• KSBB Journal
• /
• v.23 no.4
• /
• pp.335-339
• /
• 2008

Biodiesel is an alternative and renewable energy source, which is hoped to reduce global dependence on petroleum and environmental problem. Biodiesel produced from a variety of oil sources such as vegetable oil, animal fat and waste oils, and has properties similar to those associated with petro-diesel, including cetane number, volumetric heating value, flash point, viscosity and so on. In this study, we investigate the effect of quality of raw materials on alkali-catalyzed transesterification for producing of biodiesel. The increase of content of free fatty acid and water in oil were caused the sharp decrease of conversion yield. Also, the low purity of methanol in reactant was inhibited the reaction rate. In the case of addition of sodium sulfate as absorbent to prepare catalyst solution, the content of fatty acid methyl ester in product was increased more about 1.6% than that of control. However, the addition of zeolite, sodium chloride and sodium sulfate as absorbent in reactant to remove water generated from reaction did not show any enhancement in the reaction yield. This result may provide useful information with regard to the choice and preparation of raw materials for more economic and efficient biodiesel production.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2609-2614
• /
• 2007

Shell & Tube type Oil Cooler is widely used for hydraulic presses, die casting machines, generation equipments, machine tools and construction heavy machinery. Temperature of oil in the hydraulic system changes viscosity and thickness of oil film. They have a bad effect to performance and lubrication of hydraulic machinery, so it is important to know exactly the heat exchanging efficiency of oil cooler for controlling oil temperature. But most Korean manufacturers do not have test equipment for oil cooler, so they cannot carry out the efficiency test of oil cooler and it is impossible to verify its performance. This paper includes information of construction of necessary utilities for oil cooler test and design and manufacture of test equipment. One can select the optimum product by obtaining performance data through tests of various kinds of oil coolers. And also the paper developed a program which can be easily used for design of 2D and 3D drawings of oil cooler.

• Journal of the Korean housing association
• /
• v.18 no.3
• /
• pp.115-123
• /
• 2007

The purpose of this study was to examine how housing facilities have been progressed, how housing life has been technicalized and which factors contributed to the modernization of Korean housing in the economic development era. Review of advertising material for apartment sales in the newspaper from 1970s' to the 1990s' are mainly utilized to follow up the changes of kitchen equipment and furnitures, bathroom equipments, heating and cooking facilities and their fuel system, information and telecommunication system as well as security and intelligent system. However, high technology in apartment was a symbol of modem housing in each time. The improvement of housing facilities brought about the improvement of efficiency in household works. In other words, housing space plays as "Living Machine". And appearance of new technology systems leaded to a pluralistic activities in the home. As well as improvement on the material environments accelerated the individualization phenomena in housing space.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.1
• /
• pp.33-38
• /
• 2005

A cost-effective dense WDM-PON employing wavelength-locked Fabry-Perot lasers has been demonstrated. We have successfully demonstrated a dense WDM transmission of 4×622 Mb/s upstream signal with 50-GHz channel spacing over 30-km conventional single mode fiber. We have also investigated the heating noise characteristics of a wavelength-locked Fabry-Perot laser and showed the wavelength-locked Fabry-Perot laser suppresses the intensity noise of the incoherent light injected which enables a dense WDM transmission with a channels spacing of 50 GHz.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.11
• /
• pp.35-43
• /
• 1995

To obtain high quality of $Ta_{2}O_{5}$ film, two dielectric layers of $Si_{3}N_{4}$ and $Ta_{2}O_{5}$ were subsequently formed on Si wafer. Silicon nitride films were thermally grown in 10 Torr ammonia ambient by R.F induced heating system. The thickness of thermally grown $Si_{3}N_{4}$ film was able to be controlled in the range of tens $\AA$ due to the self-limited growth property. $Ta_{2}O_{5}$ film of 200$\AA$ thickness was then deposited on the as-grown $Si_{3}N_{4}$ film about 25$\AA$ thickness by sputtering method and annealed at $900^{\circ}C$in $O_{2}$ ambient for 1hr. Stoichiometry film was prepared by the annealing in oxygen ambient. Despite the high temperature anneal process, silicon oxide layer was not grown at the interface of the layered films because of the oxidation barrier effect of Si$_{3}$N$_{4}$ film. The fabricated $Ta_{2}O_{5}$/$Si_{3}N_{4}$ film showed low leakage current less than several nA and high dielectric breakdown strength.

