• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.1
• /
• pp.70-75
• /
• 1992

This study was carried out to investigate the characteristics of a mutant, Pseudomonas maltophilia H-8M selected with the treatment of Pseudomonas maltophilia H-8 by N-methyl-N-nitro-N-nitrosoguanidine(MNNG). This mutant showed highest ability of cadmium accumulation. The growth rate of Pseudomonas maltophilia H-8M showed about 80% in 1000ppm Cd containing medium when compare with control for 36h at $30^{\circ}C$. Pseudomonas maltophilia H-8M not inhibited on the growth in addition of various heavy metal such as $Hg^{2+}$, $Zn^{2+}$, $Pb^{2+}$, $Cu^{2+}$, $Cr^{2+}$ and $Co^{2+}$, but inhibited in $Sn^{2+}$ containing medium, respectively. Pseudomonas maltophilia H-8M was accumulated the highest cadmium level of 62.3% on whole cell in the medium containing 50 ppm and 80% of accumulated cadmium was distributed in the cell wall.

• Resources Recycling
• /
• v.17 no.3
• /
• pp.3-9
• /
• 2008

The measurement of physicochemical properties and chemical composition of SSA(sewage sludge ash) has been carried out and the preparation of lightweight material has also been performed using SSA for reuse as building or construction materials. For this aim, lightweight material has been prepared by forming the mixture of SSA, lightweight filler and inorganic binder followed by calcination at elevated temperature and characterized in terms of density and compressive strength. The pH of fly ash was found to be slightly alkaline, pH 8.69, due to the addition of caustic soda in order to neutralize the acidic gas while the pH of bottom ash was 6.48 Heavy metal leachability based on the standard leach test was also found to be below the detection limit for Cd, Cu, Pb, As and Cr of SSA. As far as the compressive strength of lightweight material was concerned, the compressive strength of lightweight material using fly ash was higher than that of lightweight material using bottom ash.

• Ecology and Resilient Infrastructure
• /
• v.2 no.3
• /
• pp.237-246
• /
• 2015

Heavy metal pollution in soil, such as lead contamination, has become an area of interest in Korea because of urbanization and atmospheric deposition from neighboring countries. Therefore, in this research, eco-physiological responses such as chlorophyll contents, antioxidant enzyme activity, photosynthetic rate, biomass and phytoaccumulation abilities were investigated for 4 commonly used native roadside tree species to suggest suitable tree species to cope with lead contamination. The target species, Ginkgo biloba, Prunus yedoensis, Zelkova serrata and Chionanthus retusus showed lead toxicity by significant changes of chlorophyll contents and antioxidant enzyme activities on treatments over 200 mg Pb/kg. However, biomass and photosynthetic rates only showed significant responses of plants in the highest level (5,000 mg/kg) treatment. Especially, G. biloba did not show any significant changes of antioxidant enzyme activity, photosynthetic rate, and biomass even in the highest level treatment. In low level - environmentally realistic treatments, G. biloba and P. yedoensis showed the highest phytoaccumulation rate of lead from soil. Selecting and planting species like G. biloba which have good phytoaccumulation abilities and resistance to lead contamination by further research will be required to deal with emerging lead contamination.

• Analytical Science and Technology
• /
• v.19 no.4
• /
• pp.285-289
• /
• 2006

In this study, the effect of an acidic treatment on granular activated carbon (GAC) and activated carbon fibers (ACF) was investigated for a $Pb^{2+}$ and $Ni^{2+}$ ion adsorption. 1.0 M nitric acid solution was used as the acid solution for the surface treatment. Surface properties of the GAC and ACF were characterized by the pH, elemental analysis and pHpzc (pH of the point of zero charge). Their specific surface area and the pore structure were also evaluated by the nitrogen adsorption data at 77K. As a result, the acidic treatment led to an increase of the oxygen-containing functional groups. Furthermore, the adsorption capacity of the acid-treated GAC and ACF was improved in the order of acidic-ACF > untreated-ACF > acidic-GAC > untreated-GAC, though the decrease in specific surface area induced by a pore blocking of the functional groups was observed.

