• Korean Journal of Human Ecology
• /
• v.12 no.5
• /
• pp.767-776
• /
• 2003

The purpose of this study was to classify side somatotypes of the trunk by analysing photographic data. Then their distribution according to the age groups was studied. The subjects were 315 females of 18 to 49 year-old. Thirty one photographic measurements were taken to each subject. The factors affecting the side somatotype of the trunk were obtained by principal component analysis, vertical size, posterior/anterior depth and neck posture. The side somatotypes of the trunk were classified into 4 types and their differences were shown by analysing photographic data. The side silhouettes of 4 types were compared with balanced type. By suggesting the canonical discriminant function with the unstandardized canonical coefficient, individual somatotype of the trunk could be discriminated from the photographic data of anterior neck height, anterior waist height, posterior waist depth, buttock height, and anterior depth at the level of back protrusion. The frequency distribution of the side somatotypes of the trunk according to the age groups could be applied for clothing construction and the rate of clothing production.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2003.06a
• /
• pp.192-195
• /
• 2003

To identify the difference between Korean-Chinese and Korean children's variation of pulmonary function with personal factors (suck as age, height, and weight), we performed pulmonary function test (PFT) and measured personal factors of 200 Korean-Chinese children participants from two elementary schools of Beijing and Melons city in China. Regression analysis was utilized to determine which personal factors were significantly correlated with PFT measure (FVC and FEV$_1$). We compared the regression model from this study with those of other studies of Korean children. Similar to other studies, we found that the most important variable, influencing PFT measure, was height, whereas addition of either age or weight in the regression virtually did not increase the accuracy. As the result of comparison of the regression model from this study with those of other studies of Korean children, variation in FVC or FEV$_1$ with height were similar.

• Journal of the Korean Society of Safety
• /
• v.24 no.1
• /
• pp.37-42
• /
• 2009

The present study is to estimate the effect of wave height affecting at the front face of breakwater systems, when a submarine trench is dredged in the distant offshore from outer breakwater. The wave diffraction field, which is important hydraulic factor in the ocean, is considered to be two dimensional(2D) plane and the configuration of the submarine trench on the sea bed designated by single horizontal long-rectangular system. The numerical simulation is performed by using Green function based on the boundary integral equation and meshed at moving boundary conditions. The results of present numerical simulations are illustrated by applying the normal incidence. It is shown that the ratios of wave height reduction at the front face of breakwater systems are approximately 20% by the effect of placing long trench on the sea bed. This study can effectively be utilized for safety assessment to various breakwater systems in the ocean field.

• Journal of applied mathematics & informatics
• /
• v.37 no.5_6
• /
• pp.469-480
• /
• 2019

A generalized tiling is defined as a generalization of the properties of tiling a region of ${\mathbb{Z}}^2$ with dominoes, and comprises tiling with rhombus and any other tilings that admits height functions which can be ordered into a distributive lattice. By using properties of the distributive lattice, we prove that the Markov chain consisting of moving from one height function to the next by a flip is fast mixing and the mixing time ${\tau}({\epsilon})$ is given by ${\tau}({\epsilon}){\leq}(kmn)^3(mn\;{\ln}\;k+{\ln}\;{\epsilon}^{-1})$, where mn is the area of the grid ${\Gamma}$ that is a k-regular polycell. This result generalizes the result of the authors (T-tetromino tiling Markov chain is fast mixing, Theor. Comp. Sci. (2018)) and improves on the mixing time obtained by using coupling arguments by N. Destainville and by M. Luby, D. Randall, A. Sinclair.

