• 패션비즈니스
• /
• 제9권2호
• /
• pp.113-130
• /
• 2005

With a view to developing male dress forms for educational purposes, human body measurement was made for male adults in their twenties residing in Busan, Korea. Based on the results, the following conclusion was obtained: 1. Comparison d the measurement in Busan and the data of the 5th Korean physical dimensions(Size Korea) In the comparison of the Busan male adults in their 20s with national physical dimensions(Size Korea) by way of the Mollison relational deviation line, all the 28 items revealed differences less than 0.7. As the Busan sample reflects the body type d the average Korean men in their 20s, Busan's measurement results can be safely used as the data for dress form development. 2. Results of front body type classification According to the factor analysis, seven factors of the front body type were produced to explain 77.25%. The factors were shoulder angles, waist height, hip shapes, chest shapes, proportion of body(chest, waist, hip)width to shoulder width and so on. Cluster analysis brought about three somatotype groups. First, the body type with the least differences in hip-waist width, shoulder-waist with, and hip angles (24,23% in appearance) was named Type H. Second, the body type with the most chest-waist width and hip angles (38.66% in appearance) was called Type Sam X Third, the body type with the greatest shoulder-chest width, shoulder-hip width, and shoulder angles (37.11% in appearance) was termed Type Y.

• 한국콘텐츠학회논문지
• /
• 제13권7호
• /
• pp.131-140
• /
• 2013

여성복에 있어서 09/10년 시즌에 가장 주목할 만한 특징은 파워 숄더 룩이다. 파워 숄더 룩은 단순히 패션니스타들에서만이 아니라 당당히 스트리트 패션의 하나로 자리 잡았으며 파워 숄더 룩의 50%이상을 차지하는 재킷이 여성복의 핵심 아이템의 하나로 부활하면서 재킷의 어깨 각도는 0도에서 30도 이상까지 다양하게 나타난다. 다양한 어깨 각도 중 10도, 15도, 20도의 형태가 70%이상을 차지하고 있으며 패턴의 형태는 몸판의 어깨선을 자연스럽게 올리고 확장한 어깨변형 패턴, 어깨선과 함께 소매산 부분을 절개한 소매산 변형 패턴, 몸판과 소매가 연결된 패턴이 주를 이루고 있다. 파워 숄더 패턴 전개는 어깨 각도가 높아질수록 각이 시작되는 점이 목옆점에 가깝게 하고 어깨끝점이 확장되어야 소매의 외관형태가 편안하고 피트성이 좋아진다. 어깨 변형의 경우 앞뒤 진동선의 시작점인 어깨점과 소매산의 정점 부분의 선이 완만하게 이어지도록 S라인형태를 유지하는 것이 가장 중요하며 소매산의 ease분량이 일반 재킷 소매보다 많아야 파워 숄더 실루엣이 자연스럽게 연출된다. 소매변형 패턴은 중심쪽 소매의 소매산 높이는 기본소매 소매산높이의 1.5cm를 외곽 소매분량으로 처리한 것을 고려하여 소매산 높이를 설정하고 어깨 각이 커질수록 외곽소매의 소매산 폭을 크게 함으로서 소매의 어깨점이 목옆점 방향으로 휘지 않고 각이 선 파워 숄더가 완성된다. 소매변형과 소매와 몸판연결 패턴의 경우 어깨점과 상완이 연결되는 부분에 충분한 여유가 필요하며 어깨각도도 다른 형태에 비해 상대적으로 낮아 보인다. 이와 같이 파워 숄더 재킷 패턴은 패턴 제작시 디자인적인 요소를 충분히 감안한 패턴 설계와 함께 소매의 달림선 위치, 어깨너비, 어개 높이 확장량, 소매통의 여유량 등을 고려하여 제작하는 것이 바람직하다.

