• Asian-Australasian Journal of Animal Sciences
• /
• 제15권8호
• /
• pp.1186-1190
• /
• 2002

One hundred and twenty nine primiparous sows were used to determine the effects of alternative processing procedures and feeding systems on the nutritional value of sorghum grain-based diets for lactating sows. Treatments were a ground sorghum control, steam-flaked sorghum and extruded sorghum fed in meal form and the ground sorghum control given as pellets or gruel (1:1 ratio of water and feed on a volume:volume basis). Average daily feed intake was greater for sows fed pelleted and gruel diet forms than sow fed the diets with steam-flaked and extruded sorghum (p<0.04). However, no differences occurred in sow weight or backfat losses among the treatments (p>0.14). Number of pigs weaned and livability rates were similar among treatments except that steam-flaked sorghum supported greater litter weight gains than extruded sorghum (p<0.02). Apparent digestibilities of DM, N and GE in sows fed steam-flaked and extruded sorghum were greater (p<0.001) than in sows fed pelleted or gruel diets. Of the various treatments, sows fed extruded sorghum tended to have the highest digestibilities of DM, N and GE, and lowest excretions of DM and N in the faeces. Severity of ulceration was not significantly affected by treatments (p>0.35), but keratinization was greatest for sows fed extruded sorghum (p<0.01). In conclusion, the alternative processing methods (steam-flaking and extrusion) and feeding system (pellets and gruel) had little effect on sow and litter performance. However, nutrient digestibilities were improved for all treatments that involved heating (steam flaking, extrusion and pelleting) and, thus, these treatments resulted in less fecal excretion of DM and N.

• 공업화학
• /
• 제21권5호
• /
• pp.570-574
• /
• 2010

기존 단열재의 주된 기능은 단지 열전달을 차단하는 기능과 건물로부터 열손실을 줄여주는 기능만을 수행했다. 반면, 축열재는 특정온도 범위 내에서 열에너지를 저장 또는 방출함으로써 건물에너지 사용량을 절감할 수 있다. 축열 건자재는 실내 공기온도 변화주기를 효과적으로 조절하여 일정하게 온도를 유지시킬 수 있다. 결과적으로 냉난방시스템 기능을 효율적으로 향상시킬 수 있다. 본 연구는 건축자재로 많이 이용되고 있는 석고보드에 상변화잠열물질을 축열재로 첨가하여 그 물성과 열환경 특성을 파악하였다. 또한 축열 건자재를 활용할 때 발생가능한 문제점을 확인하였다. 마지막으로 TVOC와 HCHO 함량 분석으로부터 오염물질의 배출가능성을 조사하여 축열 건자재의 환경 친화도를 검토하였다.

• 공업화학
• /
• 제19권4호
• /
• pp.445-451
• /
• 2008

마이크로파를 이용하여 휘발성유기화합물(VOCs; Volatile Organic Compounds)로 오염된 활성탄을 재생하기 위하여, 절연물질로서 활석(Talc)과 Ni-Zn ferrite를 각각 활성탄에 코팅하여 벤젠의 흡착 및 탈착 특성을 조사하였다. 절연물질이 코팅된 활성탄의 물리적 특성 및 표면상태는 질소가스 흡착장치와 주사전자현미경(SEM)을 이용하여 각각 확인하였다. 비표면적과 벤젠에 대한 흡착량은 비례관계를 보였고, 활성탄에 활석이나 Ni-Zn ferrite를 코팅하면 마이크로파에 의한 불꽃방전을 억제할 수 있었다. 활성탄에 절연물질을 코팅하기 위해 사용한 바인더는 PS (potassium silicate)가 벤젠에 대한 흡착성능이 가장 우수한 것으로 나타났다. 마이크로파 출력에 따른 탈착량은 출력에 비례하는 경향을 보였고, 연속되는 흡착과 탈착과정이 5회 반복되더라도 재현성이 충분히 나타났다. 결과적으로 VOCs로 오염된 폐활성탄의 재생방법으로서, PS를 바인더로 사용하여 활석이나 Ni-Zn ferrite를 활성탄에 코팅하여 마이크로파로 탈착시키면 효과적임을 알 수 있었다.

