• Journal of the Korean Geotechnical Society
• /
• v.23 no.6
• /
• pp.67-76
• /
• 2007

Raining method has been widely used for preparing sand specimen because of its ability to reconstitute the homogeneous specimen with desired relative density and its reliability established by the numerous experiments on diverse influential factors. In conventional raining methods, adjustment of relative density is achieved by controlling the shutter porosity and the whole system is required to be re-adjusted to achieve the target relative density when the granular characteristics are changed. It is also observed from conventional methods that certain degrees of spatial variation in density exist and the limited range of relative density is reproduced. In this paper, raining system with porous plate is proposed. It is shown that the wide range of relative density can be achieved by controlling failing height only. This enhanced system is able to obviate the subtle control of shutter porosity and minimize the effect of falling distance, which in turn ensures the homogeneity of the specimen, especially for low relative density.

• Journal of Korean Society of Transportation
• /
• v.23 no.5 s.83
• /
• pp.123-134
• /
• 2005

This research aims at developing a new method which can replace the existing method. known as the quality factor(Q factor) method by an L-R-C test for use in the performance test of inductive loop detectors(ILD) being installed and maintained. In this study, a sensor to detect a magnetic field in terms of frequency and intensity, a method to collect field data, the method of analysis, and the method of diagnosis were developed. An automatic diagnosis system which was developed to overcome those drawbacks has the following features : First, field data is collected automatically by a test vehicle equipped with magnetic field sensors that is running can be said to along the roadway and. thus, the new system completely overcome the roadway and, thus, the new system can be said to completely overcome the inefficiency of the existing method second, since the magnetic fold generated from the ILD is the final output of the whole system of ILD, the existing problem has been solved. third. since each of the detection area by height is collected by the magnetic sensors installed by height. a basic for the identification of the vehicle types to be detectable and the setting of adjustment factors has been made. For the automatic diagnosis system developed during in this study, a reliability test was carried out by comparing vehicle times of ILD installed ideally.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.23 no.4
• /
• pp.153-178
• /
• 2018

Most operational uses of wind speed data require measurements at, or estimates generated for, the reference height of 10 m above mean sea level (AMSL). On the Ieodo Ocean Research Station (IORS), wind speed is measured by instruments installed on the lighthouse tower of the roof deck at 42.3 m AMSL. This preliminary study indicates how these data can best be converted into synthetic 10 m wind speed data for operational uses via the Korea Hydrographic and Oceanographic Agency (KHOA) website. We tested three well-known conventional empirical neutral wind profile formulas (a power law (PL); a drag coefficient based logarithmic law (DCLL); and a roughness height based logarithmic law (RHLL)), and compared their results to those generated using a well-known, highly tested and validated logarithmic model (LMS) with a stability function (${\psi}_{\nu}$), to assess the potential use of each method for accurately synthesizing reference level wind speeds. From these experiments, we conclude that the reliable LMS technique and the RHLL technique are both useful for generating reference wind speed data from IORS observations, since these methods produced very similar results: comparisons between the RHLL and the LMS results showed relatively small bias values ($-0.001m\;s^{-1}$) and Root Mean Square Deviations (RMSD, $0.122m\;s^{-1}$). We also compared the synthetic wind speed data generated using each of the four neutral wind profile formulas under examination with Advanced SCATterometer (ASCAT) data. Comparisons revealed that the 'LMS without ${\psi}_{\nu}^{\prime}$ produced the best results, with only $0.191m\;s^{-1}$ of bias and $1.111m\;s^{-1}$ of RMSD. As well as comparing these four different approaches, we also explored potential refinements that could be applied within or through each approach. Firstly, we tested the effect of tidal variations in sea level height on wind speed calculations, through comparison of results generated with and without the adjustment of sea level heights for tidal effects. Tidal adjustment of the sea levels used in reference wind speed calculations resulted in remarkably small bias (<$0.0001m\;s^{-1}$) and RMSD (<$0.012m\;s^{-1}$) values when compared to calculations performed without adjustment, indicating that this tidal effect can be ignored for the purposes of IORS reference wind speed estimates. We also estimated surface roughness heights ($z_0$) based on RHLL and LMS calculations in order to explore the best parameterization of this factor, with results leading to our recommendation of a new $z_0$ parameterization derived from observed wind speed data. Lastly, we suggest the necessity of including a suitable, experimentally derived, surface drag coefficient and $z_0$ formulas within conventional wind profile formulas for situations characterized by strong wind (${\geq}33m\;s^{-1}$) conditions, since without this inclusion the wind adjustment approaches used in this study are only optimal for wind speeds ${\leq}25m\;s^{-1}$.

