• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.21-24
• /
• 2003

In hot forming process of the backward end-bulkhead of a pressure hull, the blank diameter and the tool clearance are the critical factors which influence wrinkling defect, forming load and shape completeness of the product. Two F.E.A softwares with the elasto-plastic material model and rigid plastic model were utilized to predict the occurrence of wrinkling defect. Tool clearance was determined by considering the increase of blank thickness, die strength and the stretching effect. Heat treatment condition after the hot forming to recover the original properties of the material was estabilished by specimen-based heat treating experiment.

• 공업화학
• /
• 제3권2호
• /
• pp.341-348
• /
• 1992

PVC에 acrylonitrile butadiene rubber(NBR), 가교제, 가소제를 첨가하여 블렌딩하고 난 다음 방사선 조사하여 이들의 겔화율, 신장률, 열변형률 및 열수축 특성을 검토하였다. 가교제의 종류에 따른 겔화율은 단위중량당 불포화도가 높은 가교제일수록 컸으며, PVC에 NBR을 혼합하면 가교제나 가소제의 종류에 관계없이 NBR을 혼합하지 않은 것에 비해 월등히 향상되었다. 겔화율과 열변형률과의 관계에서 겔화율은 방사선 조사량의 증가에 따라 증가하였고 열변형률은 현격히 감소하였다. 열수축률은 연신온도가 낮을수록 또한 annealing 온도가 높을수록 증가하는 경향을 보였다.

• The Journal of Korean Physical Therapy
• /
• 제21권4호
• /
• pp.1-7
• /
• 2009

Purpose: Cervical pain is caused mainly by a static position, lasting work, bad habits and stress, and is accompanied by pain in the upper trapezius. Traditionally, heat and traction, exercise, mobilization, manipulation have been used to treat cervical pain. This study examined the effect of stretching and manipulation (high-velocity low-amplitude: HVLA) on the pain and ROM in women with chronic cervical and upper shoulder pain. Methods: Fifty-two women diagnosed with chronic cervical and upper shoulder pain were enrolled in this study. Among them, 26 patients (experiment group) were managed by passive stretching and manipulation, and another 26 patients (control group) were treated with physical therapy intervention (hat pack: HP, transcutaneous electrical nerve stimulation: TENS, ultra sound: US). Each group made use of a Visual Analogue Scale (VAS) and the highly reliable (flextion: 0.92, extention: 0.99) cervical range of motion (CROM) to compare the possible changes in pain and ROM in the two groups after treatment. Results: In the experimental group, the pain decreased and the ROM has increased in all directions. In the control group, the pain decreased but the ROM was not changed in all directions. Conclusion: According to the results, passive stretching and manipulation is effective for increasing the ROM and decreasing the level of pain. Moreover, physical therapy intervention (HP, TENS, US) is effective for immediately decreasing the pain but has little effect on the ROM.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1207-1212
• /
• 2004

A model for the phonon dispersion relationship for cubic zinc sulfide structure, for example SiC, is developed in terms of two unknown force constants. Born model that incorporates bond bending and bond stretching, is used for the force constants. The force constants are determined by fitting to experimental data. Using only the nearest-neighbor coupling results in $6{\times}6$ sized dynamic matrix. The eigenvalues of dynamics matrix for each wavenumber in 3-D ${\kappa}$ space correspond to frequencies, 3 for optical phonon and 3 for acoustic phonon, which is so-called dispersion relation (${\kappa}$-${\omega}$). The density of state is determined by counting the states for each frequency bin, and the properties such as specific heat and thermal conductivity can be obtained. The specific heat is estimated on this model and compared with experiment and other models, i.e. Debye model, Einstein model and combined Debye-Einstein model. In spite of the simple bond potential model, reasonable agreements are found.

• Nuclear Engineering and Technology
• /
• 제49권8호
• /
• pp.1636-1644
• /
• 2017

The main purpose of this article is to describe the magnetohydrodynamic stagnation point flow of Walter-B nanofluid over a stretching sheet. The phenomena of heat and mass transfer are based on the involvement of thermal radiation and chemical reaction. Characteristics of Newtonian heating are given special attention. The Brownian motion and thermophoresis models are introduced in the temperature and concentration expressions. Appropriate variables are implemented for the transformation of partial differential frameworks into sets of ordinary differential equations. Plots for velocity, temperature, and nanoparticle concentration are displayed and analyzed for governing parameters. The skin friction coefficient and local Nusselt and Sherwood numbers are studied using numerical values. The temperature and heat transfer rate are enhanced within the frame of the thermal conjugate parameter.

