• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.3
• /
• pp.35-47
• /
• 2018

Tree height is information that is used as a parameter for variety of tasks related to forests. Specifically, customized topics related to forests such as afforestation map are also used for production. In order to calculate tree height information, a field survey or drawing was using aerial photographs. However, there is a problem that is costing a lot of time and money. Therefore, it was suggested to calculate tree height using aerial photographs taken every two years. Thus, the method for calculating tree heights was validated by unmanned aerial photogrammetry, and tree heights were calculated using outputs generated by unmanned aerial photogrammetry applied to the unmanned aerial photograph and Aerial photograph DB. The comparison of calculated tree heights shows that the measures proposed in this study are efficient. and We expect to improve the usability of aerial photographs DB.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.2
• /
• pp.127-136
• /
• 2002

DEM(Digital Elevation Model) is used widely in image processing, water resources, construction, GIS, landscape architecture, telecommunication, military operations and other related areas. And it is used especially in producing ortho-photo based on specific DEM and developing 3D GIS database vividly. As LiDAR(Light and Detection And Ranging) system emerged recently, DEM could be developed in urban area more efficiently and more economically, compared to the conventional DEM Production. Traditional method using check points for elevation has tome limitations in structure's height accuracy by LiDAR, because it uses only terrain height. Accordingly after the downtown of Chungju city was selected as a test field in this paper and DEM and digital ortho images was produced by way of LiDar survey, the accuracy was evaluated through analytical plotting map. The result shows that in case of buildings in LiDAR DEM, the accuracy is 0.30 m in X, 0.62 m in Y and RMS is 1.17 m. The difference distribution between DEM and plotting map in range of $\pm$10 cm was 36.2% and $\pm$10 cm $\pm$20 cm was 43.53%. The accuracy of LiDAR in this study meets 1/5,000 which is the regulation for map of NGI(National Geography Institute) and LiDAR can be possibly used in many other applied area.

• Korean Journal of Remote Sensing
• /
• v.39 no.1
• /
• pp.47-63
• /
• 2023

Unmanned aerial vehicle (UAV) and sensor technologies are rapidly developing and being usefully utilized for spatial information-based agricultural management and smart agriculture. Until now, there have been many difficulties in obtaining production information in a timely manner for large-scale agriculture on reclaimed land. However, smart agriculture that utilizes sensors, information technology, and UAV technology and can efficiently manage a large amount of farmland with a small number of people is expected to become more common in the near future. In this study, we evaluated the productivity of forage maize grown on reclaimed land using UAV and sensor-based technologies. This study compared the plant height, vegetation cover ratio, fresh biomass, and dry biomass of maize grown on general farmland and reclaimed land in South Korea. A biomass model was constructed based on plant height, cover ratio, and volume-based biomass using UAV-based images and Farm-Map, and related estimates were obtained. The fresh biomass was estimated with a very precise model (R² =0.97, root mean square error [RMSE]=3.18 t/ha, normalized RMSE [nRMSE]=8.08%). The estimated dry biomass had a coefficient of determination of 0.86, an RMSE of 1.51 t/ha, and an nRMSE of 12.61%. The average plant height distribution for each field lot was about 0.91 m for reclaimed land and about 1.89 m for general farmland, which was analyzed to be a difference of about 48%. The average proportion of the maize fraction in each field lot was approximately 65% in reclaimed land and 94% in general farmland, showing a difference of about 29%. The average fresh biomass of each reclaimed land field lot was 10 t/ha, which was about 36% lower than that of general farmland (28.1 t/ha). The average dry biomass in each field lot was about 4.22 t/ha in reclaimed land and about 8 t/ha in general farmland, with the reclaimed land having approximately 53% of the dry biomass of the general farmland. Based on these results, UAV and sensor-based images confirmed that it is possible to accurately analyze agricultural information and crop growth conditions in a large area. It is expected that the technology and methods used in this study will be useful for implementing field-smart agriculture in large reclaimed areas.

• Journal of Advanced Navigation Technology
• /
• v.24 no.5
• /
• pp.343-347
• /
• 2020

This paper presents the development of a software for tracking the location of objects in the water and for creating a three-dimensional hull map. The objective of this software, as a software for underwater hull cleaning robot, is to map the location of underwater hull cleaning robot and to locate the position of sensor by identifying the shaded area of acoustic communication. For the software designed for mapping the location of cleaning robot in the water, the height and intensity were applied as variables for underwater ultrasonic communication. The software for creating a three-dimensional hull was developed by OpenGL using scanned lines from a blueprint of a ship. This software can help identifying the location of underwater hull cleaning robot without actual visibility and can be used to maintain a stable communication status by locating the position of sensor by easily spotting the shaded area of acoustic communication caused by the curved area of the bottom of the ship.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.106-109
• /
• 2006

Over the years, many researches have been performed to create 3D digital maps. Nevertheless, it is still time-consuming and involves a high cost because a large part of 3D digital mapping is conducted manually. To compensate this limitation, we propose methodologies to represent 3D objects as 3D symbols and locate these symbols into a base map automatically. First of all, we constructed the 3D symbol library to represent 3D objects as 3D symbols. In the 3D symbol library, the attribute and geometry information are stored, which defines factors related to the types of symbols and related to the shapes respectively. These factors were used to match 3D objects and 3D symbols. For automatic mapping of 3D symbols into a base map, we used predefined parameters such as the size, the height, the rotation angle and the center of gravity of 3D objects which are extracted from Light Detection and Ranging (LIDAR) data and 2D digital maps. Finally, the 3D map in urban area was constructed and the mapping results were tested using aerial photos as reference data. Through this research, we can identify that the developed the algorithms can be used as effective techniques for 3D digital cartographic techniques