• Biomedical Science Letters
• /
• v.16 no.3
• /
• pp.169-177
• /
• 2010

Osteoporosis is a disease that increases the fracture rates and a major cause of increased mortality and morbidity in the elderly people. This study is to determine which components of body composition and metabolic syndrome risk factors are important to bone health, we analysed the relationship among bone mineral density (BMD), body composition and metabolic syndrome risk factors in females. Totally 630 females participated in a medical check-up program (mean age 47 years) were selected for this study. Body composition analysis was performed by segmental bioelectrical impedance method, muscle mass, and percent body fat were measured. We also measured metabolic syndrome risk factors including abdominal obesity, HDL-cholesterol, triglyceride, blood pressure and fasting glucose level. Metabolic syndrome was defined by NCEP-ATP III criteria. The lumbar spine and femoral neck BMD were measured using the dual energy X-ray absorptiometry. Osteopenia and osteoporosis were observed in 180 and 51 persons, respectively. Muscle mass and HDL-cholesterol decreased in osteopenia and osteoporosis groups compared to the control group, and the grade was shown progressively by the symptoms. Significant positive correlation between BMD and muscle mass was observed. Multi variable regression analyses showed that % body fat and muscle mass were independent predictors of BMD after adjustment of age, height and weight. In conclusion, the BMD showed negative correlation with the metabolic and body composition was associated with BMD.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.1013-1014
• /
• 2006

Mobilecomputer offers more fundamental role than role assistance enemy of modern technology equipment and new Information Technology can reconsider, and reconstruct creatively accuracy of physiological concept. That military register symptoms are developed of disease, before far before rehalibitation, offer possibility that can intervene in process that motive change of military register symptoms after rehalibitation. But, that many parameters become analysis target and mathematical settlement and equalization system of neted data of that is huge, same time collection of all datas can lift difficulty etc.. These main weakness puts in structural relation between elements that compose system. Therefore, dynamics research that time urea of systematic adjustment has selected method code Tuesday nerve dynamics enemy who groping of approach that become analysis point is proper and do with recycling bioelectricity signal. Nature model of do living body signal digital analysis chapter as research result could be developed and scientific foundation groping could apply HSS (Hardware-software system) by rehalibitation purpose. Special quality that is done radish form Tuesday of bioelectricity signal formation furthermore studied, and by the result, fundamental process of bodysignal in do structure circuit form of analog - digital water supply height modelling do can

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.2
• /
• pp.89-95
• /
• 2021

Pressure sores are an unresolved human challenge. In this study, a keyboard-type medical bed was developed and a body pressure sensor was installed to provide a method to control the keyboard so that the pressure sores do not reach the critical pressure. For this, a keyboard-type mattress using a 4bar link is developed, and a method of controlling the height adjustment of the keyboard within the critical pressure through a body pressure sensor is used. There is a feeling of discomfort in the body when the keyboard is raised and lowered from pressure sores, which is an important factor: pressure x time, and only time control is performed, but if the proposed method is used, pressure is controlled within the critical pressure, thereby preventing bedsores in a comfortable state. The effectiveness and validity of the developed medical bed system were verified through theories and experiments.

