• 대한원격탐사학회지
• /
• 제36권2_2호
• /
• pp.325-335
• /
• 2020

식생 높이는 높이-탄소식생량 추정 모델을 이용하여 식생탄소량은 측정하는데 사용된다. 접근이 힘든 지역의 망그로브 생태는 현장 자료를 취득하는데 어려움이 있으며, 제한적인 현장 자료로부터 대규모 식생량 및 탄소양모델을 연구하는데 한계점이 있다. 능동형과 수동형 원격탐사 기법이 망그로브 식생 연구에 활용되고 있으나, 공간 해상도의 한계로 인해 작은 규모의 특징을 감지하는데 문제가 있다. 이 논문에서는 TanDEM-X 자료를 이용하여 SRF 지역 12 m 공간 해상도 망그로브 식생 높이 분포를 측정하였다. 단일 편파를 사용하였지만, 수면과 망그로브 식생 사이에서 일어나는 이중 반사 현상을 이용하여 망그로브 숲 지역의 수면의 높이를 측정하여 식생 높이를 측정하는 새로운 인버젼 모델을 사용하였다. TanDEM-X 식생 높이 결과를 모자이크하여 SRF 전 지역의 대규모 식생 높이 지도를 제작하였다. 현장 자료와 검증한 결과 상관계수 0.83, RMSE 0.84 m로 나타났다. 전 세계를 관측한 TanDEM-X 자료를 이용하면, 고해상도 글로벌 망그로브 식생 높이 지도 제작이 가능함을 보여주었다. 이러한 결과들은 망그로브 식생탄소량 및 탄소 순환을 이해하는데 중요한 역할을 할것으로 기대된다.

• 전자공학회논문지B
• /
• 제30B권9호
• /
• pp.64-75
• /
• 1993

This paper proposes a recovering technique of the elevation map by stereo modeling of the aerial image sequence which is transformed based on the aircraft situation. The area-based stereo matching method is simulated and the various parameters are experimentally chosen. In a depth extraction step, the depth is determined by solving the vector equation. The equation is suitable for stereo modeling of aerial images which do not satisfy the epipolar constraint. Also, the performance of the conventional feature-based matching scheme is compared. Finally, techniques analyzing the accuracy of the recovered elevation map (REM) are described. The analysis includes the error estimation for both height and contour lines, where the accuracy is based on the measurements of deviations from the estimates obtained manually. The experimental results show the efficiency of the proposed technique.

• 한국생산제조학회지
• /
• 제9권5호
• /
• pp.58-64
• /
• 2000

This paper proposes a method for determining optimal EDM parameters based on discharge area from the physical model of a tool electrode. Main parameters, which affect the EDM performance, are peak value of currents, pulse-on time, and pulse-off time. Such parameters are closely dependent on the discharge area in EDM process. In this paper the discharge area is estimated from the CMM scanning data to the tool electrode. The method is very useful when any geometric information to the tool electrode is not provided from tool modeler or producer. The method consists of following four steps. First a triangulation mesh is constructed from the CMM data. Secondly, the z-map is modeled from the triangulated mesh. Thirdly, the discharge area is estimated from intersection between the z-map model and a z-height plane. Finally, the machining parameters are easily calculated by some known EDM equations to the discharge area. An example is introduced to show that the machining parameters are calculated from the CMM data to a tool electrode.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.41-44
• /
• 2008

In this paper, major species of tree were discriminated in compartment by using LiDAR data and optic imagery. This is an important work in forest field. A current digital stock map has created the aerial photo and collecting survey data. Unlike high resolution imagery, LiDAR data is not influenced by topographic effects since it is an active sensory system. LiDAR system can measure three dimension information of individual tree. And the main methods of this study were to extract reliable the individual tree and analysis techniques to facilitate the used LiDAR data for calculating tree crown 2D parameter. We should estimate the forest inventory for calculating parameter. 2D parameter has need of area, perimeter, diameter, height, crown shape, etc. Eventually, major species of tree were determined the tree parameters, compared a digital stock map.

• Wind and Structures
• /
• 제2권1호
• /
• pp.51-68
• /
• 1999

Applying and extending some preceding researches, this paper proposes a map of Italian extreme winds assigning the reference velocity, i.e., the wind velocity averaged over 10 minutes, at 10 m height, in a flat open terrain, with 50 years mean return period, depending on the site and the altitude. Furthermore, an objective criterion is formulated by which the actual values of the local wind velocity are given as a function of the reference velocity. The study has been carried out in view of the revision of the Italian Standards dealing with safety and loads and the introduction of the aeolic Italian map into Eurocode 1.