• Journal of the Korean Solar Energy Society
• /
• v.36 no.4
• /
• pp.21-29
• /
• 2016

Commercial wind farm design tools and the national wind map are used to determine the implementation potential of offshore wind power in Korea in this study. For this, the territorial waters of Korea were divided into nine analysis regions and a commercial CFD code was used to obtain wind resource maps at 100m A.S.L. which is the hub height of a 5MW wind turbine used in this study. With the wind resource obtained, factors including water depth, distance from substations, minimum and maximum capacity of a wind farm, distance between turbines and wind farms were considered to determine wind power potential. Also, the conservation areas, military zones, ports, fishing grounds, etc. were considered and excluded. As the result, a total capacity of 6,720 MW was found to be the implementation potential and this corresponds to $3.38MW/km^2$ in API. Also if the distance from the substation is not considered, the potential increased to be 10,040 MW. This offshore wind farm potential is considered enough to satisfy the target of wind farm capacities in the 7th national plan for electricity demand and supply.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.1
• /
• pp.49-62
• /
• 2005

The VR (virtual reality) simulator such as helicopter simulation needs virtual environment of existing urban area. But the real urban environment keeps changing. We need a modeling method to make use of the GIS data that are updated periodically. The flight simulation needs to visualize not only buildings in near distance but also a large number of buildings in the far distance. We propose a method for modeling urban environment from aerial image and digital map with a comparatively small manual work. Image based modeling is applied to urban model which considers the characteristic of Korean cities. Buildings in the distance can be presented without creating a lot of polygons. Proposed method consists of the pre-processing stage which prepares the model from the GIS data and the modeling stage which makes the virtual urban environment. The virtual urban environment can be modeled with the simple process which utilizes the height map of buildings.

• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.4
• /
• pp.97-102
• /
• 2007

Recently, coastal damage according to the natural disaster like storm-surge, overflowing of the sea has been massively increased. In case of earth fill at the seaside, there are a lot of weak areas of the natural disaster and it has also high possibility that a large disaster happens. Thus flood expectation map in the reclaimed land using 3D spatial information was produced in this study. The area around Myungji, Kangsugu, Busan which was made with the large scale earth fils at the seaside was designated as a study area. Observation of both costal datum and ground height using the tidal date and field surveying dates was conducted. Terrain model using the GIS program was produced and than 3D building model was produced using 3D MAX. It was shown that there are possibility more than 50% if over 4.5m storm-surge is happening, as a result of calculating the virtual flooded area on the produced cartographic map.

• Nuclear Engineering and Technology
• /
• v.54 no.11
• /
• pp.4195-4208
• /
• 2022

In this study, operator habitability was numerically evaluated in the event of a fire at the main control bench board (MCB) in a reference main control room (MCR). It was investigated if evacuation variables including hot gas layer temperature (HGLT), heat flux (HF), and optical density (OD) at 1.8 m from the MCR floor exceed the reference evacuation criteria provided in NUREG/CR-6850. For a fire model validation, the simulation results of the reference MCR were compared with existing experimental results on the same reference MCR. In the simulation, various input parameters were applied to the MCB panel fire scenario: MCR height, peak heat release rate (HRR) of a panel, number of panels where fire propagation occurs, fire propagation time, door open/close conditions, and mechanical ventilation operation. A specialized-average HRR (SAHRR) concept was newly devised to comprehensively investigate how the various input parameters affect the operator's habitability. Peak values of the evacuation variables normalized by evacuation criteria of NUREG/CR-6850 were well-correlated as the power function of the SAHRR for the various input parameters. In addition, the evacuation time map was newly utilized to investigate how the evacuation time for different SAHRR was affected by changing the various input parameters. In the previous studies, it was found that the OD is the most dominant variable to determine the MCR evacuation time. In this study, however, the evacuation time map showed that the HF is the most dominant factor at the condition of without-mechanical ventilation for the MCR with a partially-open false ceiling, but the OD is the most dominant factor for all the other conditions. Therefore, the method using the SAHRR and the evacuation time map was very useful to effectively and comprehensively evaluate the operator habitability for the various input parameters in the event of MCB fires for the reference MCR.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.3
• /
• pp.117-126
• /
• 2018

Due to intelligent transport systems, location-based applications, and augmented reality, demand for image maps and 3D (Three-Dimensional) maps is increasing. As a result, data acquisition using UAV (Unmanned Aerial Vehicles) has flourished in recent years. However, even though orthophoto map production and research using UAVs are flourishing, few studies on 3D modeling have been conducted. In this study, orthophoto and 3D modeling research was performed using various angle images acquired by a UAV. For orthophotos, accuracy was evaluated using a GPS (Global Positioning System) survey that employed VRS (Virtual Reference Station) acquired checkpoints. 3D modeling was evaluated by calculating the RMSE (Root Mean Square Error) of the difference between the outline height values of buildings obtained from the GPS survey to the corresponding 3D modeling height values. The orthophotos satisfied the acceptable accuracy of NGII (National Geographic Information Institute) for a 1/500 scale map from all angles. In the case of 3D modeling, models based on images taken at 45 degrees revealed better accuracy of building outlines than models based on images taken at 30, 60, or 75 degrees. To summarize, it was shown that for orthophotos, the accuracy for 1/500 maps was satisfied at all angles; for 3D modeling, images taken at 45 degrees produced the most accurate models.