• 복식
• /
• 제26권
• /
• pp.279-288
• /
• 1995

The objective of the study was to provide fun-damental data on somatotype for elderly women by classifying the somatotype and analyzing the characteristics of their somatotype. The subjects were 368 women ages of 60∼84, they were measured direct anthropometry. In or-der to find out differences among the age groups, the 368 subjects were grouped into two age groups(Group 1 aged 60 to 69, Group 2 ; aged 70 to 84) Data were analyzed using Factor analysis, Cluster analysis, Duncan test and Analysis of variance. The results of this study were as follows. 1. The characteristics of Elderly women's somatotype were bending of the upper-torso, fat-ness of the waist and abdomen, drooping of the bust and shoulder and hip. In addition, height, girth, depth and width items were decreased in their sizes respectively. 2. Through the factor analysis, we extracted 5 factors from anthropometric measurements. Factor components were obesity, height, girth of the leg and arm, length of the upper-torso except the center front length, the center front length, we categorized by 4 clusters using 5 factor scores. And after the cluster analysis using 5 factor scores, 4 clusters were categorized. The characteristics of clusters were as follows. Type 1 was characterized by short, obesity type, and droopy bust. Type 2 was characterized by short and slender type, dropped bust, and bending somatotype from the lateral view. Type 3 was characterized by middle sized and straight somatotype from the lateral view. Type 4 was characterized by tall and obese type from the lateral view.

• 복식
• /
• 제35권
• /
• pp.167-180
• /
• 1997

The purpose of this study was to find out some of the problems consumers have with ready to wear garments sizing and clothing satisfaction the following women's garments; sweaters T-shirts blouses jackets pants skirts one-piece jumpers and burberry(coats). For this study questionnaires were administered to female students in community college. Employing a sample of 166 students data were analyzed by Frequencies X2-test t-test ANOVA Factor Analysis and Regression. Major results of this study were summerized as follows: 1) Purchasing clothing subjects considered mainly bust circumference for T-shirts and blouse shoulder width for jackets and jumpers hip circumference for pants and skirts and length for sweaters(knit) one-piece and burberry(coats) as a reference of fitting sites. 2) In relation with dissatisfaction with apparel fit hip circumference of pants including jeans was found as the most unsatisfactory site. Besides subjects were dissatisfied with skirts sweaters one-piece jackets blouses burberry(coats) jumpers T-shirts in order. In relateion with height and body type were most dissatisfied with pants(jeans) 3) Factors related to clothing deprivation of ready-to-wear garment were identified as aethetics elements practical elements economic elements and fittness elements. Fittness elements were most dissatisfied factors with all items of garments except for skirts.

• 한국기계가공학회지
• /
• 제21권5호
• /
• pp.91-97
• /
• 2022

The Directed Energy Deposition (DED) is a representative metal additive manufacturing method. Owing to its strong point of repairment, its application is gradually spreading in aerospace applications, power generation, military components, and mold making. 5-axis cladding is needed to repair damage, such as wear and scratches on cylindrical surfaces to circular-shaped parts, including sleeves and liners. Furthermore, the condition of cladding on inclined parts must also be considered to prevent interference between the nozzle and the part. In this study, the effects of changes in scanning speed due to the 5-axis control system and differences from the height of laser beam irradiation due to inclination are evaluated among the items that should be additionally considered in 5-axis cladding compared to 3-axis cladding. Moreover, the trends of the width and height of the clad are identified by different tilting angles via single line cladding. Lastly, cladding methods on cylindrical surfaces at various angles are proposed to enhance the clad quality and post-processing efficacy. These results can be applied with 5-axis cladding on inclined surfaces, including cylindrical surfaces.

• 복식문화연구
• /
• 제12권6호
• /
• pp.1021-1030
• /
• 2004

The purpose of this study was to develop and make the head form by setting the region of the head for detailed measurement of the head to make the type of closely fit hat and typifying the head form of Korean women's with each region of the head based on the measurements of each region of the head according characteristics. A total of 285 Korean women's in the age group of 18 to 35 years old. It were measured through the direct measurement method by selecting 67 measurement items. As a result of the findings obtained from cluster analysis could be classified into 3 type. Type 1($46\%$) is U-shaped form, that is high in head height on sides and circumference is smallest, whose facial region and occiput is flattest of three types. Type 2($22.4\%$) is inverted triangle form, that is flat in head ridge, low in head height on sides and wide in the frontal width. Type 3($31.6\%$) is oval form, that is largest in size, has the projected occiput and is of three-dimensional form.

