• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.4 no.1
• /
• pp.25-32
• /
• 1999

In order to examine the degree of heavy metal pollutions around Samcheonpo and Youngkwang power plants, marine sediment samples were analyzed to determine heavy metal contents. Some of these sediment samples were also analyzed by using of a sequential extraction technique to know geochemical forms of the metals. The results showed that the spatial distribution of heavy metals coincided very well with those of mean grain size, carbonates and organic matters. The chemical speciation data using sequential extraction analysis also showed that a considerable amount of heavy metals except for Mn were bounded in the residual fraction, which mode of occurrence of heavy metals was generally interpreted as being the result of the lithogenic origin.

• Journal of Environmental Health Sciences
• /
• v.26 no.2
• /
• pp.116-121
• /
• 2000

This study was performed to investigate the heavy metal contents and distribution in bioorganisms from the estuary area of Mankyeong-Dongjin river. In paddy plant, the average contents of heavy metals were in order of Zn>Cu>Pb>Cr>Cd in all parts. Those of Cd, Cr, Pb and Cu were all highest in the leaf while lowest in the brown rice. The average content of Zn was almost similar in all parts. In the dried muscular parts of shellfish, the average contents of heavy metals were in the range of 1.06~1.95 mg/kg for Cd, 2.93~4.98 mg/kg for Cr, 0.90~1.17 mg/kg for Pb, 8.41~18.58 mg/kg for Cu and 29.81~67.31 for Zn, respectively, In fish(Acanthogobius hasta), the average contents of heavy metals in the dried body parts were in the range of 0.05~0.43 mg/kg for Cd, 0.65~4.59 mg/kg for Cr, 1.01~4.75 mg/kg for Pb and 1.34~4.19 mg/kg for Cu, with high accumulation in bone and head overally.

• Journal of Korean Society of Water Science and Technology
• /
• v.26 no.6
• /
• pp.43-51
• /
• 2018

In order to systematically and scientifically manage the organic and heavy metals against sediment at Daecheon Port, this study conducted particle composition, organic materials and heavy metals irradiation studies of sediments. Analysis of the grain size composition of sediments in the target study area showed the distribution characteristics of the mix of sand, silt and clay. That is, Station C (Stn. C) showed superior by fine-grained sediment, Station A and B (Stn. A and B) showed superior by coarse-grained sediment. The organic matter(COD, TOC, and IL) of Stn. C was appeared to be heavily polluted more than Stn. A and B. These data for the spatial properties in sediment showed that organic matter was related positively to the sediment silt-clay content. Also, in the case of heavy metals contamination in surface sediments, Stn. C was higher than Stn. A and B. Particularly, at the Stn. C, high organic matter concentration and C/N ratio value( >10) indicated that the sediment was composed highly of land-derived organic matter. From these results, it considered that the correlation analysis among to silt-clay, organic matter and heavy metal was found to have a good interrelationship.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2002.04a
• /
• pp.20-22
• /
• 2002

Heavy metal level and distribution in sediments and bivalves from the tidal flats along the mid-western coast, Korea, were investigated. The averages of heavy metal concentrations in sediments from 5 sampling sites ranged from 86.35-187.77mg/kg for Mn, 13.25-17.73mg/kg for Zn, 6.80-11.85mg/kg for Cr, 4.28-6.25mg/kg for Ni, 1.85-3.09mg/kg for Cu, 0.004-0.020mg/kg for Cd and 5.70-10.41mg/kg for Pb, respectively. Among the mussels of the limited body size(8.5-11cm), heavy metal concentration both in the flesh and in the whole soft parts were not strongly related to the body size. It was shown that, in S. strictus, Cu moves fast into the flesh after absorption, but Pb and Fe move very slowly. Overally, the heavy metal concentration in the flesh tends to increase with that in the whole soft parts. The concentration factors(heavy metal concentration in S. strictus/heavy metal concentration in sediment) showed that, of the examined metals, Cd is the most cumulative in the body of S. strictus, followed by Zn and Cu, while Mn, Cr, Ni and Pb are not cumulative.

• Environmental Analysis Health and Toxicology
• /
• v.31
• /
• pp.6.1-6.10
• /
• 2016

Objectives This study examined the spatial distribution and the extent of soil contamination by heavy metals resulting from primitive, unconventional informal electronic waste recycling in the Agbogbloshie e-waste processing site (AEPS) in Ghana. Methods A total of 132 samples were collected at 100 m intervals, with a handheld global position system used in taking the location data of the soil sample points. Observing all procedural and quality assurance measures, the samples were analyzed for barium (Ba), cadmium (Cd), cobalt (Co), chromium (Cr), copper (Cu), mercury (Hg), nickel (Ni), lead (Pb), and zinc (Zn), using X-ray fluorescence. Using environmental risk indices of contamination factor and degree of contamination ($C_{deg}$), we analyzed the individual contribution of each heavy metal contamination and the overall $C_{deg}$. We further used geostatistical techniques of spatial autocorrelation and variability to examine spatial distribution and extent of heavy metal contamination. Results Results from soil analysis showed that heavy metal concentrations were significantly higher than the Canadian Environmental Protection Agency and Dutch environmental standards. In an increasing order, Pb>Cd>Hg>Cu>Zn>Cr>Co>Ba>Ni contributed significantly to the overall $C_{deg}$. Contamination was highest in the main working areas of burning and dismantling sites, indicating the influence of recycling activities. Geostatistical analysis also revealed that heavy metal contamination spreads beyond the main working areas to residential, recreational, farming, and commercial areas. Conclusions Our results show that the studied heavy metals are ubiquitous within AEPS and the significantly high concentration of these metals reflect the contamination factor and $C_{deg}$, indicating soil contamination in AEPS with the nine heavy metals studied.

