• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.610-615
• /
• 2003

Electric rolling stock is one of major public transportation because of an increase in population and heavy traffic problems. The passengers under the influenced of indoor air quality such as air temperature, relative humidity and air velocity. Ventilation system on passenger cars should be designed for the health and comfort of the passengers. One of the main aim is to create an acceptable thermal environment without draught problems. The draught sensation increases when the air temperature decreases and the air velocity increases. Airflow in passenger cars is turbulent. Lateral temperature and humidity gradients in the electric rolling stock have been studied. And, the difference in the mean temperature and relative humidity measured at 0.7, 0.9, 1.2, 1.7 m above from the floor.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2003.09a
• /
• pp.288-294
• /
• 2003

Increasing the volume of traffic on the roads causes social and economical problems such as increasing air-pollution and distribution cost. Prefabricated light weight bridge becomes a possible solution for these problems in the urban area where it is difficult to construct new one or expend the existing road. There are some merits in this kind of bridge. First, the design live and dead loads are minimized by allowing only passenger cars. Second employing prefabrication construction scheme reduces the construction time. Third, there is no need to buy land if the elevation road is placed on the top of existing one. In seismic design of bridges, base isolation has been an effective solution when the bridge has stiff piers and a heavy superstructure. The prefabricated light weight bridge has different dynamic characteristics from the ordinary bridges. In this paper, the applicability of base isolators such as lead rubber bearing and elastomeric bearing, to prefabricated light weight bridge is examined.

• Structural Engineering and Mechanics
• /
• v.59 no.1
• /
• pp.187-207
• /
• 2016

Practical ambient excitations of engineering structures usually do not comply with the stationary-white-noise assumption in traditional operational modal analysis methods due to heavy traffic, wind guests, and other disturbances. In order to eliminate spurious modes induced by non-white noise inputs, the improved stochastic subspace identification based on a delay index is proposed in this paper for a representative kind of stationary non-white noise ambient excitations, which have nonzero autocorrelation values near the vertical axis. It relaxes the stationary-white-noise assumption of inputs by avoiding corresponding unqualified elements in the Hankel matrix. Details of the improved stochastic subspace identification algorithms and determination of the delay index are discussed. Numerical simulations on a four-story frame and laboratory vibration experiments on a simply supported beam have demonstrated the accuracy and reliability of the proposed method in eliminating spurious modes under non-white noise ambient excitations.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.6
• /
• pp.859-867
• /
• 2019

Severe weather conditions, such as heavy snowfall, rain, heatwave, etc., may affect travel behaviors of people and finally change traffic patterns in transportation networks. To deal with those changes and prevent any negative impacts on the transportation system, understanding those impacts of severe weather conditions on the travel patterns is one of the critical issues in the transportation fields. Hence, this study has focused on the impacts of a weather condition on travel patterns of public transportations, especially when a heavy snowfall which is one of the most critical weather conditions. First, this study has figured out the most significant weather condition affecting changes of public transport ridership using weather information, card data for public transportation, mobile phone data; and then, developed a decision-tree model to determine complex inter-relations between various factors such as socio-economic indicators, transportation-related information, etc. As a result, the trip generation of public transportations in Seoul during a heavy snowfall is mostly related to average access times to subway stations by walk and the number of available parking lots and spaces. Meanwhile, the trip attraction is more related to business and employment densities in that destination.

