying the sound resonating barrier to the large transformers in a substation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1104-1108
• /
• 2007

Automobile sunroof buffeting is the tonal noise of low frequency around 20Hz. It occurs due to the acoustic feedback process between the shear layer detached from the leading edge of sunroof opening and the Helmholtz resonator-like property of a car cabin. In this paper, PIV visualization technique is applied to the unsteady flow field around sunroof opening of an SUV in the full-scale automotive wind tunnel in order to find out buffeting mechanism. A phase-marking PIV measurement method, in which image and sound pressure are recorded simultaneously, and a phase-rearrangement post-processing program were developed for capturing noise-related velocity fields without expensive synchronization systems. Through this study, some characteristics of the real-car sunroof shear layers under various deflector conditions were identified and these results can provide insights into the noise reduction mechanism of the tube-type deflector.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2004년도 추계학술발표대회논문집 제23권 2호
• /
• pp.279-282
• /
• 2004

산조 가야금의 경우 몸체의 뒷판에 세 개의 구멍(공명혈)이 있다. 이 구멍은, 몸체를 일정한 부피를 가진 용기로 보았을 때, 그 용기의 입구의 단면적, 다시 말해, 헬름홀츠 공진기 (Helmholtz Resonator) 입구의 단면적과 같다. 본 논문에서는 이 공명혈의 역할을 알아보기 위해, 1) 우선 기성의 산조 가야금 몸체의 세 공명혈을 모두 막은 상태, 일부만 막은 상태, 열려있는 상태에서의 몸체의 충격응답 전달함수를 측정, 분석하여 개략적으로 알아보았고, 이어서 2) 뒷판에 구멍이 전혀 없는 실험용의 산조 가야금 몸체의 제작을 의뢰하여, 뒷판 중앙에 구멍을 점차적으로 넓게 뚫어가면서, 각 단계별로 몸체의 충격응답을 측정하여, 구멍의 크기와 몸체의 충격응답 전달특성 변화 간의 상관관계를 분석 해보았다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.220-223
• /
• 2007

Acoustic test of the payload fairing of Korea satellite launch vehicle was conducted to verify the performance of acoustic protection system installed inside the payload fairing. This paper briefly introduces the acoustic test procedures and its results. Overall 148 dB acoustic loads were exerted on the payload fairing structures which mated with the upper stage structure of the launch vehicle. In order to verify the increase of insertion loss by the acoustic protection system, two kinds of test were performed. One is conducted with acoustic protection system and the other without acoustic protection system. Internal acoustic loads as well as external ones were measured and the measured insertion losses were compared with the requirement. The results showed that the acoustic protection system increases the insertion loss by more than 6 dB above 125 Hz. They also indicated that some design modification of Helmholtz resonator array is required to increase the insertion loss at a cavity resonant frequency.