• 생물환경조절학회지
• /
• 제15권1호
• /
• pp.1-7
• /
• 2006

This study was conducted to develop a system and an control algorithm for control the environment of a plant factory. The greenhouse control system for environmental control was largely composed of a computer and a PLC. The screen of control program was composed of a greenhouse figure which was included machinery and equipments for greenhouse, the graph of environmental factors of inside greenhouse and the image of greenhouse. In order to reduce temperature change, the operation time of ventilation window was changed by 3 stage according to difference between a target and present temperature. When is heating, a temperature variation was shown to be $16.7{\pm}0.8^{\circ}C$. When is cooling, a temperature variation was shown to be $23.1{\pm}0.6^{\circ}C$. When is humidifing, a humidity variation was shown to be $39.3{\pm}1.6^{\circ}C$ %RH. An environmental control system and a control algorithm were proved that it was shown a good performance in a control accuracy. So a computer control system should be adapted to a control system of a greenhouse and a plant factory.

• 한국표면공학회지
• /
• 제53권3호
• /
• pp.104-108
• /
• 2020

ZnO single layer films (100 nm thick) and Au intermediated ZnO films (ZnO/Au/ZnO; ZAZ) were deposited on the glass substrate by RF and DC magnetron sputtering at room temperature and then the influence of the Au interlayer on the electrical and optical properties of the films were investigated. ZnO thin films show the visible transmittance of 90.3 % and sheet resistance of 63.2×10⁸ Ω/□. In ZAZ films, as Au interlayer thickness increased from 6 to 10 nm, the sheet resistance decreased from 58.3×10⁸ to 48.6 Ω/□, and the visible transmittance decreased from 84.2 to 73.9 %. From the observed results, it can be concluded that the intermediate Au thin film enhances the opto-electrical performance of ZnO films without intentional substrate heating.

• 한국지열·수열에너지학회논문집
• /
• 제10권1호
• /
• pp.7-13
• /
• 2014

This study intends to analyse the economical aspect of a GSHP(Ground Source Heat Pump) system compared to the conventional system which is consisted with a boiler and a chiller. This study has simulated four systems in Incheon. It developed and analyzed for applications in a residential and an office building which was based on the hourly EPI(Energy Performance Index, $kWh/m^2yr$). Case 1 is utilizing a boiler and a chiller to meet heating and cooling demand of a house. Case 2 is utilizing the same conventional set up as Case 1 of a office. Case 3 is summation of Case 1(house) and 2(office) systems and loads. And Case 4 is utilizing a GSHP to meet the combined loads of the house and office. The method of the economic assessment has been based on IEA ECBCS Annex 54 Subtask-C SPB(Simple Payback) method. The SPB calculated the economic balanced year of the alternative system over the reference system. The SPB of the alternative systems (GSHP) with 10%, 30% and 50% initial incentive has been calculated as 9.38, 6.72 and 4.06 year respectively while the SPB without initial incentive of systems was 10.71 year.

• 한국재료학회지
• /
• 제23권11호
• /
• pp.643-648
• /
• 2013

Activated carbon (AC) was synthesized from rice husks using the chemical activation method with KOH, NaOH, a combination of (NaOH + $Na_2CO_3$), and a combination of (KOH + $K_2CO_3$) as the chemical activating reagents. The activated carbon with the highest surface area (around $2000m^2/g$) and high porosity, which allows the absorption of a large number of ions, was applied as electrode material in electric double layer capacitors (EDLCs). The AC for EDLC electrodes is required to have a high surface area and an optimal pore size distribution; these are important to attain high specific capacitance of the EDLC electrodes. The electrodes were fabricated by compounding the rice husk activated carbons with super-P and mixed with polyvinylidene difluoride (PVDF) at a weight ratio of 83:10:7. AC electrodes and nickel foams were assembled with potassium hydroxide (KOH) solution as the electrolyte. Electrochemical measurements were carried out with a three electrode cell using 6 M KOH as electrolyte and Hg/HgO as the reference electrode. The specific capacitance strongly depends on the pore structure; the highest specific capacitance was 179 F/g, obtained for the AC with the highest specific surface area. Additionally, different activation times, levels of heating, and chemical reagents were used to compare and determine the optimal parameters for obtaining high surface area of the activated carbon.

