• Journal of the Korean Wood Science and Technology
• /
• v.12 no.3
• /
• pp.9-14
• /
• 1984

The removal and readsorption effects of pine and oak bark grown in Korea on water pollution caused by heavy metal ions have been investigated. Bark saturated with heavy metal ions is refleshed with 0.1 N ammonium acetate and then its readsorption has been done. The results obtained are as follows: 1. Adsorption effect of pine bark is similiar to that of oak bark, and 20-40 meshed bark gives the best results. 2. 0.1 N amonium acetate of pH 7 shows more elutriative than the others such as pH 3 hydrochloric acid, pH 10 ammonium hydroxide and pH 7 water. 3 Pine bark refleshed with 0.1 N ammonium acetate gets two times as effective in adsorption as raw bark, and shows more effective than oak bark.

• Journal of Environmental Science International
• /
• v.29 no.7
• /
• pp.739-748
• /
• 2020

The characteristics of heavy metal ion (Ni²⁺, Zn²⁺, and Cr³⁺) adsorption by zeolite synthesized from Jeju scoria using the fusion and hydrothermal method, were studied. The synthetic zeolite was identified as a Na-A zeolite by X-ray diffraction analysis and scanning electron microscopy images. The equilibrium of heavy metal ion adsorption by synthetic zeolite was reached within 60 min for Ni²⁺ and Zn²⁺, and 90 min for Cr³⁺. The uptake of heavy metal ions increased with increasing pH in the range of pH 3-6 and the uptake decreased in the order of Cr³⁺ > Zn²⁺ > Ni²⁺. For initial heavy metal concentrations of 20-250 mg/L at nonadjusted pH, the adsoption of heavy metal ions was well described by the pseudo second-order kinetic model and was well fitted by the Langmuir isotherm model. The maximum uptake of heavy metal ions obtained from the Langmuir model, decreased in the order of Zn²⁺ > Ni²⁺ > Cr³⁺, differing from the effect of pH on the uptake, which was mainly based on the different pH of the solutions.

• Journal of Environmental Science International
• /
• v.8 no.2
• /
• pp.211-219
• /
• 1999

Surface complexation models(SCMs) have been performed to predict metal ion adsorption behavior onto the mineral surface. Application of SCMs, however, requires a self-consistent approach to determine model parameter values. In this paper, in order to determine the metal ion adsorption parameters for the triple layer model(TLM) version of the SCM, we used the zeta potential data for Zeolite and Kaolinite, and the metal ion adsorption data for Pb(II) and Cd(II). Fitting parameters determined for the modeling were as follows ; total site concentration, site density, specific surface area, surface acidity constants, etc. Zeta potential as a new approach other than the acidic-alkalimetric titration method was adopted for simulation of adsorption phenomena. Some fitting parameters were determined by the trial and error method. Modeling approach was successful in quantitatively simulating adsorption behavior under various geochemical conditions.

• Analytical Science and Technology
• /
• v.15 no.2
• /
• pp.163-171
• /
• 2002

The adsorption characteristics of Cd(II) and Pb(II) ions has been studied by using chitin as an adsorbent. The pure chitin was obtained from the extraction of red-crab shell dumped by fish factory. Adsorption kinetics of Cd(II) and Pb(II) ions on the chitin reached at the maximum adsorption within two minutes. Adsorbed amounts of heavy metals were pH 7.0>10.5>3.5 in the following order. Adsorption ratio by chitin was 21${\sim}$99% for Cd(II) ion and 24${\sim}$95% for Pb(II) ion. Recovery ratio of Cd(II) ion on the chitin was 22${\sim}$53%, and that of Pb(II) ion was 22${\sim}$73%. The adsorption behavior of these heavy metals was explained well by Freundlich adsorption isotherm.

• Journal of Environmental Science International
• /
• v.1 no.2
• /
• pp.167-175
• /
• 1992

This study was conducted for an efficient utilization of waste fly ash obtained from the power plant. Fly ash was used for synthesizing zeolite. Na-Pl zeolite could be easily synthesized from waste fly ash and showed the potential to remove heavy metal ions. The synthetic zeolite showed good adsorption property for heavy metal much better than raw fly ash and natural zeolites. Na-Pl exhibited the high adsorption efficiency with a maximum value of 260 Pb mg/g and strong affinity for Pb2+ ion. The metal ion selectivity of Na-Pl was determined in a decreasing order : $Pb^{2+}$>$Cd^{2+}$>$Cu^{2+}$+>$Zn^{2+}$>$Fe^{3+}$

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.1 no.2
• /
• pp.167-175
• /
• 1997

This study was conducted for an efficient utilization of waste fly ash obtained from the power plant. Fly ash was used for synthesizing zeolite. Na-P1 zeolite could be easily synthesized from waste fly ash and showed the potential to remove heavy metal ions. The synthetic zeolite showed good adsorption property for heavy metal much better than raw fly ash and natural zeolites. Na-P1 exhibited the high adsorption efficiency with a maximum value of 260 Pb mg/g and strong affinity for $Pb^{2+}$ ion. The metal ion selectivity of Na-P1 was determined in a decreasing order : $Pb^{2+}>Cd^{2+}>Cu^{2+}>Zn^{2+}>Fe^{3+}$.