• Journal of Food Hygiene and Safety
• /
• v.35 no.4
• /
• pp.341-353
• /
• 2020

In accordance with the implementation of the Positive List System (PLS), the proper usage of pesticides is now being enforced. It is assumed that unregistered pesticides are being used on agroforestry products due to the low number of registered pesticides in the agricultural industry. In this study, pesticide and heavy metal residues were investigated in 13 types of products to determine the status of usage. The levels (%) of pesticides detected in Pimpinella beachscape, Platycodon grandiflorum, Codonopsis lancekolate, Artemisia dubia, Angelica gigas, Pyrus pyrifolia, and Punica granatum were 40.0, 20.0, 26.7, 13.3, 56.3, 57.1, 33.3, 26.7, 66.7, and 46.7%, respectively, while, those in Petridium aquilinum, Disoscorea batata and Senna tora were zero. Heavy metals (Pb, Cd) were detected only from P. grandisflorum and A. dubia. The pesticide usage and registration data by agroforestry product obtained in the study will be useful in the future for ensuring the safety of domestic agroforestry products.

• Economic and Environmental Geology
• /
• v.56 no.3
• /
• pp.229-238
• /
• 2023

Bentonite is a type of rock that has been used as a traditional mineral medicine. It has a variety of pharmacological activities, and is used in traditional Korean medicine to treat jaundice, diarrhea, and hemostasis. In modern medicine, it is used as a raw material and additive for medicines such as antacids, gastrointestinal protective agents, and laxatives. Bentonite produced in Korea was produced through diagenesis or hydrothermal alteration of tertiary volcanic debris distributed in the Pohang and Gyeongju areas. It is mainly used for industrial purposes such as papermaking, paint, civil engineering, casting, and animal feed. Recently, technology is being developed to use it in cosmetics and pharmaceuticals. In this study, the geochemical characteristics of bentonite were identified by analyzing the main components and trace elements of 40 and 21 types of bentonite produced in the Gampo Gyeongju and Yeonil Pohang area. Also it were classifed by formation envrionment of bentonite deposits in the Gampo and Yeonil. As a result of the study, bentonite from the reserch area may be cased by argillic alteraton that alkali elements are removed form basaltic rocks by hydrothermal fluids and AI-CCPI alteration indices wrere also indentified argillic alteraton. It was found that there is a correlation between the behavior characteristics of heavy metal elements (P b, Cr, As) and the hydrothermal alteration of bentonite in the reserch area.

• Journal of Environmental Health Sciences
• /
• v.49 no.2
• /
• pp.66-77
• /
• 2023

Background: Along with the increase in consumer interest in and consumption of tattoo products, the controversy over harmful heavy metals associated with the use of tattoo cosmetics is also increasing. Therefore, investigation of hazardous metals in these tattoo products is needed. Objectives: This study was performed to provide useful data for establishing reasonable standards to securely manage tattoo cosmetics, tattoo stickers, and tattoo inks distributed in the market. Methods: Thirteen kinds of hazardous metal contents (Pb, As, Cd, Sb, Ni, Co, Cu, Cr, Se, Ba, Zn, Sn, and Hg) were analyzed for 23 tattoo cosmetics, ten tattoo stickers, and 16 tattoo inks. Hg was measured through the combustion-gold amalgamation method, and other hazardous metals were measured by inductively coupled plasma-mass spectrometry (ICP-MS) after acidic decomposition using a microwave apparatus. Results: The detected ranges of Pb, As, Cd, Sb, Ni, and Hg in tattoo cosmetics were 0.07~1.18, 0.06~0.41, ND~0.07, 0.01~3.44, 0.12~2.75, and ND~0.01 ㎍/g, respectively. All of the hazardous metals detected were below the recommended maximum standards of the Ministry of Food and Drug Safety. The mean amount of Pb detected in tattoo stickers for children was 0.24 ㎍/kg and Cd was not detected, meaning both metals met the recommended criteria. There was no statistically significant difference in all measured metals between children's tattoo stickers and adults' tattoo stickers. In the results of the study on the hazardous metal content of tattoo inks, four products (25%) for Pb, one product (6%) for As, 13 products (81%) for Ni, four products (25%) for Cu, and five products (31%) for Zn exceeded the recommended standards approved by the government. The highest predicted exposure amount for hazardous metals exceeding the recommended level of tattoo inks in a single tattooing was 5.69 ㎍/kg for Ni, 8.51 ㎍/kg for Zn, 0.44 ㎍/kg for Pb, 8.07 ㎍/kg for Cu, 0.44 ㎍/kg for As, and 71.36 ㎍/kg for Ba. Conclusions: It is necessary to prepare criteria for content limitation for the management of Co, Cr, Ba and Se tattoo cosmetics, and tattoo inks require thorough quality control.