• Proceedings of the KIEE Conference
• /
• 2003.10b
• /
• pp.216-219
• /
• 2003

The resonant inverter is widely used for induction heating, electronic ballast and supersonic motor driving circuit. In the meantime, control techniques of PWM, PFM etc.. are mainly applied to control the output power of the resonant inverter. But, in the case of using the half bridge resonant inverter, it is difficult to control the output power by PWM, because its main circuit does not provide the load free-wheeling mode. Therefore, PAM or PFM was usually applied to control output power of half bridge resonant inverter. However, PAM needs a variable DC voltage source, which makes the system structure more complex. On the other hand, in case of PFM, efficiency is declined by operation with poor power factor. This paper Proposed the novel half bridge resonant inverter which can provide the load free-wheeling mode. Also its analysis results for PWM operation with unity fundamental power factor are Presented and compared with other resonant inverters using PWM and PFM.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.8
• /
• pp.945-953
• /
• 2014

This study attempts to explore the connectivity among brand personality, shopping value, customer satisfaction and recommendation intention by deriving brand personality image factors of online shopping malls. The analysis results are as follows. First, the brand personality of shopping malls were derived as 'vital', 'familiar', 'credible', 'competent', and 'sophisticated.' Second, shopping value was derived as hedonistic and practical shopping values. Third, it was shown that brand personality of shopping malls has significant impacts on shopping value. In addition, customers' shopping value, customer satisfaction and recommendation intention have significant impacts on each other. It is expected that this study can provide basic information for constructing differentiated marketing strategies in the domestic online shopping malls whose competition is heating up.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.1
• /
• pp.149-158
• /
• 1998

The purpose of this study was to investigate the effect of age on the human thermoregulatory responses and to obtain the basic information of the Korean thermophysiological characteristics under the traditional Korean floor heating system-Ondol. The participants consisted of 10 elderly women, 4 elderly men(over 65 years), 10 young women and 5 young men(in twenties). They were exposed to temperature-controlled Ondol room(20$\pm$1$^{\circ}C$, 50$\pm$5%R.H., floor surface temperature: 30$\pm$1$^{\circ}C$) for 60 minutes and wore the same experimental clothing. The postures were performed sitting and supine on the floor. In each pose, rectal temperature, skin.temperature of 10 areas, mean skin temperature, clothing microclimate, body fat were measured. The results were as follows; 1. The rectal temperature gradually decreased and mean skin temperature gradually increased in young and old groups in both supine and sitting pose on heated Ondol floor for 60 minutes. 2. Rectal temperature was different in each pose. The rectal temperature decreased 0.1$^{\circ}C$ in both groups under the condition of sitting and decreased 0.2'c in elderly group under the condition of supine. In supine pose, elderly group was more declined than young group. Mean skin temperature increased 0.5$^{\circ}C$ in both poses, both groups.

• The Journal of the Korea Contents Association
• /
• v.5 no.6
• /
• pp.238-247
• /
• 2005

This study was to analyse participant's satisfaction according to the visiting purpose and experiences on the exhibition service, and also to suggest guideline for new standard evaluation in the operating exhibition service. The implications are as follows; firstly, surrounding environment showed significantly for merchandising & information participant's, and also stay cost & tourism service showed up general visiting purpose participant's. Secondly, it was showed significantly a place for refreshment, fire equipments, and ventilation & heating/air conditioning on the exhibition service. Third, government & exhibition authorized person should provide best environment through satisfaction factors in the exhibition service.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.26 no.1
• /
• pp.1-9
• /
• 2020

We evaluated the applicability of baking soda, charco'al, coffee, and green tea as a natural deodorant in Kimchi packaging. Moreover, to evaluate the potential usage of these deodorants in packaging materials and confirm their applicability in high-temperature melt-extrusion processing, the thermal stabilities of the deodorants were investigated, and heat-treated deodorants were evaluated in terms of the deodorizing function compared with non-treated deodorants. Aroma patterns were decreased after deodorizing treatment with all-natural deodorants. Dimethyl disulfide, methyl trisulfide, and diallyl disulfide, the most significant odorous Volatile organic compounds (VOCs) of Kimchi, decreased after treatment with the deodorants. In particular, baking soda and charcoal showed the highest efficiency in removing odorous compounds and VOCs from Kimchi, even after high-temperature processing. The acetic acid removal rates for both baking soda and charcoal were 99.9±0.0%. The heating process increases the deodorizing effects of baking soda. Sensory evaluation results showed that there is a significant increase (p < 0.05) in the overall preference for Kimchi samples packaged with charcoal and baking soda. This study provides useful information for the deodorization effects of natural deodorants for Kimchi smell and their applicability for packaging materials.