• Nuclear Engineering and Technology
• /
• 제49권8호
• /
• pp.1660-1668
• /
• 2017

The flow of liquids submerged with nanoparticles is of significance to industrial applications, specifically in nuclear reactors and the cooling of nuclear systems to improve energy efficiency. The application of nanofluids in water-cooled nuclear systems can result in a significant improvement of their economic performance and/or safety margins. Therefore, in this paper, Marangoni thermal convective boundary layer dusty nanoliquid flow across a flat surface in the presence of solar radiation is studied. A two phase dusty liquid model is considered. Unlike classical temperature-dependent heat source effects, an exponential space-dependent heat source aspect is considered. Stretching variables are utilized to transform the prevailing partial differential system into a nonlinear ordinary differential system, which is then solved numerically via the Runge-Kutta-Fehlberg approach coupled with a shooting technique. The roles of physical parameters are focused in momentum and heat transport distributions. Graphical illustrations are also used to consider local and average Nusselt numbers. We examined the results under both linear and quadratic variation of the surface temperature. Our simulations established that the impact of Marangoni flow is useful for an enhancement of the heat transfer rate.

• 대한기계학회논문집
• /
• 제11권2호
• /
• pp.214-221
• /
• 1987

본 논문에서는 2차원충돌분류에서 사각리브(rib)를 갖는 요철형전열면에 대한 실험에 관한 것이며, 리브의 높이를 (ｅ=5nm) 일정하게 하고 리브의 피치(ｐ=25,35,50 nm) 변화, 노즐출구와 전열면간 거이(H/B=1~14) 및 노즐출구유속(ｕ$_{e}$=12.30~ 18.07m/s)의 변화에 따른 전열특성을 실험적으로 구명하고 평판전열면의 경우와 비교 검토한다. 또한 스모크와이어(smoke-wire)법으로 평판 및 리브판에서의 유체의 거동 을 가시화하여 전열기구의 정성적 특성을 검토하는데 목적이 있다.

• 소성∙가공
• /
• 제9권6호
• /
• pp.582-589
• /
• 2000

In recent automotive industry, vehicle weight can be reduced by one-step forming of tailored blanks welded with two or more sheets of metal blanks. Mash seam welding shows an overlap joint, a much wider welding area, and heat affected zone(HAZ) than a laser welding. This paper deals with the forming characteristics of mash seam welded tailored blanks. Mash seam welded blanks of same or different thickness combinations were prepared, and tensile, hardness, erichsen, and dome stretching tests were done.

• 대한물리치료과학회지
• /
• 제6권2호
• /
• pp.943-951
• /
• 1999

Thoracic outlet syndrome's chief symptom has numbness and tingling sensation of tharm, hand and fingers. In the morning, patient complain of pins and needles of the hands and weakness. TOS classified three categories : Anterior scalene syndrome, Claviculocostal syndrome, Pectoralis minor syndrome Physical therapy of the TOS is heat, massage for soft tissue, stretching exercise for scalene muscles and pectoralis minor muscles, and strengthening exercise for upper trapezius and levator scapular and neck muscles. A main problem of soft tissue is mechanical causes, so physical therapists have to solve that problem by mechanical manual methods.

• 한국산학기술학회논문지
• /
• 제17권3호
• /
• pp.380-388
• /
• 2016

본 논문에서는 판형 열교환기 등에 널리 이용되고 있는 순 티타늄 판재의 프레스 성형성을 평가하기 위해 인장실험을 수행하였고 인장실험결과를 가장 잘 피팅할 수 있는 가공경화 모델을 제안하였다. 또한 항복곡면의 도출을 위해 단축변형, 평면변형, 순수전단변형 등 다양한 변형모드 하에서의 인장실험을 실시하였다. 이 제안된 모델을 Hora의 수정된 최대하중조건식에 적용하여 프레스 성형성을 평가하기 위해서 널리 사용되고 있는 성형한계선을 예측하였고 그 결과를 장출성형실험에서 구한 성형한계선과 비교하였다. 도출한 항복곡면을 잘 묘사하기 위한 이방성 항복조건식과 본 연구에서 제안된 가공경화 모델은 순 티타늄 판재의 프레스 성형성의 척도인 성형한계선을 잘 예측함을 알 수 있었다.