• 대한치과교정학회지
• /
• 제18권1호
• /
• pp.79-88
• /
• 1988

The purpose of this study was to investigate the factors which might be related to mandibular third molar eruption and to predict the possibility of whether or not it will be erupted. The material of this study was lateral cephalometric radiograms, pantomograms and dental casts obtained from 70 patients (19 males, 51 females) ranging in age from 18.0 to 32.1 years. They were devided into erupted group and impacted group of mandibular third molars. For the comparison of each group, a total of 20 measurement items were employed and the data were analyzed by means of computer statistical method. As a result of this study, the following conclusion can be made; 1. The longer mandibular body length and narrower mandibular ramus width, the higher eruption tendency of the lower third molar, but the degree of genial angle was not related to mandibular third molar eruption. 2. The lower percentage of posterior mandibular body height to anterior mandibular body height, the higher eruption tendency of the lower third molar. 3. The total tooth size, including the lower second molar, appeared to be larger in the impacted group than in the erupted group of the lower third molar. 4. The arch length discrepancy of the impacted group was more severe in contrast with the erupted group of the lower third molar.

• 한국의상디자인학회지
• /
• 제18권2호
• /
• pp.15-33
• /
• 2016

Women in their 30s and 40s, who are at the center of "ageless" and "down-aging" consumer trends, are likely to encounter problems with fitting and size conformity when they wear casual clothes targeting women in their 20s. Hence, differences in upper body sizes and body types between women in their 20s and women in their 30s and 40s were analyzed. The data for this study was from the 6th Size Korea survey of body measurements of 1,675 female adults in their 20s-40s. SPSS 21.0 for Windows was used for analysis of the collected data. To examine differences in average upper body size between women in their 20s and women in their 30s and 40s, descriptive statistics and independent sample t-tests were conducted. Factor and cluster analyses were used to classify body types by age groups. Comparing direct measurement items showed that women in their 20s tend to have higher average values for most height-related items-including body height-and lower average values for circumference, thickness, and width than women in their 30s and 40s. Factors in determining the upper body shapes of women in their 20s to 40s were narrowed to five; through a cluster analysis, upper body shapes of women were classified into three body types as follows. Type 1 women are shorter and thinner with small frames; Type 2 women have the highest vertical values for their upper bodies and average values for obesity-related categories of circumference, thickness, and width. Type 3 women are the shortest and has the highest body mass index (BMI), verifiable as obese. By analyzing differences in body type distribution according to age groups, it was found that more than 90% of women in their 20s belong to Types 1 and 2. On the other hand, most women in their 30s and 40s are identified as Type 3.

• 한국의류학회지
• /
• 제15권3호
• /
• pp.297-307
• /
• 1991

The purpose of this study was to investigate the effect of physical type and age on preference for color and fabric motifs in women's clothing design. Color preference measures consisted of fabric samples in solid colors and drawings of clothing styles painted in colors. Preference for fabric motifs was assessed by printed fabrics in various patterns and sizes. All of the preference measures were devised specifically for this study. Furthermore, items on height and weight for physical type as well as age of the subjects were included in the questionnaire. Data were obtained by means of structured interviews and self-administered questionnaires from 588 women ($20\~60$ years of age) in seoul. Analysis was by chi-square ($X^{2}$), frequency, percentage, and mean. On color preference, a small but significant body type, height, and age effect was found on some types of clothing. Preference for fabric motifs was affected by body type; height of subjects was related to preference for size of motifs, and age was related to choice, size, and width of striped motifs. It was concluded that body type, height, and age are 1e3st effective in predicting color preference. Fabric motif preference was influenced more by age than by body type or height. Generally, there was some similarities in preference for lines and fabric patterns among slim body types, tall figures, and younger age groups as well as heavy body types, short figures, and older age groups.

• 복식
• /
• 제53권5호
• /
• pp.1-12
• /
• 2003

This paper proposes a system for measuring the 3D human bodies using the multiple 2D images. The system establishes the multiple image input circumstance from the digital camera for image measurement. The algorithm considering perspective projection leads us to estimate the 3D human bodies from the multiple 2D images such as frontal. side and rear views. The results of the image measurement is compared those of the direct measurement and the 3D scanner for the total 40 items (12 heights, 15 widths and 13 depths). Three persons measure the 40 items using the three measurement methods. In comparison of the results obtained among the measurement methods and the persons, the results between the image measurement and the 3D scanner are very similar. However, the errors for the direct measurement are relatively larger than those between the image measurement and the 3D scanner. For example, the maximum errors between the image measurement and the 3D scanner are 0.41cm in height, 0.39cm in width and 0.95cm in depth. The errors are acceptable in body measurement. Performance of the image measurement is superior to the direct. because the algorithm estimates the 3D positions using the perspective projection. In above comparison, the image measurement is expected as a new method for measuring the 3D body, since it has the various advantages of the direct measurement and 3D scanner in performance for measurement as well as in the devices, cost, Portability and man power.