• Korean Journal of Soil Science and Fertilizer
• /
• v.36 no.5
• /
• pp.323-332
• /
• 2003

This study was carried out to provide information for the present status of soil pollution near abandoned old-zinc mining area through analysis of bound form and 0.1 N-HCl extractable concentrations of heavy metals in soils and plants. Feasibility of endemic plants for phytoremediation was evaluated by the investigation of vegetation in soils. Cd contents of the selected samples near old-zinc mining soils ranged from 0.2 to $42mg\;kg^{-1}$. Nonagricultural soils near the mining area contained great amounts of Zn, Pb, Cd, and Cu than the paddy and upland soils. Some Korean wild plants, Artemisia princeps, Artemisia montana, Erigeron canadensis, and Pueraria thunbergiana, were found to grow vigorously in the studied area. Among them, Artemisia princeps was selected as a possible phytoremediator for cleaning heavy metal contaminated soils. Artemisia princeps contained about 43 and $52mg\;kg^{-1}$ of Cd in their root and shoot as dry weight, respectively. Average contents of Cd in the rhizosphere soil, $15.68mg\;kg^{-1}$, was slightly higher than the soil-root interface soils, $14.1mg\;kg^{-1}$. Sequential extraction of Cd contaminated soils showed that average $2.4mg\;kg^{-1}$ (about 7%) of cadmium existed as exchangeable form and the average amounts increased as follows : adsorbed < organically bound < exchangeable << oxide carbonate << sulfide residual fractions. Amendment of organic by-product fertilizer in metal-contaminated soils promoted the growth of roots significantly as compared with the other treatments containing chemical fertilizer.

• Korean Journal of Ecology and Environment
• /
• v.39 no.4 s.118
• /
• pp.450-461
• /
• 2006

In this study, sorption kinetics of lead (Pb) and cadmium (Cd) onto coastal sediments were investigated at pH 5.5 using laboratory batch adsorbers. Four different models: one-site mass transfer model (OSMTM), pseudo-first-order kinetic model (PFOKM) ,pseudo-second-order kinetic model (PSOKM) and two compartment first-order kinetic model (TCFOKM) were used to analyze the sorption kinetics. As expected from the number of model parameters involved, the three-parameter TCFOKM was better than the two-parameter OSMTM, PFOKM and PSOKM in describing sorption kinetics of Pb and Cd onto sediments. Most sorption of Pb and Cd was rapidly completed within the first three hours, followed by slow sorption in the subsequent period of sorption. All models predicted that the sorbed amount at the apparent sorption ($q_{e,s}$) equilibria increased as the CEC and surface area of the sediments increased, regardless of initial spiking concentration ($C_0$) and heavy metal and the sediment type. The sorption rate constant ($k_s,\;hr^{-1}$) in OSMTM also increased as the CEC and BET surface area increased. The rate constant of pseudo-first-order sorption ($k_{p1,s},\;hr^{-1}$) in PFOKM were not correlated with sediment characteristics. The results of PSOKM analysis showed that the rate constant of pseudo-second-order sorption ($k_{p2,s},\;g\;mmol^{-1}\;hr^{-1}$) and the initial sorption rate ($v_{o,s},\;mg\;g^{-1}\;hr^{-1}$) were not correlated with sediment characteristics. The fast sorption fraction ($f_{1,s}$) in TCFOKM increased as CEC and BET surface increased regardless of initial aqueous phase concentrations. The sorption rate constant of fast fraction ($k_{1,s}=10^{0.1}-10^{1.0}\;hr^{-1}$) was much greater than that of slow sorption fraction ($k_{2,s}=10^{-2}-10^{-4}\;hr^{-1}$) respectively.

• Analytical Science and Technology
• /
• v.23 no.3
• /
• pp.284-294
• /
• 2010

In this study, river water-based reference materials (RMs), NIER-I08RW and NIER-I09, for trace metal analysis were prepared and certified for Pb, Cd, Cr and Cu with evaluation of uncertainties. The RMs were confirmed to be homogeneous enough to be used as proficiency testing materials since within-bottle homogenieties of the RMs were lower than 0.3 times of targeted standard deviation of proficiency testing. The RMs were distributed to environmental testing laboratories for the proficiency testing and the variation of Z scores of the proficiency testing results were compared for different assigned values. The relative bias, $B_{relative}$, deviations between reference values and consensus values, were lower than ${\pm}$1 except for cadmium of NIERI08RW. The results showed both values were in a good agreement and only 2.9% of Z scores changed by using a different assigned values such as consensus and reference values.