• 한국도로학회논문집
• /
• 제17권4호
• /
• pp.63-68
• /
• 2015

PURPOSES : A study on the efforts to minimize the road traffic noise has been underway. An attempt has been made to measure the noise level using a noise map; however, the attempt is limited to certain areas only. In general, a noise barrier is employed to prevent road traffic noise; however, unplanned noise barriers developed without considering the surrounding environment, including excessively high walls, cause problems such as infringement on prospect right. Noise ceiling at daytime in Korea is 68 dB(A), which is relatively higher than in other countries. METHODS: The noise barrier used mainly for road noise reduction was analyzed to estimate the optimal height. Related variables such as road width, the height of the upper part, distance to the building, and angle (for instance, $30^{\circ}$). RESULTS : A formula to calculate the optical height of the noise barrier, considering the road environment (i.e., parameters such as road width and distance to building), was developed in this study in an attempt to mitigate the noise generated from the road. CONCLUSIONS : The formula to calculate the noise barrier is expected to lead to cost saving, accurate installation of barriers, and protection of the right of prospect.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권9호
• /
• pp.3196-3210
• /
• 2014

This paper presents a novel video metrology approach based on robust tracking. From videos acquired by an uncalibrated stationary camera, the foreground likelihood map is obtained by using the Codebook background modeling algorithm, and the multiple moving objects are tracked by a combined tracking algorithm. Then, we compute vanishing line of the ground plane and the vertical vanishing point of the scene, and extract the head feature points and the feet feature points in each frame of video sequences. Finally, we apply a single view mensuration algorithm to each of the frames to obtain height measurements and fuse the multi-frame measurements using RANSAC algorithm. Compared with other popular methods, our proposed algorithm does not require calibrating the camera, and can track the multiple moving objects when occlusion occurs. Therefore, it reduces the complexity of calculation and improves the accuracy of measurement simultaneously. The experimental results demonstrate that our method is effective and robust to occlusion.

• 새물리
• /
• 제68권11호
• /
• pp.1275-1280
• /
• 2018

We demonstrated transmission direct phase-measuring deflectometry (DPMD) with a specular phase object having discontinuous surfaces by using two displays and a two-dimensional array detector for display and by recording the distorted fringe patterns. Three-dimensional (3D) information was obtained by calculating the height map directly from the phase information. We developed a mathematical model of the phase-height relationship in transmission DPMD. Unlike normal transmission deflectometry, this method supports height measurement directly from the phase. Compared with other 3D measurement techniques such as interferometry, this method has the advantages of being inexpensive and easy to implement.

• 한국측량학회지
• /
• 제35권4호
• /
• pp.241-248
• /
• 2017

GCPs (Ground Control Points) are needed to correct the DEM (Digital Elevation Model) produced from high-resolution satellite images and the RPC (Rational Polynomial Coefficient). It is difficult to acquire the GCPs through field surveys such as GPS surveys and to read the image coordinates corresponding to the GCPs. In addition, GCPs cannot cover the entire image of the test site, and the RPC correction results may be influenced by the arrangement and distribution of the GCPs in the image. Therefore, a new method for the RPC correction is needed. In this study, an LHD (Least-squares Height Difference) DEM matching method was applied using previous DEMs: SRTM DEM, digital map DEM, and corrected IKONOS DEM. This was carried out to correct the DEM produced from KOMPSAT-3 satellite images and the provided RPC without GCPs. The IKONOS DEM had the highest accuracy, and the height accuracy was about ${\pm}3m$ RMSE in a mountainous area and about ${\pm}2m$ RMSE in an area with only low heights.

• 전자공학회논문지S
• /
• 제34S권10호
• /
• pp.59-70
• /
• 1997

Until now, considerable progress has been made in the application of range finding techanique performing direct 3-D measurement from the object. However, ther are few use of the method in the area of the application of material handing. We present a range finding vision system consisting of static and dynamic range finders to automate a reclaimer used for material handling. A static range finder detects range data of the front part of the piles of material, and a height map is obtained from the proposed image processing algorithm. The height map is used to calculate the optimal job path as features for required information for material handling function. A dynamic range finder attached on the side of the arm of the reclaimer detects the change of the local properties of the material with the handling function, which is used for avoiding collision and detecting the ending point for changing direction. the developed vision systm was applied to a 1/20 simulator and the results of test show that it is appropriate to use for automating the material handling.