• Smart Structures and Systems
• /
• v.3 no.3
• /
• pp.281-298
• /
• 2007

The load carrying capacity of a bridge needs to be properly assessed to operate the bridge safely and maintain it efficiently. For the evaluation of load carrying capacity considering the current state of a bridge, static and quasi-static loading tests with weight-controlled heavy trucks have been conventionally utilized. In these tests, the deflection (or strain) of the structural members loaded by the controlled vehicles are measured and analyzed. Using the measured data, deflection (or strain) correction factor and impact correction factor are calculated. These correction factors are used in the enhancement of the load carrying capacity of a bridge, reflecting the real state of a bridge. However, full or partial control of the traffic during the tests and difficulties during the installment of displacement transducers or strain gauges may cause not only inconvenience to the traffic but also the increase of the logistics cost and time. To overcome these difficulties, an alternative method is proposed using an excited response part of full measured ambient acceleration data by ordinary traffic on a bridge without traffic control. Based on the modal properties extracted from the ambient vibration data, the initial finite element (FE) model of a bridge can be updated to represent the current real state of a bridge. Using the updated FE model, the deflection of a bridge akin to the real value can be easily obtained without measuring the real deflection. Impact factors are obtained from pseudo-deflection, which is obtained by double-integration of the acceleration data with removal of the linear components on the acceleration data. For validation, a series of tests were carried out on a steel plategirder bridge of an expressway in Korea in four different seasons, and the evaluated load carrying capacities of the bridge by the proposed method are compared with the result obtained by the conventional load test method.

• Journal of Navigation and Port Research
• /
• v.34 no.6
• /
• pp.487-492
• /
• 2010

Ulsan Port is the biggest base port for liquid cargoes in Korea and is pushing in earnest for the development of the 'Ulsan New Port' and 'Northeast Asia Oil-Hub' to prepare for continuous shipment growth. However, Ulsan is in the situation which the harbour limit and anchorages are narrower than other trading ports and the occurrence probability of marine accidents is very high due to heavy marine traffic. We will find and suggest the plan to enlarge the harbour limit essentially needed to expand anchorages considering the geomorphological features of Ulsan and the volume of marine traffic in this research. For the enlargement of harbour limit needed to expand anchorages, the anchorage area needed for Ulsan New Port was calculated after the quantitative analysis of enlargement range through the mutual comparison of the area of harbour limit and anchorages with berths and the volume of marine traffic. The reasonable type of harbour limit, which is based on the survey by a group of experts, was also determined after the decision of the range of harbour limit to accommodate the relevant anchorages.

• The KIPS Transactions:PartC
• /
• v.9C no.1
• /
• pp.115-122
• /
• 2002

This paper presents a new web cluster scheme based on dispatcher which does not depend on operating system for server and can examine server's status interactively. Two principal functions are proposed for new web cluster technique. The one is self-controlled load distribution and the other is transaction fail-safe. Self-controlled load distribution function checks response time and status of servers periodically, then it decides where the traffic goes to guarantee rapid response for every query. Transaction fail-safe function can recover lost queries including broken transaction immediately from server errors. Proposed new web cluster scheme is implemented by C language on Unix operating system and compared with legacy web cluster products. On the comparison with broadcast based web cluster, proposed new web cluster results higher performance as more traffic comes. And on the comparison with a round-robin DNS based web cluster, it results similar performance at the case of traffic processing. But when the situation of one server crashed, proposed web cluster processed traffics more reliably without lost queries. So, new web cluster scheme Proposed on this dissertation can give alternative plan about highly increasing traffics and server load due to heavy traffics to build more reliable and utilized services.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.31 no.1
• /
• pp.98-107
• /
• 2013

Big and old trees in the scenic spots with the attributes of remote villas are vulnerable to man-made damages and very sensitive to the external environment such as soil conditions, so the corresponding management plans are required. Thus this study has been conducted to survey the big and old trees in the scenic remote villas and suggest the ideal management plans. The results can be summarized as follows. First, regarding the tree heath above the ground, transformation of tree, death of branches, and death of barks are closely related to tree vigor. Particularly, the areas receiving many visitors require prompt countermeasures against the dried and dead tress above the ground and the areas in which dried and dead tress occurred and also the safety measures for the visitors and facilities. Second, regarding the soil environment, visitor traffic is closely related to the tree vigor. In 15 remote villa gardens, 64% of trees are exposed to heavy traffic and the tree vigor has declined due to an increase of visitor. Thus, there is a need to give positive consideration the installation of the complementary facilities and the plantation of herbal plants in the congested areas to form the ground surface that can tolerate the heavy visitor traffic. Third, remote gardens are in general located adjacent to ponds and mountain streams and thus the trees in the waterfront areas require the prompt countermeasures against the decline of growth due to the excess-moisture in the soil. Further the blockage of the sewage system due to the heavy rains dampens the surrounding soil, which results in lethal damages to the trees. Thus, there is a need of the maintenance of the waterfront areas and sewage system before and after the rainy season. In addition, there is a need to establish medium-long term management polices through the recognition of the importance of the main trees of remote villa gardens in scenic spots and prepare the tree management manual depending on the attributes of the corresponding areas. I strongly suggest making manuals for the systematic management as well as the extensive PR activities and education for the preservation of tress on a long-term basis; and furthermore securing the budget and manpower for the research and development of a systematic management system.