• Korean Journal of Environmental Agriculture
• /
• v.34 no.1
• /
• pp.64-68
• /
• 2015

BACKGROUND: Heavy metals (Al, As, Cd, Cr, Cu, Li, Hg, Ni, Pb, and Zn) were analyzed to elucidate the impact of weir construction on their concentrations in sediments of Geum River, Korea. We also attempted to investigate the source of the heavy metals in sediments. METHODS AND RESULTS: For this study, sediments were collected from May through June in 2012. The concentrations of heavy metals except Hg were determined by inductively coupled plasma mass spectrometer, and Hg was measured by automatic mercury analyzer. More clay were accumulated in the furthest stations in the upstream direction starting from the weirs. Most of the heavy metals showed higher concentrations in the most upstream located station of Geumnam Weir. However, high concentrations were not observed in the most upstream stations of the other weirs. The concentrations of Hg and As were much higher in sediments of Gap Stream. CONCLUSION: Gap Stream may be a potential source for high deposits of As and Hg. Presence of the dams may not play an important role in controlling heavy metal concentrations in sediments. It is necessary to monitor heavy metal concentrations for a longer time period to study the effect of environmental changes on heavy metal distribution in Geum River.

• Journal of Powder Materials
• /
• v.26 no.3
• /
• pp.201-207
• /
• 2019

Tungsten heavy alloys (W-Ni-Fe) play an important role in various industries because of their excellent mechanical properties, such as the excellent hardness of tungsten, low thermal expansion, corrosion resistance of nickel, and ductility of iron. In tungsten heavy alloys, tungsten nanoparticles allow the relatively low-temperature molding of high-melting-point tungsten and can improve densification. In this study, to improve the densification of tungsten heavy alloy, nanoparticles are manufactured by ultrasonic milling of metal oxide. The physical properties of the metal oxide and the solvent viscosity are selected as the main parameters. When the density is low and the Mohs hardness is high, the particle size distribution is relatively high. When the density is high and the Mohs hardness is low, the particle size distribution is relatively low. Additionally, the average particle size tends to decrease with increasing viscosity. Metal oxides prepared by ultrasonic milling in high-viscosity solvent show an average particle size of less than 300 nm based on the dynamic light scattering and scanning electron microscopy analysis. The effects of the physical properties of the metal oxide and the solvent viscosity on the pulverization are analyzed experimentally.

• Journal of Environmental Impact Assessment
• /
• v.9 no.4
• /
• pp.339-348
• /
• 2000

This study was conducted to investigate the distribution pattern of plants on the streamside of Goggyochun, and to survey the distribution of heavy metal-contaminated soils and plants. A total of 11 survey sites were selected along the Goggyochun during the period of between June and September 1999. The wet land plants were composed of 44 species. The most frequently occurring species in the study sites were Rumex crispus, Persicaria hydropiper, Cyperus amuricus and Setaria viridis, and among them the Humulus japonicus, Erigeron canadensis and Phragnites communis species were dominants of the community. Analysis of soil properties showed that organic matter and clay contents were higher in the upstream region while sand content was higher in the downstream region. The pH and the organic matter contents of soils were at range of 6.70-9.94 and 2.39-15.16% respectively. The average contents of Pb and Cd in soils were 11.96mg/kg and 1.64mg/kg respectively, and these values were higher as compared with those of ordinary soil in Korea. The average contents of Zn and Pb in Persicaria hydropiper were 8.30mg/kg and 7.38mg/kg respectively, and these values were higher than other plants. The distribution of heavy metals in plants varied in accordance with the species regardless of the sites.

• Economic and Environmental Geology
• /
• v.36 no.1
• /
• pp.17-25
• /
• 2003

Researches were carried out to investigate the characteristics and concentration of heavy metal elements of stream water through Dongmyoung abandoned metal mine and soil adjacent to the mine. The pH range of water was 5.9∼7.1 that implies the water environment was acidic to neutral. The contents and distribution aspects of heavy metals in water samples varied with geochemical characteristics of element, but the concentration of heavy metals has the tendency of increase closer to the mine in general. The results of soil analysis show that total heavy metal concentration of agricultural soil near mine was far lower than those of ore tailing and dumping site. Therefore, the effects of the abandoned mine on stream water and agricultural products were supposed to be insignificant, particularly because the portion of absorbed carbonates and reducible fractions among total heavy metal concentration was relatively lower than the other. Since, however total heavy metal concentrations of mining site were relatively higher than those of adjacent region, there is a possibility of heavy metal difussion when the chemical environment of the site changes due to migration of surface and underground water. It is suggested that the preventive measures for water and soil pollution by the heavy metals would be considered around the region.

• Journal of Environmental Science International
• /
• v.11 no.12
• /
• pp.1299-1305
• /
• 2002

Thirty sediment samples of the <63${\mu}{\textrm}{m}$ fraction collected from the southwestern coast of Korea were analysed for their heavy metal (Fe, Mn, Cr, Co, Cu, Ni, Zn and Pb) concentration. The results show that sediment texture plays a controlling role on the total metal concentrations and their spatial distribution. A single lM HCl extraction procedure was used in order to assess the environmental risk of heavy metals in bottom sediments. The non-residual fraction was the most abundant pool for Mn and Pb in most samples, which means that this metals are highly avaliable in these sediments. Cr, Ni, Fe, Co, Zn and Cu were mainly associated with the residual fraction, suggesting that their concentrations are controlled significantly by transport processes with the fine particles as carriers from diffuse pollution source. Concentration enrichment ratios(CER) were calculated from the non-residual contents and their values allowed us to classify the sediments according to their environmental risk.