Nuclear Engineering and Technology

Korean Nuclear Society (한국원자력학회)
권호 표지
DOI QR코드

DOI QR Code

Habitability evaluation considering various input parameters for main control benchboard fire in the main control room

  • Byeongjun Kim (Dept. of Mechanical Engineering, Chungnam National University) ;
  • Jaiho Lee (Department of Reactor System Evaluation, Korea Institute of Nuclear Safety) ;
  • Seyoung Kim (Dept. of Mechanical Engineering, Chungnam National University) ;
  • Weon Gyu Shin (Dept. of Mechanical Engineering, Chungnam National University)
  • Received : 2022.01.20
  • Accepted : 2022.07.09
  • Published : 2022.11.25
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, operator habitability was numerically evaluated in the event of a fire at the main control bench board (MCB) in a reference main control room (MCR). It was investigated if evacuation variables including hot gas layer temperature (HGLT), heat flux (HF), and optical density (OD) at 1.8 m from the MCR floor exceed the reference evacuation criteria provided in NUREG/CR-6850. For a fire model validation, the simulation results of the reference MCR were compared with existing experimental results on the same reference MCR. In the simulation, various input parameters were applied to the MCB panel fire scenario: MCR height, peak heat release rate (HRR) of a panel, number of panels where fire propagation occurs, fire propagation time, door open/close conditions, and mechanical ventilation operation. A specialized-average HRR (SAHRR) concept was newly devised to comprehensively investigate how the various input parameters affect the operator's habitability. Peak values of the evacuation variables normalized by evacuation criteria of NUREG/CR-6850 were well-correlated as the power function of the SAHRR for the various input parameters. In addition, the evacuation time map was newly utilized to investigate how the evacuation time for different SAHRR was affected by changing the various input parameters. In the previous studies, it was found that the OD is the most dominant variable to determine the MCR evacuation time. In this study, however, the evacuation time map showed that the HF is the most dominant factor at the condition of without-mechanical ventilation for the MCR with a partially-open false ceiling, but the OD is the most dominant factor for all the other conditions. Therefore, the method using the SAHRR and the evacuation time map was very useful to effectively and comprehensively evaluate the operator habitability for the various input parameters in the event of MCB fires for the reference MCR.

Keywords

References

  1. U.S. NRC, Verification and Validation of Selected Fire Models for Nuclear Power Plant Applications", NUREG 1824, United States Nuclear Regulatory Commission, Washington, D.C., 2007. 
  2. U.S. NRC, EPRI/NRC-RES Fire PRA Methodology for Nuclear Power Facilities Detailed Methodology (No. NUREG/CR-6850, EPRI 1011989 Final Report)", ume 2, U.S. Nuclear Regulatory Commission, Rockville, MD, USA, 2005. 
  3. U.S. NRC, Fire Protection for Nuclear Power Plants, Regulatory Guide 1.189, US Nuclear Regulatory Commission, Washington, DC, USA, 2009. 
  4. D.I. Kang, K. Kim, S.C. Jang, S.Y. Yoo, Fire simulations for the abandonment risk assessment of main control room fire in domestic nuclear power plant, Journal of The Korean Society of Safety 29 (4) (2014) 199-207.  https://doi.org/10.14346/JKOSOS.2014.29.4.199
  5. Y.H. Jung, D.I. Kang, A Study on Fire Modeling of Main Control Benchboard Fire Scenarios for Evaluation of Main Control Room Habitability Conditions", Transactions of the Korean Nuclear Society Autumn Meeting, 2019, pp. 9-10. 
  6. D.I. Kang, Y.H. Jung, Risk Assessment of Main Control Room Fires for Domestic NPP Based on NUREG-2178", Transactions of the Korean Nuclear Society Virtual Spring Meeting, 2020. 
  7. H.S. Han, J.O. Lee, C.H. Hwang, J. Kim, S. Lee, Assessment of the habitability for a cabinet fire in the main control room of nuclear power plant using sensitivity analysis, Fire Science and Engineering 31 (2) (2017) 52-60.  https://doi.org/10.7731/KIFSE.2017.31.4.052
  8. L. Sun, K. Podila, Q. Chen, A.M. Bayomy, Y.F. Rao, Computational fluid dynamics modeling of fire and human evacuation for nuclear applications, Journal of Nuclear Engineering and Radiation Science 6 (1) (2020). 
  9. U.S. NRC, Nuclear Power Plant Fire Modeling Analysis Guidelines", NUREG-1934, United States Nuclear Regulatory Commission, Washington, D.C., 2012. 
  10. Morgan J. Hurley, et al., SFPE Handbook of Fire Protection Engineering", Springer, 2015. 
  11. A.F. Abd El-Aal, A. Zaghloul, M.M. Kandil, Safest and shortest exit algorithm for NPP fire evacuation, Applied Engineering 5 (1) (2021). 
  12. I.H. Kim, M. Kim, A.R. Cho, Effect of HVAC operation during the fire in the control room, in: Proceedings of 2019 Spring Annual Conference, Korean Institute of Fire Science & Engineering, 2019, pp. 73-74. 
  13. U.S.NRC-RES and EPRI, Refining and characterizing heat release rates from electrical enclosures during fire (RACHELLE-FIRE), in: Peak Heat Release Rates and Effect of Obstructed Plume", NUREG-2178 Vol. 1 and EPRI 3002005578, vol. 1, U.S.NRC-RES and EPRI, 2015. 
  14. N. Iqbal, M.H. Salley, Fire dynamics tools (FDTs); quantitative fire hazard analysis methods for the U.S. Nuclear regulatory commission fire protection inspection program, NUREG-1805 (Final Report), U.S.NRC (2004). 
  15. NRC, US., Verification and validation of selected fire models for nuclear power plant applications-final report (No. NUREG-1824, supplement 1), 2016. 
  16. R.D. Peacock, K.B. McGrattan, G.P. Forney, P.A. Reneke, CFAST-Consolidated Model of Fire Growth and Smoke Transport, vol. 1, Technical Reference Guide", 2015, Version 7.