• 설비공학논문집
• /
• 제20권4호
• /
• pp.274-279
• /
• 2008

In the perspective of saving energy in buildings, high performance of insulation and air tightness for improving the heating and the cooling efficiency has brought the positive effect in an economical view. However, these building energy saving technologies cause the lack of ventilation, which is the direct cause of increasing the indoor contaminants, and it is also very harmful to residents because they spend over 90% of their time in the indoor area. Therefore, the ventilation is important to keep indoor environment clean and it can also save energy consumption. In this study, a HEPA type breathing wall is designed as a passive ventilation system to collect airborne particles and to supply fresh outdoor air. To make fine porous structures, polymer nano fibers which were made by electro spinning method are used as a precursor. The nano fibers are coated with SiO2 nano particles and finally the HEPA type breathing wall is made by sintering in the electric furnace at $300\sim500^{\circ}C$. The pressure drops of nano ceramic structure are 8.2, 25.5 and 44.9 mmAq at the face velocity of 2.0, 5.9 and 8.8 cm/s, respectively. Also the water vapor permeability is $3.6g/m^2{\cdot}h{\cdot}mmHg$. In this research, the porous nano ceramic structures are obtained and the possibility for the usage of a material for HEPA type breathing wall can be obtained.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.919-924
• /
• 2008

Power consumption in the building thermal load could be the sum of the building fabric conduction load, building ventilation convection load and other such as radiation loss load. Dynamic Breathing Building (DBB) is the state-of-the-art to improve the wall insulation and indoor air quality(IAQ) performance as making air flow through the wall. This heat recovery type DBB contributes the power consumption saving due to the improved dynamic U-value. KIER twin test cell with static insulation(SI) and dynamic insulation(DI) at KIER was developed to test building power consumption at the real outside conditions. Then, the actual results were compared with the theory to predict the power consumption at the KIER twin test cell and introduced the building new radiation loss factor $\alpha$ to explain the difference between the both the theory and the actual case. As the results, the power consumption at the breathing DI wall building could saved 10.8% at the 2ACH(Air change per hour) compared with conventional insulation. The building radiation loss factor $\alpha$ for this test condition to calibrate the actual test was 0.55 in the test condition.

• Bulletin of the Korean Chemical Society
• /
• 제30권10호
• /
• pp.2253-2258
• /
• 2009

wet spun polyacrylonitrile (PAN) fiber precursors. The process variables chosen were treatment temperature, applied tension in stabilization process. The temperature profile of the stabilization was set on the basis of exothermic peaks of the differential scanning calorimetry (DSC) result. Both tensile strength and modulus increased with holding at onset temperatures of the exothermic peaks for extended duration, and with a higher heating rate up to the onset temperatures at a given applied tension among the experimental conditions. The increase in load monotonously increased the tensile modulus, on the other hand, the tensile strength was maximum at the load of 15 mg/filament (T15). The load 20 mg/ filament (T20) was considered to be exceeded to form oriented crystalline structure, possibly introducing more defects in the fiber than under load of T15. The sample CP3-T15 O5 H30 showed the best tensile properties among the samples experimented whose tensile properties are compatible with the commercialized grade of general purpose carbon fibers even at low carbonization temperature such as $800\;{^{\circ}C}$ (the carbonization temperature in the commercial process. 1300∼$1500\;{^{\circ}C}$).