• Journal of Environmental Science International
• /
• v.8 no.4
• /
• pp.491-496
• /
• 1999

Removal of Cu(II), Cr(III) and Pb(II) ions from aqueous solutions using the adsorption process on the loesses has been investigated. Variations of contact time, pH, adsorption isotherms and selectivity of coexisting ions were experimental parameters. pH of KJ and YIK samples diluted to 1% solution, was rearly the same with each value of pH 5.58 and 5.49, and both samples showed weak acidic properties. From chemical analysis, both samples contain remarkably different amounts of ${SiO}_{2}$, ${Al}_{2}O_{3}$ and ${Fe}_{2}O_{3}$. From XRD measurement, quartz was mainly observed in both samples. Kaolinite was also observed, also in both samples, but Feldspar was only observed in KJ sample. Adsorption of metal ions on the loesses were reached at equilibrium by shaking for about 30min. The adsorption of Cr(III) ion was higher than that of Cu(II) oand Pb(II) ions. The order of amount adsorbed among the investigated ions was Cr(III)>Pb(II)>Cu(II). In acidic solution, the adsorptivity of loesses was increased as pH increased. The adsorption of Cr(III) ion on the loesses were fitted to the Freundlich isotherms. Freundlich constants(1/n) of KJ and YIK loesses were 0.54 and 0.55, respectively.

• Journal of Environmental Science International
• /
• v.19 no.9
• /
• pp.1177-1185
• /
• 2010

To examine the potency of biosorbent, the adsorption capacity of Pseudomonas cepacia H42 isolated from fresh water plant root was compared with Saccharomyces cerevisiae SEY2102 on bases of biomass, concentration of heavy metal, presence of light metals, immobilized cell, and ion exchange resin. P. cepacia H42 biomass of 0.05-0.5 g/L increased adsorption and above 1.0 g/L of yeast biomass was the most effective in adsorption. By applying the same amount of biomass, lead showed the highest adsorption on two strains and the adsorption strength was lead>copper>cadmium on both strains. The high heavy metal concentration induced the high adsorption capacity. P. cepacia H42 adsorption was in the order of copper>lead>cadmium and lead>copper>cadmium by yeast in 10 mg/L. Both strain showed same adsorption strength in the order of lead>copper>cadmium in 100 mg/L and 1000 mg/L. The adsorption capacity of both yeast and P. cepacia H42 was decreased in the presence of light metals and the order of cadmium>copper>lead. $Mg^{2+}$ induced the least adsorption while $Na^+$ induced highest adsorption. The adsorption capacity of immobilized yeast and P. cepacia H42 was detected between 200-400 mL in flow volume and decreased in the presence of light metals. Ion exchange containing light metals caused 30-50% adsorption reduction on both strains.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.5
• /
• pp.781-787
• /
• 2001

The binding of heavy metals by a biosorbent with binary functional groups was mathematically modeled. An FT-IR spectrophotometer analysis was employed to determine the stoichiometry between the protons in the functional groups of alginic acid and lead ions as a model system. The results calculated using an equilibrium constant agreed well with the experimental results obtained under various operating conditions, such as pH and metal ion concentration. It was also shown that the overall adsorption phenomenon of alginic acid was mainly due to its carboxyl groups. The equilibrium constants for each functional group successfully predicted the lead adsorption of ${\alpha}$-cellulose. Furthermore, the biosorption model could predict the adsorption phenomena of two metal ions, lead ions and calcium ions, relatively.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.629-636
• /
• 2003

The retardation of heavy metals in a mixture of fly ash and bentonite was studied as a potential barrier material for a landfill. Column tests were conducted using synthetic leachate having 100 mg/L and 50 mg/L of lead (Pb) and cadmium (Cd), respectively. Results indicated that the mixture had obvious retardation ability for heavy metals. To investigate the retardation factor caused by adsorption, batch adsorption tests were conducted at various concentrations. Test results were correlated with both Langmuir and Freundlich isotherms. The adsorption of the lead ion was applicable to the Langmuir isotherm and the adsorption of the cadmium ion was applicable to the Freundlich isotherm. In addition, based on experimental results, the migration characteristics of heavy metals through the bed of fly ash and bentonite mixture were investigated using the PHREEQC, a reactive transport model, under the real conditions of the landfill liner.