• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.445-448
• /
• 2004

Radio frequency and microwave dielectric heating are well-known electroheating methods, used in industrial applications where non electrically conducting materials are to be heated, dried or otherwise processed. The major reason for considering this technique for any process is based on its unique ability to transfer heat into the volume of an electrically non conducting material such as insulator directly, rather than, via a surface. Conventional heating must first bring heat to the product surface and there after it depends on the physical characteristics and condition of the material as to how effectively this heat is transmitted into the mass. The product would suffer surface damage before the main body is adequately processed. Dielectric heating is applied to enhance conventional heating methods and to drastically shorten the required processing duration. Although the use of dielectric heating has been a well proven technique for several years in some industries, its application in the preheating of FRP has been limited by the insufficient experience. In this paper a method is described for uniform radio frequency heating of preheating of FRP.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.33 no.1
• /
• pp.58-66
• /
• 2013

This study was conducted in order to develop slaughterhouse rumen content (SRC) as a potential feed additive. The moisture content of SRC can reach 80%, and therefore an appropriate dewatering process is required before it can be used. In this study, the effects of heating temperature, heating time, and filler content during the dewatering process on the activity of various enzymes in SRC were investigated. The Box-Behnken experimental design was employed, involving a total of 45 experimental runs, consisting of three variables (heating time, heating temperature, and filler content) with three levels per variable (12, 30 and 48 hr; 60, 75 and $90^{\circ}C$; 12, 22.5 and 33% for heating time, heating temperature, and filler content, respectively). For enzyme activities, xylanase, cellulase, and amylase were examined, and the results were subjected to an analysis of variance. Heating time, heating temperature and filler content had significant effects on the activity of each enzyme (p<0.05). Cellulase and amylase activities decreased (p<0.05) at elevated heating temperatures, whereas xylanase was reasonably stable around $90^{\circ}C$. The activities of all enzymes decreased (p<0.05) with increased heating time. Optimum filler contents for xylanase, cellulase, and amylase activities were 22.5, 12 and 33%, respectively. However, optimum conditions for all variables that simultaneously maximize the activity of all three enzymes could not be ascertained in this study. Nevertheless, the results from the current study can be useful as basic information for the development of SRC as a feed additive enriched with improved major enzymes for livestock feed digestion.

• Food Science and Biotechnology
• /
• v.14 no.6
• /
• pp.732-737
• /
• 2005

The combinational effect of gamma irradiation and moist heating on the trypsin inhibitor activity (TIA) in soaked and dried soybeans was evaluated by measuring the inhibition using N-benzoyl-DL-arginine-p-nitroanilide (BAPNA) as substrate. Gamma irradiation significantly decreased the TIA level in soybean at doses above 5 kGy, and the $ID_{50}$ (the gamma irradiation dose required to reach 50% inhibition) value for TIA was 13.53 kGy. Soaking prior to gamma irradiation significantly lowered the $ID_{50}$ to 8.44 kGy, and the soaking process enhanced the efficiency to inactivate TIA by as much as 48%. When soaking prior to gamma irradiation was followed by subsequent mild heating ($60^{\circ}C$) process, the $IT_{50}$ (heating time required to reach the 50% inhibition of TIA) value at even 1 kGy (5.28 min) was greatly reduced by over 50% compared to the level for the no-soaking process. In addition, the activation energy of soaking prior to gamma irradiation at 1 kGy was 2.45 kcal/mole, which was also about 50% lower than the 5.10 kcal/mole of dried soybean gamma-irradiated. Based on these results, soaking prior to gamma irradiation is an effective method for TIA inhibition. Furthermore, a combination of two or more processing methods such as soaking, heating and gamma irradiation is much more effective than any single processing method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.2
• /
• pp.666-671
• /
• 2014

Using positive temperature coefficient (PTC) heater as supplementary heating for diesel engine vehicles with low heat source is a good method to enhance the heating performance during cold start. In this study, the PTC elements were made by using screen printing process for forming ohmic contact layer, and prototype of PTC heater was designed and made for a diesel engine vehicle. In process of designing the PTC heater, the thermal flow analysis of PTC element modules was conducted for verifying the effect of the shapes of contact surface between each of the components (cooling fin, insulator, ceramic element). We also investigated the performance characteristic (heating capacity, energy efficiency, pressure drop) of the PTC heater through the experiments. Therefore, the experimental results indicated that prototype of PTC heater had satisfactory performance. This study will be basis for improving the manufacturing process and increasing the performance of the PTC element and heater.