• Asian Journal of Atmospheric Environment
• /
• v.8 no.3
• /
• pp.126-139
• /
• 2014

In order to estimate the influence of sources on $PM_{2.5}$ in the industrial area of Japan, we carried out a source analysis using chemical component data of $PM_{2.5}$. $PM_{2.5}$ samples were collected intermittently at an industrial area in Japan from July 2010 to November 2012. Water soluble ions ($Cl^-$, $NO_3{^-}$, $SO{_4}^{2-}$, $Na^+$,$NH_4{^+}$, $K^+$, $Mg^{2+}$, $Ca^{2+}$), elements (Al, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, As, Cd, Sb, Pb), and carbonaceous species (OC, EC) of the $PM_{2.5}$ (a total of 198 samples) were analyzed. Positive Matrix Factorization (PMF) model was applied to the data of those chemical components to identify the source of $PM_{2.5}$. At this observation site, nine factors were extracted. The major contributors of $PM_{2.5}$ were secondary sulfate 1, in which loading factors of $SO{_4}^{2-}$ and $NH_4{^+}$ were large (percentage source contribution: 20.9%), traffic, in which loading factors of OC (organic carbon) and EC (elemental carbon) were large (20.8%), secondary sulfate 2, in which loading factors of K and $SO{_4}^{2-}$ were large (8.0%), steel mills (7.8%), secondary chloride and nitrate (7.0%), soil (5.0%), heavy oil combustion (3.8%), sea salt (3.8%), and coal combustion (2.3%). The conditional probability function (CPF) and the potential source contribution function (PSCF) were carried out to examine the influence of a regional source and a broad-based source, respectively. CPF results supported local source influences such as steel mills, sea salt, traffic, coal combustion, and heavy oil combustion. PSCF results suggested that ships in the East China Sea, an industrial area of the east coastal region of China, and an active volcano in the Kyushu region of Japan were potential regional sources of secondary sulfate 1. Secondary sulfate 2 was affected by the burning of biomass fields and by coal combustion in Chinese urban areas such as Beijing, Hebei, and western Inner Mongolia. Source characterization using continuous data from one site showed a potential source representing fossil fuel combustion is affected both by regional and broad-based sources.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.3
• /
• pp.94-104
• /
• 2016

In this study, factor and cluster analysis are used to classify characteristics of the administrative basic unit, "Dong", of the Incheon Metropolitan City. Travel characteristics of the classified groups are then analyzed through databases to provide directions of urban transportation planning. First, industrially developed administrative-dong show a high commuting volume by using cars. Thus the analysis indicated the need to staggering work-hour system and signal operating system policy. Second, commercially developed administrative-dong show heavy use of public transportation and long distance commute as well as high volume of shoppers. The analysis indicated the need to improve road infrastructure. Third, densely populated administrative-dong show a high rate of commute to work and school as well as long hours of commuting. Thus the analysis indicated the need to improve road transportation policies during rush hours. Fourth, administrative-dong with multiple characteristics feature heavy pedestrian traffic thus the study analyzed the need to improve pedestrian environment policies. Lastly, administrative-dong in close proximity to train stations feature extensive use of biking as well as high volume of shoppers and students commuting. Thus the study analyzed the necessity to have plans to enhance accessibility.