• Journal of Forest and Environmental Science
• /
• v.38 no.3
• /
• pp.184-194
• /
• 2022

Triplochiton scleroxylon K. Schum is the plant species most affected by logging activities in the East Region of Cameroon due to its market value. This logging has impacted the ecological niche of the fern plant for which limited research has been done. The aim of this study is to contribute towards improving knowledge of fern richness and biomass on T. scleroxylon within the Central African sub-region. Fern data collection was done on 20 felled/harvested T. scleroxylon where, in addition to fern inventory, fern biomass was collected by the destructive method. The diameter and height of T. scleroxylon measured were used as explanatory variables in allometric equations for fern biomass estimation. Fern inventory was characterized using diversity index. Eight fern species were recorded on T. scleroxylon (≈5 species/T. scleroxylon). The minimum diameter where fern could be found is 59.4 cm. The average fern biomass found was 23.62 kg/T. scleroxylon. Pearson correlation coefficient showed a positive correlation (r>0.55) between fern biomass and T. scleroxylon diameter. For allometric equation, the logarithmic model improved better the adjustment than the non-logarithmic model. However, the quality of the adjustment is improved more when only the diameter is considered as an explanatory variable. Fern biomass is estimated to 90.08 kg/ha^-1 with 76.02 kg/ha^-1 being lost due to T. scleroxylon exploitation in the study area. This study is a contribution towards increasing knowledge of fern diversity specific to T. scleroxylon, and also fern biomass contribution to climate change mitigation and the potential carbon loss due to T. scleroxylon exploitation.

• Journal of the Korea Computer Industry Society
• /
• v.7 no.4
• /
• pp.437-446
• /
• 2006

Mobilecomputer offers more fundamental role than role assistance enemy of modern technology equipment and new Information <중략> These main weakness puts in structural relation between elements that compose system. Therefore, dynamics research that time urea of systematic adjustment has selected method code Tuesday nerve dynamics enemy who groping of approach that become analysis point is proper and do with recycling bioelectricity signal. Nature model of do living body signal digital analysis chapter as research result could be developed and scientific foundation groping could apply HSS (Hardware-software system) by rehalibitation purpose. Special quality that is done radish form Tuesday of bioelectricity signal formation furthermore studied, and by the result, fundamental process of bodysignal in do structure circuit form of analog - digital water supply height modelling do can.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.2167-2168
• /
• 2006

Mobilecomputer of offers more fundamental role than role assistance enemy of modem technology equipment and new Information Technology can reconsider, and reconstruct creatively accuracy of physiological concept. That military register symptoms are developed of disease, before far before rehalibitation, of for possibility that can intervene in process that motive change of military register symptoms after rehalibitation. But, that many parameters become analysis target and mathematical settlement and equalization system of noted data of that is huge, same time collection of all datas can lift difficulty etc.. These main weakness puts in structural relation between elements that compose system. Therefore, dynamics research that time urea of systematic adjustment has selected method code Tuesday nerve dynamics enemy who groping of approach that become analysis point is proper and do with recycling bioelectricity signal. Nature model of do living body signal digital analysis chapter as research result could be developed and scientific foundation groping could apply HSS (Hardware-software system) by rehalibitation purpose. Special quality that isdone radish form Tuesday of bioelectricity signal formation furthermore studied, and by the result, fundamental process of bodysignal in do structure circuit form of analog - digital water supply height modelling do can.

• Korean Journal of Applied Biomechanics
• /
• v.30 no.1
• /
• pp.121-129
• /
• 2020

Objective: This study was conducted with the aim of verifying the effectiveness of the duocock exercise, which is being utilized at the newly developed site to promote balance maintenance, basic physical strength and muscle strength among various age groups, in order to prevent fall and successfully age. Method: In this study, we conducted the duocock Exercise Program for 12 weeks (twice a week for an hour) for 10 senior citizens aged 65 or older (68.8±4.76 yrs, height: 15±6.00 cm) using Western-based health institutions in Daejeon, and compared the pre- and post- effects on basic physical strength and posture balance. All the data obtained from this study were used in statistical program SPSS 24 to perform paired t-test. The significance level for all statistical analyses was set at the level of p<0.05. Results: The 12 week duocock program showed statistically significant improvements in lower extremity muscle strength, equilibrium, agility, balance, and coordination in the basic fitness factors underlying successful aging (p<0.05). In addition, the trunk imbalance, which acts as a factor of falls and body balance, was statistically significant (p<0.05) and the posture balance of the sagittal plane also showed the effect of proper body adjustment. Conclusion: Based on the results of this study, duocock provides a new exercise program in the form of a sustainable sport as a two-handed exercise, and is very effective for the elderly to improve their basic physical strength as well as to control postural imbalances, strengthen and increase muscle strength.