• Korean Journal of Clinical Laboratory Science
• /
• v.37 no.3
• /
• pp.207-211
• /
• 2005

Body index is known as it affects pulmonary function tests (PFT), so it has been used with predictive formula and nomogram in terms of sex, age, height, etc. Body indices as body weight, body mass index (BMI), and body surface area (BSA) might also affect PFT, so that we have analyzed the correlations between body indices and forced expiratory volume in one second ($FEV_1$), and have done multiple regression analysis to see how body indices affect $FEV_1$. We confirmed that $FEV_1$ had positive correlations with height (r=0.49, p<0.01), body weight (r=0.37, p<0.01), and BSA (r=0.47, p<0.01), inverse correlation with age (r=-0.45, p<0.01), but no correlation with BMI. We found that the 41.9% of $FEV_1$ was diverged from height, age and BSA. Therefore, BSA definitely needs to be considered with predictive formula and nomogram in PFT.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.6
• /
• pp.81-87
• /
• 2008

A geometrically asymmetric trapezoidal fin with variable fin base thickness and height is optimized based on the fixed fin base height using a one-dimensional analytic method. The temperature profile along the normalized X position in the fin is presented. For the fixed fin base height, the optimum heat loss, fin length and efficiency as a function of inside fluid convection characteristic number, fin base thickness and height, fin shape factor, convection characteristic numbers ratio and ambient convection characteristic number are represented. One of the results shows that the effect of fin base height and ambient convection characteristic number on the optimum values is remarkable.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.295-295
• /
• 2016

Recently, TCO films with low carrier concentration, high mobility and high work function are proposed beneficial as front electrode in HIT solar cell due to free-carrier absorption in NIR wavelength region and low Schottky barrier height in the front TCO/a-Si:H(p) interface. We report high transmittance and work function zirconium-doped indium tin oxide (ITO:Zr) films with various plasma (Ar/O2 and Ar) conditions. The role of (Ar/O2) plasma was to enhance the work function of the ITO:Zr films whereas the pure Ar plasma based ITO:Zr showed good electrical properties. The RF magnetron sputtered ITO:Zr films with low resistivity and high transmittance were employed as front electrode in HIT solar cells, yield the best performance of 18.15% with an open-circuit voltage of 710 eV and current density of 34.63 mA/cm2. The high work function ITO:Zr films can be used to modify the front barrier height of HIT solar cell.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.641-642
• /
• 2010

Trigonometric functions is the study based on the most simple and unique properties of right triangle that if an angular size was settled, the value of the ratio of these sides is constant regardless of the size of the triangle. If it is the angle of right triangle with the length of the lower base and the measured angle of building, the height of the building can be obtained by using trigonometry. it is considered as a good way to gauge the height of the building as the car moves.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.4
• /
• pp.87-92
• /
• 2007

The full automation welding has not yet been achieved partly because the mathematical model for the process parameters of a given welding task is not fully understood and quantified. Several mathematical models to control welding quality, productivity, microstructure and weld properties in arc welding processes have been studied. However, it is not an easy task to apply them to the various practical situations because the relationship between the process parameters and the bead geometry is non-linear and also they are usually dependent on the specific experimental results. Practically, it is difficult, but important to know how to establish a mathematical model that can predict the result of the actual welding process and how to select the optimum welding condition under a certain constraint. In this paper, an attempt has been made to develop an neural network model to predict the weld top-bead height as a function of key process parameters in the welding. and to compare the developed models using three different training algorithms in order to select an adequate neural network model for prediction of top-bead height.

• Tribology and Lubricants
• /
• v.35 no.1
• /
• pp.37-43
• /
• 2019

This paper presents an optimization method to determine the shoulder height of an angular contact ball bearing by 3D contact analysis using nondimensional-shaped variables. The load analysis of the ball bearing is performed to calculate the internal load distributions and contact angles of each rolling element. From the results of bearing load analysis and the contact geometry between the ball and inner/outer raceway, 3D contact analyses using influence function are conducted. The nondimensional shoulder height and nondimensional load are defined to give the generalized results. The relationship between the shoulder height and radius of curvature of the shoulder under various loading conditions is investigated in order to propose a design method for the two design parameters. Using nondimensional parameters, the critical shoulder heights are optimized with loads, contact angles, and conformity ratios. We also develop contour maps of the critical shoulder height as functions of internal loads and contact angles for the different contact angles using nondimensional parameters. The results show that the dimensionless shoulder height increased as the contact angle and dimensionless load increased. Conversely, when the conformity ratio increased, the critical shoulder height decreased. Therefore, if the contact angle is reduced and the conformity ratio is increased within the allowable range, it will be an efficient design to reduce the shoulder height of ball bearings.