• Proceedings of the KWS Conference
• /
• 2006.05a
• /
• pp.187-189
• /
• 2006

Transient finite element method for analysis of moving coil needs many number of elements and much time to make calculation. Therefore, induction heating process for moving coil was simulated by traveling the position of the heating planes in this paper. In the magnetic and thermal analyses, temperature-dependent magnetic and thermal material properties were considered. Finite element program was developed and finite element results were compared with the experimental results.

• Proceedings of the KWS Conference
• /
• 2002.05a
• /
• pp.149-151
• /
• 2002

In this study, a formula for thermal processing induced plate deformations, in terms of process parameters such as heat input and plate thickness, is developed analytically using an infinite laminated plate theory to consider cuboidal inclusion with an eigenstrains. When a plate has arbitrary heating lines, complex deformed shape of plate was calculated by the method estimating plate deformation proposed by this study. To make a curved surface of the ship hull, the line heating method is mainly used. Application in automatization of line heating was deliberate by using proposed method.

• Textile Coloration and Finishing
• /
• v.18 no.6 s.91
• /
• pp.69-79
• /
• 2006

The washing characteristics of steam jet heating process have been compared with other washing processes, such as low temperature process(standard process, below $40^{\circ}C$) and high temperature process(boiling process, up to $95^{\circ}C$) with the standard soil fabric, EPMA 105. Steam jet heating process showed almost the same washing efficiency as high maximum temperature process for pig's blood and wine. This result can be explained with the higher surface temperature of washing materials in steam jet process compared with direct boiling process. In terms of the energy and water consumption, the steam jet washing process showed significant savings compared with direct boiling type washing process.

• Journal of Industrial Technology
• /
• v.25 no.B
• /
• pp.121-126
• /
• 2005

Micro wires manufactured by the straightening process are used in the BT(Bio-Technology), IT(Information-Technology), NT(Nano-Technology). We have developed a novel wire straightener which uses the direct heating method(DHM) for straightening the micro wire and shearing device for burr-less cutting. In this study, we confirm the tendency of micro wire after the shearing process. It is impossible to remove the burr in the shearing process. However, the embodiment of minimum burr size after the shearing process is the best in-process method. In order to minimize the burr size, we have accomplished the various experiment condition such as the U-groove, the effect of the counter punch, the shear angle, clearance.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.47-48
• /
• 2006

Oridinal thermal spray process has developed into two ways, namely, temperature dominated represented by plasma spraying, and velocity dominated represented by HVOF. It is common for both that the particle materials sprayed are basically in melted or half melted condition. New process has developed recently, that is, Cold Spray and Aerosol Deposition. Particle's heating is limited in CS lower than half of the material's melting point. Moreover, exactly no heating is loaded in AD process. Through the investigation on common feature for these three spraying processes, potential of new material process - Particle Deposition, PD - is considered and proposed.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.4
• /
• pp.528-536
• /
• 1999

This work studies the effects of transient reflectance on the thermal responses of a metal(gold) thin-film during ultrashort laser heating. The heating process is calculated using the conventional conduction model (parabolic one-step: POS), parabolic two-step model (PTS) with and without variable properties, hyperbolic two-step model (HTS). Results from the HTS model are very similar to those from the PTS model, since the laser heating time in this study is greater than the electron relaxation time. PTS model with variable properties, however, results in totally different temperature profiles compared to those from POS models or calculation with constant properties. Transient reflectances are estimated from electron temperature distributions and based on the linear relationship between the electron temperature and complex dielectric constants. Reflectance of the front surface can be changed with respect to dielectric constants, while those of the rear surface remain unchanged.